49 crystal oscillator recommended soldering pattern pull range (unit: mm) 1.3 3.0 5.8 3.0 1.3 3.8 external dimensions specifications (characteristics) (unit: mm) 9.8 max. 8.65 14.0 max. 4.06 4.7 max. 0.25 min 0.51 5.08 0.25 7.62 # 4 # 3 # 1 # 2 vg4010 dvk 27.0000m 9357a e pull range 180 x 10 -6 150 x 10 -6 crystal unit s frequency < 20 mhz , vc=0.0 to 3.0 v crystal unit s frequency 20 mhz , vc=0.0 to 3.0 v remarks 1 v c 2 gnd 3 out 4 v dd no. pin terminal voltage-controlled crystal oscillator vg- 4000 series high accuracy and high reliability due to trimmerless design. built-in heat resistive at-cut crystal provides heat resistance equivalent to that of general-purpose ics. use of c-mos ic assures low current consumption. excellent shock resistance and environmental capability. supply voltage: 5 v(vg-4010ja) supply voltage: 3.3 v(vg-4030ja) item output frequency range power source voltage temperature range soldering condition frequency stability current consumption pull range input resistance frequency change polarity duty output voltage output load condition (fan out) output rise time output fall time oscillation start up time aging shock resistance symbol f 0 v dd -gnd v dd t stg t opr t sol ? f/f 0 lop ? f c z in t w / t v oh v ol n/c l t tlh t thl t osc fa s.r. vg-4010ja dvk vg-4030ja dvk specifications 2.0000 mhz to 28.63636 mhz -0.5 v to +7.0 v 5.0 v 0.25 v 3.3 v 0.17 v -55 c to +125 c -20 c to + 70 c(-40 c to + 85 c) twice at under +260 c within 10 s 35 x 10 -6 max. 37 x 10 -6 max. 35 ma max. 18 ma max. 75 x 10 -6 as per below table 10 m ? min. positive polarity 45 % to 55 %(40 % to 60 %) 40 % to 60 % v dd -0.4 v min. 0.4 v max. 2 ttl or 30 pf max. 30 pf max. 5 ns max. 6 ns max. 8 ns max. 5 ns max. 6 ns max. 8 ns max. 10 ms max. 5 x 10 -6 max. 10 x 10 -6 max. remarks ? vc=0.5 to 4.5 v(4010ja) / vc=0.0 to 3.0 v(4030ja) no load condition vc=0.5 to 4.5 v(4010ja) / vc=0.0 to 3.0 v(4030ja) dc level vc=0.5 to 4.5 v(4010ja) / vc=0.0 to 3.0 v(4030ja) 1/2vdd level(1.4 v level ) i oh = -0.8 ma i ol =3.2 ma ttl load/c-mos load c-mos load: 20 % 80 % v dd level ttl load: 0.4 v 2.4 v level c-mos load: 20 % 80 % v dd level ttl load: 0.4 v 2.4 v level time at minimum operating voltage to be 0 s ta=+25 c, first year three drops on a hard board from 750 mm or excitation test with 29400 m/s 2 x 0.3 ms x 1/2sine wave in 3 directions max. supply voltage operating voltage storage temperature operating temperature actual size vc should be "gnd" or "open" when power is on. ? please contact us for inquiries about the available frequency. please consult us for pull range.
1 part numbering system voltage controlled crystal oscillators (vcxo) vg-1011 28.6363m k 0 packaging tape and reel 0: 1000pcs per reel 3: 250pcs per reel ja v a voltage controlled x?tal oscillators 1011: vcxo, 5v 4010: vcxo, 5v 4030: vcxo, 3.3v ja: 4 pin ?j? lead smd frequency 4 decimal places min. 1011: 1.5~28.63636mhz 4010/4030: 2.0~28.63636mhz frequency stability s: +/-15ppm a: +/-20ppm b: +/-25ppm d: +/-37ppm op. temp v: -20 ~ +70c w: -30 ~ +75c x: -40 ~ +85c frequency pull range (min) b: +/-20ppm g: +/-50ppm k: +/-75ppm k: +/-150ppm (4030 min only) n: +/-100ppm 4010 ? dvk avn avk avg 1011 bvn bvk bvg swb 4030 dvk range 150ppm min
|
