View 6N139_7113946.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only part no. : 6n138 / 6N139 series page : 1 of 15 bns-od-c131/a4 description these high gain series couplers use a light emitter diode and an integrated high gain photo detector to provide extremely high current transfer ratio between input and output. separate pins for the photodiode and output stage result in ttl compatible saturation voltage and high speed operation. where desired the vcc and vo terminals may be tied together to achieve conventional photo darlington operation. a base access terminal allows a gain bandwidth adjustment to be made. dec.2008 functional diagram nc anode cathode nc v o v b gnd v cc truth table (positive logic) led out on l off h a 0.1 f bypass capacitor must be connected between pin8 and pin5 6n138 / 6N139 applications ? digital logic ground isolation ? low input current line receiver ? telephone ring detector ? eia-rs-232c line receiver ? current loop receiver ? high common mode noise line receiver features high current transfer ratio C 2000% typical. low input current requirements C 0.5ma high output current C 60ma ctr guarantee C 0~70 . instantaneous common mode rejection 10kv/ sec ttl compatible output C 0.1v v ol typical ul, csa approved . 6n138, 6N139 single channel, high speed optocouplers http://www.tenand.com ??e?????e?t1??? shenzhen tenand technology co.,ltd
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only ordering information part no. : 6n138 / 6N139 series page : 2 of 15 bns-od-c131/a4 minimum cmr part option dv/dt (v/ s) v cm (v) ctr remarks single channel, dip-8 m single channel, wide lead spacing 6n138 s 400 single channel, smd-8 single channel, dip-8 m single channel, wide lead spacing 6N139 s 1,000 10 300 single channel, smd-8
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only outline dimensions 8-pin dip package (6n138 / 6N139) part no. : 6n138 / 6N139 series page : 3 of 15 bns-od-c131/a4 *1. year date code. *2. 2-digit work week. *3. factory identification mark (z : taiwan, y : thailand). dimensions are in millimeters and (inches).
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only outline dimensions 8-pin dip wide lead spacing package (6n138m / 6N139 m) part no. : 6n138 / 6N139 series page : 4 of 15 bns-od-c131/a4 *1. year date code. *2. 2-digit work week. *3. factory identification mark (z : taiwan, y : thailand). dimensions are in millimeters and (inches).
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only outline dimensions 8-pin dip surface mount package (6n138s / 6N139s) part no. : 6n138 / 6N139 series page : 5 of 15 *1. year date code. *2. 2-digit work week. *3. factory identification mark (z : taiwan, y : thailand). dimensions are in millimeters and (inches).
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only taping dimensions part no. : 6n138 / 6N139 series page : 6 of 15 bns-od-c131/a4 description symbol dimensions in millimeters ( inches ) tape wide w 16 0.3 ( .63 ) pitch of sprocket holes p0 4 0.1 ( .15 ) distance of compartment f p2 7.5 0.1 ( .295 ) 2 0.1 ( .079 ) distance of compartment to compartment p1 12 0.1 ( .472 ) 6n138s/6N139s-ta1 6n138s/6N139s-ta
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only recommended lead free reflow profile part no. : 6n138 / 6N139 series page : 7 of 15 bns-od-c131/a4
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only absolute maximum ratings*1 parameter symbol device min typ max units storage temperature t st -55 125 o c operating temperature t a -20 85 o c isolation voltage v iso 5000 v rms supply voltage v cc 15 v lead solder temperature * 2 t sol 6n138 6N139 260 c input average forward input current i f 20 ma reverse input voltage v r 5 v input power dissipation p i 6n138 6N139 35 mw output average output current i o 6n138 6N139 50 ma 6n138 -0.5 7 supply voltage, output voltage vcc, v o 6N139 -0.5 18 v output collector power dissipation p o 6n138 6N139 100 mw part no. : 6n138 / 6N139 series page : 8 of 15 bns-od-c131/a4 1. ambient temperature = 25 o c, unless otherwise specified. stresses exceeding t he absolute maximum ratings can cause permanent damage to the device. exposure to absolute maximum ratings for long period s of time can adversely affect reliability. 2. 260 o c for 10 seconds. refer to lead free reflow profile .
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only electrical specifications part no. : 6n138 / 6N139 series page : 9 of 15 bns-od-c131/a4 parameters test condition symbol device min typ max units input input forward voltage i f =1.6ma, t a =25 v f 1.1 1.7 v input forward voltage temperature coefficient if=1.6ma v f / ta -1.9 mv/ input reverse voltage i r = 10 a t a =25 bv r 5 - - v input capacitance v f =0; f=1mh z c in 6n138 6N139 - 60 - pf detector i f =1.6ma;vo=0.4v; vcc=4.5v 6n138 300 1600 2600 i f =0.5ma;vo=0.4v; vcc=4.5v 400 2000 5000 current transfer ratio i f =1.6ma;vcc=0.4v; vcc=4.5v ctr 6N139 500 1600 2600 % i f =1.6ma;vcc=4.5v; i o =4.8ma 6n138 - 0.1 0.4 i f =0.5ma;vcc=4.5v; i o =2ma i f =1.6ma;vcc=4.5v; i o =8ma i f =5ma;vcc=4.5v; i o =15ma - 0.1 logic low output voltage i f =12ma;vcc=4.5v; i o =24ma v ol 6N139 - 0.2 0.4 v i f =0ma, vo=vcc=7v t a =25 6n138 - 0.05 250 logic high output current i f =0ma, vo=vcc=18v t a =25 i oh 6N139 - 0.1 100 a logic low supply current i f =1.6ma, v o =open (vcc=18v) i ccl 6n138 6N139 - 0.4 1.5 m a logic high supply current i f =0ma, v o =open ; t a =25 (vcc=18v) i cch 6n138 6N139 - 0.01 10 ua *all typical at t a =25 c
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only switching specifications (ac) t a =0~70 , vcc=5v, unless otherwise specified. part no. : 6n138 / 6N139 series page : 10 of 15 bns-od-c131/a4 parameter test condition symbol device min typ max units i f =1.6ma; r l = 2.2k 6n138 - 1.6 10 i f =0.5ma; r l =4.7k - 5 25 propagation delay time to low output level i f =12ma; r l =270 t phl 6N139 - 0.1 1 s i f =1.6ma; r l = 2.2k 6n138 - 10 35 i f =0.5ma; r l =4.7k - 18 60 propagation delay time to high output level i f =12ma; r l =270 t plh 6N139 - 2 7 s kv/ s logic high common mode transient immunity i f =0ma; |v cm |=10v p-p r l =2.2k |cm h | 6n138 6N139 1 10 - kv/ s kv/ s logic low common mode transient immunity i f =1.6ma; |v cm |=10v p-p r l =2.2k |cm l | 6n138 6N139 1 10 - kv/ s *all typical at t a =25 c
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only isolation characteristics part no. : 6n138 / 6N139 series page : 11 of 15 bns-od-c131/a4 parameter test condition symbol min typ max units input-output insulation leakage current 45% rh, t = 5s, v i-o = 3kv dc, t a = 25 o c i i-o 1.0 a withstand insulation test voltage rh 50%, t = 1min, t a = 25 o c v iso 5000 v rms input-output resistance v i-o = 500v dc r i-o 10 12 *all typical at t a =25 c notes, 1. ac for 1 minute, r.h. = 40 ~ 60%. isolation volt age shall be measured using the following method. (1) short between anode and cathode on the primary side and between collector and emitter on the secon dary side. (2) the isolation voltage tester with zero-cross ci rcuit shall be used. (3) the waveform of applied voltage shall be a sine wave. 2. for 10 seconds 3. current transfer ratio (ctr) is defined as the r ation of output collector current, io, to the forwa rd led input current, if, times 100%. 4. pin 7 open. 5. instantaneous common mode rejection voltage "out put (1)" represents a common mode voltage variation that can hold the output above (1) level (vo>2.0v).instantan eous common mode rejection voltage "output (0)" rep resents a common mode voltage variation that can hold the o utput above (0) level (vo<0.8v). 6. device considered a two terminal device. pins 1, 2, 3 and 4 shorted together and pins 5, 6, 7 and 8 shorted together.
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only switching time test circuit figure 1: single channel test circuit for t phl and t plh figure 2: single channel test circuit for common mo de transient immunity part no. : 6n138 / 6N139 series page : 12 of 15 bns-od-c131/a4
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only characteristics curves part no. : 6n138 / 6N139 series page : 13 of 15 bns-od-c131/a4 figure 3 : dc transfer characteristics figure 4: current transfer ratio vs. forward current figure 7: 6N139 propagation delay vs. temperature figure 8 : 6n138 propagation delay vs. temperature figure 5: output current vs. input diode forward current figure 6: input diode forward current vs . forward voltage
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only characteristics curves part no. : 6n138 / 6N139 series page : 14 of 15 bns-od-c131/a4 figure 11: non-saturated rise and fall time vs. load resistance figure 1 0: forward voltage vs. temperature figure 12 : logic low supply current vs. forward current figure 9 : 6N139 propagation delay vs. temperature
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only notes: part no. : 6n138 / 6N139 series page : 15 of 15 bns-od-c131/a4 specifications of the products displayed herein are subject to change without notice. the products shown in this publication are designed for the general use in electronic applications suc h as office automation equipment, communications devices , audio/visual equipment, electrical instrumentation and application. for equipment/dev ices where high reliability or safety is required, such as space applications, nuclear power control equipm ent, medical equipment, etc, please contact our sales representatives.

▲Up To Search▲

Price & Availability of 6N139

	To Download 6N139 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .