View MSW2000-200-W_7098970.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 surface mount pin diode sp2t switches msw2000-200, msw2001-200 & msw2002-200 series datasheet description the msw2000-200, msw2001-200, and msw2002-200 series of surface mount silicon pin diode sp2t t-r switches is manufactured using aeroflex / metelics proven hybrid manufacturing process incorporating high voltage pin diodes and passive devices integrated within a ceramic substrate. this low profile, compact, surface mount component, (8mm l x 5mm w x 2.5 mm h) offers superior low and high signal performance to comparable mmic devices in qfn packages. the sp2t switches are designed in an asymmetrical topology to optimize tx-ant loss and tx-rx isolation performance. using pin diodes with lower thermal resistance (< 10 oc/w ), rf c.w. incident power levels of +50 dbm and rf peak incident power levels of +57 dbm are very achievable in higher power cold and hot switching applications @ +85 o c. the lower pin diode series resistance ( < 0.8 ), coupled with the longer minority carrier lifetime, ( > 2 s ), provides better iip3 distortion values > +65 dbm. applications the msw2000-200, msw2001-200, and msw2002-200 series sp2t switches are designed to be used in higher average and peak power switch applications, operating from 20 mhz to 6000 mhz, requiring high volume, surface mount, solder re-flow manufacturing. these products are durable, reliable, and capable of meeting all military, commercial, and industrial environments. the devices are fully rohs compliant. environmental capabilities the msw2000-200, msw2001-200, and msw2002-200 series sp2t switches are capable of meeting the environmental requirements of mil-std-202 and mil-std-750. esd and moisture sensitivity level rating pin diode switches are susceptible to esd conditions as with all semiconductors. the esd rating for this device is class 1c, hbm. the moisture sensitivity level rating for this device is msl 2 features ? surface mount sp2t switch in compact outline: 8mm l x 5mm w x 2.5 mm h ? higher average power handling than plastic (125 w c.w.) ? higher voltage > 500 volts for higher rf peak power (500 w) ? lower insertion loss ( 0.25 db ) & higher iip3 (65 dbm) ? operates from + voltage only (+5v, & +28v to +125v) ? rohs compliant
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 2 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 parameter symbol units test conditions minimum typical maximum value value value frequency f mhz 20 50 C 1000 1500 tx-ant insertion loss i l (tx) db 0 v @ 100 ma (tx ) | -0.15 | | -0.25 | 28v @ 25 ma (rx) ant-rx insertion loss i l (rx) db 0v@ 100 ma (rx ) | -0.25 | | -0.35 | 28v @ 0 ma (tx) tx-ant return loss r l (tx) db 0 v @ 100 ma (tx ) | -20 | | -22 | 28v @ 25 ma (rx) ant-rx return loss r l (rx) db 0 v @ 100 ma (rx ) | -20 | | -23 | 28v @ 0 ma (tx) tx-rx isolation i sol (rx) db 0 v @ 100 ma (tx ) | -48 | | -52 | 28v @ 25 ma (rx) rx-tx isolation i sol (tx) db 0 v @ 100 ma (rx ) | -22 | | -26 | 28v @ 0 ma (tx) c.w. incident power p inc (cw) dbm 0 v @ 100 ma (tx ) +50 i l (tx) 28v @ 25 ma (rx) ( note 3 ) 1.5:1 source & load vswr c.w. incident power pinc(cw) dbm 0v @ 100 ma (rx ) +43 i l (rx) 28v @ 0ma(tx) ( note 3 ) 1.5:1 source & load vswr peak. incident power pinc(pk) dbm 0 v @ 100 ma (tx ) +57 @ i l (tx) 28v @ 25 ma (rx) 10 s pulse, ( note 3 ) 1.5:1 source & load vswr 1 % duty switching speed ts s (10% -90% rf voltage) 2 3 input 3rd order iip3 dbm f1 = 500 mhz 60 65 intercept point f2 = 510 mhz p1 = p2 = +40 dbm msw2000-200 electrical specifications @ zo = 50 , t a =+ 25 oc (unless otherwise defined) sp2t pin diode switches
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 3 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 msw2001-200 electrical specifications @ zo = 50 , ta=+ 25 oc (unless otherwise defined) sp2t pin diode switches parameter symbol units test conditions minimum typical maximum value value value frequency f mhz 200 400 C 4000 4500 tx-ant insertion loss i l (tx) db 0 v @ 100 ma (tx ) | -0.3 | | -0.4 | 28v @ 25 ma (rx) ant-rx insertion loss i l (rx) db 0v@ 100 ma (rx ) | -0.4 | | -0.5 | 28v @ 0 ma (tx) tx-ant return loss r l (tx) db 0 v @ 100 ma (tx ) | -15 | | -18 | 28v @ 25 ma (rx) ant-rx return loss r l (rx) db 0 v @ 100 ma (rx ) | -15 | | -17 | 28v @ 0 ma (tx) tx-rx isolation i sol (rx) db 0 v @ 100 ma (tx ) | -32 | | -36 | 28v @ 25 ma (rx) rx-tx isolation i sol (tx) db 0 v @ 100 ma (rx ) | -12 | | -14 | 28v @ 0 ma (tx) c.w. incident power p inc (cw) dbm 0 v @ 100 ma (tx ) +50 i l (tx) 28v @ 0 ma (rx) ( note 3 ) 1.5:1 source & load vswr c.w. incident power pinc(cw) dbm 0v @ 100 ma (rx ) +43 i l (rx) 28v @ 0ma(tx) ( note 3 ) 1.5:1 source & load vswr peak. incident power p inc (pk) dbm 0 v @ 100 ma (tx ) +57 @ i l (tx) 28v @ 25 ma (rx) 10 s pulse, ( note 3 ) 1.5:1 source & load vswr 1 % duty switching speed ts s (10% -90% rf voltage) 1.5 2 input 3rd order iip3 dbm f1 = 1000 mhz 60 65 intercept point f2 = 1010 mhz p1 = p2 = +40 dbm
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 4 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 msw2002-200 electrical specifications @ zo = 50 , ta=+ 25 oc (unless otherwise defined) parameter symbol units test conditions minimum typical maximum value value value frequency f ghz 1.5 2 - 6 6.5 tx-ant insertion loss i l (tx) db 0 v @ 100 ma (tx ) | -0.6 | | -0.7 | 28v @ 25 ma (rx) ant-rx insertion loss i l (rx) db 0v@ 100 ma (rx ) | -0.9 | | -1.0 | 28v @ 0 ma (tx) tx-ant return loss r l (tx) db 0 v @ 100 ma (tx ) | -13 | | -15 | 28v @ 25 ma (rx) ant-rx return loss r l (rx) db 0 v @ 100 ma (rx ) | -11 | | -13 | 28v @ 0 ma (tx) tx-rx isolation i sol (rx) db 0 v @ 100 ma (tx ) | -32 | | -34 | 28v @ 25 ma (rx) rx-tx isolation i sol (tx) db 0 v @ 100 ma (rx ) | -11 | | -13 | 28v @ 0 ma (tx) c.w. incident power p inc (cw) dbm 0 v @ 100 ma (tx ) +50 i l (tx) 28v @ 25 ma (rx) ( note 3 ) 1.5:1 source & load vswr c.w. incident power pinc(cw) dbm 0v @ 100 ma (rx ) +43 i l (rx) 28v @ 0ma(tx) ( note 3 ) 1.5:1 source & load vswr peak. incident power p inc (pk) dbm 0 v @ 100 ma (tx ) +57 @ i l (tx) 28v @ 25 ma (rx) 10 s pulse, ( note 3 ) 1.5:1 source & load vswr 1 % duty switching speed ts s (10% -90% rf voltage) 1.0 1.5 input 3rd order iip3 dbm f1 = 2000 mhz 60 65 intercept point f2 = 2010 mhz p1 = p2 = +40 dbm
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 5 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 msw2000-200, msw2001-200 & msw2002-200 sp2t schematic tx ant dc rx rf bypass cap tx series diode rx series diode rx shunt diode electrical specification notes: 1. switching speed ( 50 % ttl C 10/90 % rf voltage ) is a function of the pin diode driver performance. a rc current spiking network is used on the driver output to provide a ic = c dv/dt transient current to move stored charge through the pin diode, typical values are: r = 50 C 220 and c = 470 C 1,000 pf. 2. aeroflex/metelics mpd2t28125-700 is the recommended pin diode driver to interface with the msw2000- 200, msw2001- 200, and msw2002-200 sp2t switches and its data sheet may be found at http://www.aeroflex.com/metelics. 3. pin diode d.c. reverse voltage to maintain high resistance in the off pin diode is determined by rf frequency, incident power, and vswr. the minimum d.c. reverse voltage values are provided on page 7 of this datasheet. +28v values shown in these specification tables are utilized for small signal testing ~0 dbm.
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 6 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 sp2t pin diode switches ttl pin diode driver tx ant dc rx 39 +5v ttl pin diode driver +28v +28v 1.1 k +28v +1v 0v 0v 0v ttl pin diode driver sp2t switch schematic with rf bias network and truth table
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 7 sp2t pin diode switches document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 rf bias network values part number f ( mhz ) dc blocking inductors rf bypass capacitors capacitors msw2000-200 50 C 1,000 0.1 f4.7 h0.1 f msw2001-200 400 C 4,000 27 pf 82 nh 270 pf msw2002-200 2,000 - 6,000 22 pf 33 h33 pf d.c. bias to rf truth table rf state ant bias tx bias rx bias dc bias tx-ant low loss & +5v @ +100 ma 0 v @ 100 ma +28v @ 25 ma 0 v @ 25 ma tx-rx isolation ant-rx low loss & +5 v @ +100 ma +28v @ 0 ma 0 v @ 100 ma +28 v @ 0 ma rx C tx isolation minimum reverse bias voltage @ tx, rx, dc ports vs. frequency for 100 w c.w. power with 1.5:1 vswr part number f ( mhz ) f ( mhz ) f ( mhz ) f ( mhz ) f ( mhz ) f ( mhz ) & & & & & & | - vdc | | - vdc | | - vdc | | - vdc | | - vdc | - vdc | msw2000-200 20 mhz 100 mhz 200 mhz 400 mhz 1,000 mhz 4,000 mhz | -120 v | | -110 v | | -85 v | | -55 v | | -28 v | na msw2001-200 20 mhz 100 mhz 200 mhz 400 mhz 1,000 mhz 4,000 mhz na na | -110 v | | -85 v | | -55 v | | -28 v | msw2002-200 1,000 mhz 2,000 mhz 3,000 mhz 4,000 mhz 5,000 mhz 6,000 mhz | -55 v | | -28 v | | -28 v | | -28 v | | -28 v | | -28 v | notes: 1. na denotes the switch is not defined for that frequency band.
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 8 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 sp2t pin diode switches absolute maximum ratings @ t a = + 25 oc ( unless otherwise defined ) parameter absolute maximum value forward current @ tx or rx 250 ma reverse voltage @ tx or rx | -125 | v reverse voltage @ dc | -125 | v forward diode voltage 1.2 v @ 250 ma operating temperature - 65 oc to +125 oc storage temperature - 65 oc to +150 oc junction temperature +175 oc assembly temperature +260 oc for 10 seconds c.w. incident power handling +50 dbm @ +85 oc case temperature source & load vswr = 1.5 :1 ( cold switching & hot switching ) notes 1, 2 peak incident power handling +57 @ 10 s pulse, 1 % duty source & load vswr = 1.5 :1 @ +85 oc case temperature ( cold switching & hot switching ) notes 1, 2 total dissipated rf & d.c. power 8.0 w @ +85 oc case temperature ( cold switching ) notes 1, 2 notes: 1. for hot switching, pin diode driver must transition from forward bias to reverse bias and reverse bias to forward bias within 100 s with a parallel rc spiking network at the driver output. 2. backside rf and d.c. grounding area of device must be completely solder attached to rf circuit board vias for proper electrical and thermal rf circuit grounding.
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 9 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 sp2t pin diode switches msw2000-200 small signal parametric performance msw2000-200 insertion loss vs. frequency -0.50 -0.45 -0.40 -0.35 -0.30 -0.25 -0.20 -0.15 -0.10 -0.05 0.00 100 200 300 400 500 600 700 800 900 frequency (mhz) insertion loss (db) tx-ant ant-rx msw2000-200 return loss vs. frequency -40 -35 -30 -25 -20 -15 -10 -5 0 150 244 338 431 525 619 713 806 900 frequency (mhz) return loss ( db ) tx-ant ant-rx
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 10 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 sp2t pin diode switches msw2001-200 small signal parametric performance msw2000-200 isolation vs. frequency -70 -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 100 213 325 438 550 663 775 888 1000 frequency (mhz) isolation (db) ant-rx tx-ant msw2001-200 insertion loss vs. frequency -0.50 -0.45 -0.40 -0.35 -0.30 -0.25 -0.20 -0.15 -0.10 -0.05 0.00 400 760 1120 1480 1840 2200 2560 2920 3280 3640 4000 frequency (mhz) insertion loss ( db ) tx-ant ant-rx
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 11 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 sp2t pin diode switches msw2001-200 return loss vs. frequency -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 400 760 1120 1480 1840 2200 2560 2920 3280 3640 4000 frequency (mhz) return loss (db) tx-ant ant-rx msw2001-200 isolation vs. frequency -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 400 760 1120 1480 1840 2200 2560 2920 3280 3640 4000 frequency (mhz) isolation ( db ) tx-ant ant-rx
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 12 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 msw2002-200 insertion loss vs frequency -1.20 -1.00 -0.80 -0.60 -0.40 -0.20 0.00 0.20 0.40 0.60 2000 2400 2800 3200 3600 4000 4400 4800 5200 5600 6000 frequency (mhz) loss (db) rx insert loss tx insert loss msw2002-200 return loss vs frequency -40 -35 -30 -25 -20 -15 -10 -5 0 2000 2400 2800 3200 3600 4000 4400 4800 5200 5600 600 0 frequency (mhz) loss (db) rx return loss tx return loss
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 13 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 msw2002-200 isolation vs frequency -70 -60 -50 -40 -30 -20 -10 0 2000 2400 2800 3200 3600 4000 4400 4800 5200 5600 600 0 frequency (mhz) loss (db) rx isol tx isol
thatched area is rf, d.c., and thermal ground. vias should be solid copper fill and gold plated for optimum heat transfer from backside of switch module through circuit vias to metal thermal ground. 603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 14 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 sp2t pin diode switches msw2000-200, msw2001-200 & msw2002-200 sp2t switch outline ( case style 200 ) rf circuit solder footprint for case style 200 ( cs200 ) note: thatched metal area on circuit side of device is rf, d.c. and thermal ground.
603-641-3800 ? 888-641--semi (7364) ? metelics-sales@aeroflex.com ? www.aeroflex.com/metelics 15 document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 sp2t pin diode switches profile feature sn-pb eutectic assembly pb-free assembly average ramp-up rate 3c/second maximum 3c/second maximum (t l to t p ) preheat - temperature minimum (t smin ) 100 c 150 c - temperature maximum (t smax ) 150 c 200 c - time (minimum to maximum) (t s ) 60-120 seconds 60-180 seconds t smax to t l - ramp-up rate 3c/second maximum time maintained above: - temperature (t l ) 183 c 217 c - time (t l) 60-150 seconds 60-150 seconds peak temperature (t p ) 225 +0 / -5c 245 +0/-5c time within 5c of actual peak temperature (t p ) 10-30 seconds 20-40 seconds ramp-down rate 6c/second maximum 6c/second maximum time 25c to peak temperature 6 minutes maximum 8 minutes maximum assembly instructions the msw2000-200, msw2001-200, sw2002-200 switches are capable of being placed onto circuit boards with pick and place manufacturing equipment from tube or tape-reel dispensing. the devices are attached to the circuit board using conventional solder re-flow or wave soldering procedures with rohs type or sn 63 / pb 37 type solders per table i and graph i time-temperature recommended profile. table 1: time-temperature profile for sn 60/pb40 or rohs type solders graph1: solder re-flow time-temperature function
aeroflex / metelics, inc. 54 grenier field road, londonderry, nh 03053 tel: (603) 641-3800 sales: (888) 641-semi (7364) fax: (603)-641-3500 975 stewart drive, sunnyvale, ca 94085 tel: (408) 737-8181 fax: (408) 733-7645 www.aeroflex.com/metelics metelics-sales@aeroflex.com document ds 12633 rev c, ecn 9765 revision date: 4/20/2011 our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused. aeroflex / metelics, inc. reserves the right to make changes to any products and services herein at any time without notice. consult aeroflex or an author- ized sales representative to verify that the information in this data sheet is cur- rent before using this product. aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by aeroflex; nor does the purchase, lease, or use of a product or service from aeroflex con- vey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of aeroflex or of third parties. copyright 2010 aeroflex / metelics. all rights reserved. i s o 9001:2008 certifie d com p anies part number packaging msw2000-200-t tube msw2000-200-r tape-reel quantities of 250 or 500 MSW2000-200-W waffle pack msw2001-200-t tube msw2001-200-r tape-reel quantities of 250 or 500 msw2001-200-w waffle pack msw2002-200-t tube msw2002-200-r tape-reel quantities of 250 or 500 msw2002-200-w waffle pack msw2000-200-e * rf evaluation board msw2001-200-e * rf evaluation board msw2002-200-e * rf evaluation board * rf evaluation boards are rated at +45 dbm c.w. or peak incident power due to the rf power rating values of the passive l,c bias elements part number ordering information:

▲Up To Search▲

Price & Availability of MSW2000-200-W

	To Download MSW2000-200-W Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .