do not scale from this print .1200 ref 3.048 .0550 1.397 .0100 ref 0.254 .0060 ref 0.152 "a" "a" -lc: locking clip option shown lc-08-tm-01 .2450 6.223 ref {(no of positions x .01969[.50]) + .2468[6.3]} .2850 ref 7.239 .0200 ref 0.508 .1500 ref 3.810 (no of positions -1) x .01969[.50] .1332 ref 3.384 .042 ref 1.07 bsh-xxx-01-d c2 02 01 cbsh-xxx-01-x-d-xx no of positions -030, -050, -060, -090, -120, -150 (per row) row specification -d: double (use bsh-xxx-01-d) option -a: alignment pins (use bsh-xxx-01-d-a) -lc: locking clips (use lc-08-tm-01) plating specification -c: electro-polished selective (use c-126-01-c) lead style -01: .1280 [3.25] .070 ref 1.765 .0980 ref 2.489 .1280 - .0010 + .0030 3.251 - 0.025 + 0.076 (see note 5) .2950 ref 7.493 .0425 ref 1.080 section "a"-"a" scale 5 : 1 c3 c1 c-126-01-x see table 1 .0350 ref 0.889 (no of positions x .01969 [.5001]) + .2018 [5.126] ref -a: alignment pin option shown bsh-xxx-01-d-a obsolete .0375 0.953 ref .0375 ref 0.953 r tube: pt-1-24-02-78 plug: tp-09 tube packaging view [parts to have position #1 loaded in same direction as arrow] sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.25] 2 .xxx: .005 [.13] .xxxx: .0020 [.050] material: .5mm double row socket assembly by: cbsh-xxx-01-x-d-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing b. perry 10/04/2007 1 1 sheet scale: 1.5:1 insulator: black lcp contact: phos bronze f:\dwg\misc\mktg\cbsh-xxx-01-x-d-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. burr allowance: .0015 [.038] max. 3. minimum pushout force: 6 oz. 4. maximum allowable bow: .002 [.051] inch/inch after assembly. 5. max varience of .002 [.051]. c flammability rating: ul 94v-o 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision a
|
