do not scale from this print .0500 (typ) 1.270 (tol non-accum) "d" .211 5.36 ref .0500 1.270 "a" (see section e-e) "b" ref .100 2.54 ref .025 ref(typ) 0.64 .140 3.56 "a" .050 1.27 ref .035 ref 0.89 c c l pin 01 c c c c c pin 04 .485 12.32 to wafer "h" ref (see table 3) .063 1.60 ref "f" ref .485 12.32 ref "l" ref "a" "a" 'g' c l "e" (ref)(alignment pin centers) .320 (typ) 8.13 .120 ref 3.05 .044 ref 1.12 "g" .034 ref 0.86 .308 ref 7.81 'e' 'e' pin 01 c l pin 04 c c "c" ref .040 1.02 ref .312 7.91 ref .025 ref (typ) 0.64 .103 (typ) .760 ref 19.30 .050 ref 1.26 .310 7.87 ref 'h' c (* = not engineering approved) no of rows -04,-06,*-08,*-10 ( * = not engineering approved) options -gp: guide post -k: kapton pad (see note 8) solder composition & style -1: 63% tin / 37% lead charge tail (use sub-im-t-1m64-xx-xx-x-1) -2: 95.5% tin / 3.8 silver / 0.7% copper lead free charge tail (use sub-im-t-1m64-xx-xx-x-2) right angle -ra plating specification -s: selective gold, matte tin on tails (use sub-im-t-1m64-01-xx-s-x) -l: light selective gold, matte tin on tails (use sub-im-t-1m64-xx-l-x) lead style -01 no of positions -20,-30,-40,-50 (per row) seam-xx-xx-x-xx-x-ra-xx-tr packaging -tr: tape & reel (standard packaging) (see note 4 and 7) c fig. 1 (seam-20-01-x-04-x-ra-gp) (some detail omitted for clarity) sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: seab-ra body by: seam-xx-xx-x-xx-x-ra-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 06/27/2008 4 1 sheet scale: 2:1 insulator: lcp color: black contact: phos bronze .006 thick f:\dwg\misc\mktg\seam-xx-xx-x-xx-x-ra-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 notes: 1. represents a critical dimension. 2. minimum push-out force: .50 lbs[2.2n]. 3. inspect dimension at 4 corners of part. 4. for quantities up to 49 pieces, no leader, trailer, or reel will be supplied for quantities of 50-124 pieces, no leader or trailer will be supplied. 5. note deleted 6. feature required for vision inspection 7. attach label "seax-0001" to each tape & reel package. 8. -k option requires 125 piece minimum order. revision b
"h" ref c l fig. 2 (seam-20-01-x-04-x-ra shown) (same as fig. 1 except as noted) (some detail removed for clarity) .485 12.32 ref sub-im-t-1m64-xx-x-x seam-xx-xx-ra-04 .050 ref 1.27 .059 1.51 "c" .050 (typ) 1.27 .085 2.16 .056 .005 1.42 0.13 .008 0.20 ref .277 7.05 .072 1.84 .011 ref 0.28 'f' section "a"-"a" scale 6 : 1 (rotated for clarity) c c c wt-28-01-t sub-im-t-1m64-xx-x-x seam-xx-xx-ra-04-gp c c c wt-47-01-n .044 1.12 (ref) .050 (typ) 1.27 .006 0.15 .010 .003 (typ) 0.25 0.08 .140 ref 3.56 "a" ref section 'e'-'e' scale 6 : 1 c .004 0.10 (see note 3) .0020 0.051 .054 ref 1.36 detail 'f' scale 12 : 1 c c c .006 .030 ref 0.76 .050 1.27 ref detail 'h' scale 6 : 1 (see note 6) .050 1.27 ref .075 1.91 ref detail 'g' scale 6 : 1 (see note 6) b sheet of seab-ra body by: seam-xx-xx-x-xx-x-ra-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 06/27/2008 4 2 sheet scale: 2:1 revision b f:\dwg\misc\mktg\seam-xx-xx-x-xx-x-ra-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"h" ref "h" ref "h" ref .585 14.86 to wafer .585 14.86 ref "b" "b" sub-im-t-1m64-xx-x-x seam-xx-xx-ra-06-gp c .412 10.45 ref .842 ref 21.39 .100 ref 2.54 (typ) section "b"-"b" scale 2 : 1 .685 17.40 to wafer .685 17.40 ref "c" "c" sub-im-t-1m64-xx-x-x seam-xx-xx-ra-08-gp c .785 19.94 to wafer .785 19.94 ref "d" "d" sub-im-t-1m64-xx-x-x seam-xx-xx-ra-10-gp c .100 ref 2.54 (typ) .612 15.53 ref 1.042 ref 26.47 section "d"-"d" scale 2 : 1 .100 ref 2.54 (typ) .512 12.99 ref .942 ref 23.93 section "c"-"c" scale 2 : 1 fig. 3 (seam-20-01-x-06-x-ra-gp) (same as fig. 1 except as noted) (some detail removed for clarity) fig. 4 (seam-20-01-x-10-x-ra-gp) (same as fig. 1 except as noted) (some detail removed for clarity) (not engineering approved) fig. 5 (seam-20-01-x-08-x-ra-gp) (same as fig. 1 except as noted) (some detail removed for clarity) (not engineering approved) sheet of seab-ra body by: seam-xx-xx-x-xx-x-ra-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 06/27/2008 4 3 sheet scale: 1:1 revision b f:\dwg\misc\mktg\seam-xx-xx-x-xx-x-ra-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
fig. 6 -k option (use k-dot-.295-.406-.005) (seam-20-01-x-04-x-ra-k shown) .295 7.49 .128 .02 3.25 0.5 "j" .02 [0.5] seam-xx-xx-ra-xx-xx "k" sheet of seab-ra body by: seam-xx-xx-x-xx-x-ra-xx-tr dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing r musser 06/27/2008 4 4 sheet scale: 2:1 revision b f:\dwg\misc\mktg\seam-xx-xx-x-xx-x-ra-xx-tr-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
