7.0 mm x 5.0 mm vcxo v85g series www.bliley.com 2545 west grandview blvd erie, pa. 16506 tel (814) 838-3571 page 1 of 4 rev 1.2 a description : the v85g voltage-controlled crystal oscillator (vcxo) series products provide a wide range of options in temperature stability, operating frequency range, and ultra low phase jitter in a 7.0 x 5.0 mm ceramic package with pecl or lvds outputs.. features : ? available in frequencies from 1.5 to 200 mhz ? tri-state enable/disable ? hermetically sealed ceramic smd package ? pecl / lvds outputs ? rohs-6/leadfree compliant ? integrated jitter 0.3 ps max. frequency range operating tempe rature freque ncy stability frequency operating temperature product code freq. stability product code -10 to +60c a +/- 25 ppm a 0 to +70c b +/- 50 ppm b -20 to 70c c 1.5 to 200.5 mhz -40 to 85c d frequency stability is inclusive of calibration at 25c, operating temp. range, input voltage variation , load variation, aging, shock, and vibration not all combinations of stability and temperature r anges available. aging: (typical at 20mhz after 30 days continuous operatio n) frequency timeframe aging product code 20 mhz 1st year +/- 5.0ppm n/a supply voltage (vs): power supply (vs) 2.5 vdc +/-10% 3.3 vdc +/-10% product code a b frequency versus voltage: 3.3 volt 5.0 volt 0 to 3.3v on pin 1 product code 0.5v to 4.5v on pin1 product code +/-100 ppm min n/a +/-100 ppm min n/a current consumption ( i dd ): i dd ( at 2.5v ) i dd ( at 3.3v ) pecl / lvds pecl / lvds frequency range ( mhz ) ma ma 1.500 to 64.999 75 / 45 75 / 45 65.000 to 200.000 100 / 80 100 / 80
7.0 mm x 5.0 mm vcxo v85g series www.bliley.com 2545 west grandview blvd erie, pa. 16506 tel (814) 838-3571 page 2 of 4 rev 1.2 a environmental: storage temperature -55 to +125 c output waveform: pecl pecl lvds lvds product code a b at 2.5 v at 3.3 v at 2.5 v at 3.3 v output logic 1 1.475 vmin 2.275vmin 1.6vmax 1.6vmax output logic 0 1.095 vmax 1.680vmax 0.9vmin 0.9vmin rise/fall time ( ns ) 1 max 1 max 1 max 1 max tri-state function pin 2: pin 2 = ouput active with 0.5 volts max on pin 2 pin2 = output in high impedance state when 2.0 volt s min. on pin 2 or 2.5 volts min ( for 3.3v supply ) ordering options: product family operating temperature temperature stability supply voltage output type operating frequency v85g a a a a xxx.xxxmhz v85g b b b b xxx.xxxmhz v85g c xxx.xxxmhz v85g d xxx.xxxmhz v85g a b b a 155.520 mhz part number b uild example **consult bliley sales if other options required rohs compliant ; -20 to 70c; +/- 50ppm; a 3.3 vol t supply;pecl outputs and 155.520 mhz nominal operating frequency. how to order this product: contact bliley technologies with product selection code from ordering options section above.
|
