dmo series ? mini-sip ssr ? ratings to 3a @ 60 v dc ? mosfet output ? dc control ? normally open output product selection control voltage 3 a 3-10 vdc DMO063 (4) available options output specifications (1) description dmo operating voltage range (47-63hz) [vdc] 0-60 maximum off-state leakage current @ rated voltage [a] 100 maximum load current [adc] 3.0 minimum load current [adc] 0 maximum surge current [adc] 12 (10ms) maximum on-state voltage drop @ rated current 0.4 (2) minimum power factor (with maximum load) 0.5 input specifications (1) description DMO063 control voltage range 3-10 vdc must turn on voltage 3.0 vdc must turn off voltage 1.0 vdc typycal input current @ 5 vdc 20 madc nominal input impedance 270 ohm maximum turn-on time [sec] 50 maximum turn-off time [sec] 300
general specifications description parameters dielectric strength, inpu t/output/base (50/60hz)(3) 4000 vrms minimum insulation resistance (@ 500 vdc)(3) 10 9 ohm maximum capacitance, input/output 8 pf ambient operating temperature range -30 to 80 c ambient storage temperature range -30 to 125 c weight (typical) 0.15 oz. (4.3g) encapsulation thermally conductive epoxy general notes 1) all parameters at 25c unless otherwise specified. 2) typical on-state resistance=.13 3) dielectric and insulation resistance are measured between input and output 4) inductive loads should be diode suppressed mechanical specifications thermal derate information agency approvals designed in accordance with the requirements of iec 62314 rev. 120911
annex - enviromental information
|
