View PS8601L-V-E3-A_7206208.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

the mark shows major revised points. the revised points can be easily s earched by copying an "" in the pdf file and specifying it in the "find what:" field. data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. photocoupler ps8601,ps8601l,ps8601l1,ps8601l2 high speed analog output type 8-pin photocoupler ? nepoc series ? document no. pn10262ej02v0ds (2nd edition) date published may 2006 ns cp(k) printed in japan 1995, 2006 description the ps8601 and ps8601l are 8-pin high s peed photocouplers containing a gaai as led on input side and a pn photodiode and a high speed amplifier transis tor on output side on one chip. the ps8601 is in a plastic dip (dual in- line package). the ps8601l is lead bending type (gull wing) for surface mount. the ps8601l1 is lead bending type for long creepage distance. the ps8601l2 is lead bending type for long creepage di stance (gull-wing) for surface mount. features ? high supply voltage (v cc = 35 v max.) high speed response (t phl , t plh = 0.8 s max.) high isolation voltage (bv = 5 000 v r.m.s. ) ttl, cmos compatible with a resistor for infrared reflow soldering ordering number of tape product : ps8601l-e3, e4: 1 000 pcs/reel : ps8601l2-e3, e4: 1 000 pcs/reel safety standards ul approved: file no. e72422 bsi approved: no. 8004, 8854 din en60747-5-2 (vde0884 pa rt2) approved (option) applications interface for measurem ent or control equipment substitutions for relays and pulse transformers
data sheet pn10262ej02v0ds 2 ps8601,ps8601l,ps8601l1,ps8601l2 package dimensions (unit: mm) dip type ps8601 9.250.25 6.5 0.5 0 to 15? 7.62 12 4 3 65 87 top view 2.54 0.840.43 3.50.3 0.65 4.150.3 2.8 min. 1.250.15 0.25 m 0.50.1 0.880.1 1. nc 2. anode 3. cathode 4. nc 5. emitter 6. v o 7. base 8. v cc lead bending type top view ps8601l 6.50.5 0.90.25 9.600.4 2.54 0.25 m 1.250.15 3.50.3 9.250.25 12 4 3 65 87 0.880.1 1. nc 2. anode 3. cathode 4. nc 5. emitter 6. v o 7. base 8. v cc 0.1 +0.1 ?0.05 0.25 +0.1 ?0.05
data sheet pn10262ej02v0ds 3 ps8601,ps8601l,ps8601l1,ps8601l2 lead bending type for long creepage distance ps8601l1 9.250.25 6.5 0.5 0 to 15? 10.16 ps8601l2 6.5 0.5 0.90.25 11.80.4 0.25 0.2 9.250.25 10.16 2.54 0.840.43 3.50.3 0.35 4.55 max. 2.8 min. 1.250.15 0.25 m 0.50.1 0.880.1 2.54 0.25 m 1.250.15 3.50.3 0.880.1
data sheet pn10262ej02v0ds 4 ps8601,ps8601l,ps8601l1,ps8601l2 marking example ps8601 nl601 no. 1 pin mark country assembled type number assembly lot 6 01 year assembled (last 1 digit) l n rank code in-house code (l: pb-free) week assembled
data sheet pn10262ej02v0ds 5 ps8601,ps8601l,ps8601l1,ps8601l2 ordering information part number order number solder plating specification packing style safety standard approval application part number *1 ps8601 ps8601-a pb-free magazine ca se 50 pcs standard products ps8601 ps8601l ps8601l-a (ul, bsi approved) ps8601l1 ps8601l1-a ps8601l2 ps8601l2-a ps8601l-e3 ps8601l-e3-a embossed tape 1 000 pcs/reel ps8601l-e4 ps8601l-e4-a ps8601l2-e3 ps8601l2-e3-a ps8601l2-e4 ps8601l2-e4-a ps8601-v ps8601-v-a magazine case 50 pcs din en60747-5-2 ps8601l-v ps8601l-v -a (vde0884 part2) ps8601l1-v ps8601l1-v-a approved (option) ps8601l2-v ps8601l2-v-a ps8601l-v-e3 PS8601L-V-E3-A embossed tape 1 000 pcs/reel ps8601l-v-e4 ps8601l-v-e4-a ps8601l2-v-e3 ps8601l2-v-e3-a ps8601l2-v-e4 ps8601l2-v-e4-a *1 for the application of the safety st andard, following part number should be used. absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current *1 i f 25 ma reverse voltage v r 5 v power dissipation p d 45 mw detector supply voltage v cc 35 v output voltage v o 35 v output current i o 8 ma power dissipation *2 p c 100 mw isolation voltage *3 bv 5 000 vr.m.s. operating ambient temperature t a ? 55 to +100 c storage temperature t stg ? 55 to +100 c *1 reduced to 0.25 ma/ c at t a = 25 c or more. *2 applies to output pin v o (collector pin). reduced to 1.0 mw/ c at t a = 25 c or more. *3 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output. pins 1-4 shorted together , 5-8 shorted together.
data sheet pn10262ej02v0ds 6 ps8601,ps8601l,ps8601l1,ps8601l2 electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. *1 max. unit diode forward voltage v f i f = 16 ma 1.7 2.2 v reverse current i r v r = 5 v 10 a forward voltage temperature coefficent ? v f / ? t i f = 16 ma ? 1.6 mv/ c terminal capacitance c t v = 0 v, f = 1 mhz 30 pf detector high level output current i oh (1) i f = 0 ma, v cc = v o = 5.5 v 3 500 na high level output current i oh (2) i f = 0 ma, v cc = v o = 35 v 100 a low level output voltage v ol i f = 16 ma, v cc = 4.5 v, i o = 1.2 ma 0.1 0.4 v low level supply current i ccl i f = 16 ma, v o = open, v cc = 35 v 50 a high level supply current i cch i f = 0 ma, v o = open, v cc = 35 v 0.01 1 a dc current gain h fe v o = 5 v, i o = 3 ma 100 coupled current transfer ratio ctr i f = 16 ma, v cc = 4.5 v, v o = 0.4 v 15 % isolation resistance r i-o v i-o = 1 kv dc 10 11 ? isolation capacitance c i-o v = 0 v, f = 1 mhz 0.7 pf propagation delay time t phl i f = 16 ma, v cc = 5 v, r l = 1.9 k ? 0.5 0.8 s (h l) *2 propagation delay time t plh i f = 16 ma, v cc = 5 v, r l = 1.9 k ? 0.3 0.8 s (l h) *2 *1 typical values at t a = 25 c *2 test circuit for propagation delay time 18 27 36 45 i f 51 ? v cc = 5 v (monitor) v o r l c l = 15 pf 0.1 f input output pulse input i f monitor pw = 100 s duty cycle = 1/10 ( ) 50 % 1.5 v 5 v v ol t phl t plh remark c l includes probe and stray wiring capacitance. usage cautions 1. this product is weak for static el ectricity by designed with hi gh-speed integrated circuit so protect against static electricity when handling. 2. by-pass capacitor of more than 0.1 f is used between v cc and gnd near device. al so, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. avoid storage at a high te mperature and high humidity.
data sheet pn10262ej02v0ds 7 ps8601,ps8601l,ps8601l1,ps8601l2 typical characteristics (t a = 25 c, unless otherwise specified) forward voltage v f (v) forward current i f (ma) forward current vs. forward voltage ambient temperature t a (?c) maximum forward current i f (ma) maximum forward current vs. ambient temperature ambient temperature t a (?c) detector power dissipation p c (mw) detector power dissipation vs. ambient temperature output voltage v o (v) output current i o (ma) output current vs. output voltage ambient temperature t a (?c) normalized current transfer ratio ctr normalized current transfer ratio vs. ambient temperature foward current i f (ma) current transfer ratio ctr (%) current transfer ratio vs. foward current 30 20 10 0 25 50 75 100 125 120 80 40 0 25 50 75 100 125 100 60 20 0.01 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 0.1 1.0 10 100 t a = +100 ?c +50 ?c +25 ?c 0 ?c ?25 ?c 10 4 0 8 6 2 4 8 18 20 16 2 6 10 12 14 i f = 25 ma 20 ma 15 ma 10 ma 5 ma v cc = 4.5 v, v o = 0.4 v, t a = 25 ?c 50 40 30 20 10 0 0.1 0.5 1 5 10 50 100 normalized to 1.0 at t a = 25 ?c, i f = 16 ma, v cc = 4.5 v, v o = 0.4 v ?75 ?50 ?25 0 25 50 75 100 125 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 remark the graphs indicate nominal characteristics.
data sheet pn10262ej02v0ds 8 ps8601,ps8601l,ps8601l1,ps8601l2 foward current i f (ma) output voltage v o (v) output voltage vs. foward current load resistance r l (k ? ) propagation delay time t phl , t plh ( s) propagation delay time, vs. lord resistance ambient temperature t a (?c) propagation delay time, vs. ambient temperature ambient temperature t a (?c) high level output current i oh (na) high level output current vs. ambient temperature v cc = 5 v, i f = 16 ma t plh t phl 10 1 0.1 10 k 100 k 1 k 6 7 5 4 2 0 3 1 12 16 20 48 26 10 14 18 10 k ? 5.6 k ? r l = 1.9 k ? 1 000 1 0.1 100 10 50 100 ?25 0 25 75 v cc = v o = 35 v v cc = v o = 5.5 v i f = 0 ma propagation delay time t phl , t plh ( s) t phl t plh v cc = 5 v, i f = 16ma, r l = 1.9 k ? ?75 ? 50 ? 25 0 25 50 75 100 125 3.0 2.5 2.0 1.5 1.0 0.5 0.0 v cc = 5 v r l v cc i f remark the graphs indicate nominal characteristics.
data sheet pn10262ej02v0ds 9 ps8601,ps8601l,ps8601l1,ps8601l2 taping specifications (unit: mm) tape direction ps8601l-e3 ps8601l-e4 outline and dimensions (tape) 1.550.1 2.00.1 4.00.1 1.750.1 4.5 max. 10.40.1 12.00.1 outline and dimensions (reel) packing: 1 000pcs/reel 3302.0 1001.0 2.00.5 13.00.2 r 1.0 21.00.8 2.00.5 1.5 +0.1 ?0 7.50.1 10.30.1 16.00.3 4.0 0.1 0.3 15.9 to 19.4 outer edge of flange 17.51.0 21.51.0
data sheet pn10262ej02v0ds 10 ps8601,ps8601l,ps8601l1,ps8601l2 2.050.05 2.00.1 4.00.1 1.750.1 24.00.3 10.70.1 12.00.1 1.5 +0.1 ?0 4.5 max. 12.80.1 4.1 0.1 0.30.05 11.50.1 tape direction ps8601l2-e3 ps8601l2-e4 outline and dimensions (tape) outline and dimensions (reel) packing: 1 000 pcs/reel 3302.0 1001.0 2.00.5 13.00.2 r 1.0 21.00.8 2.00.5 23.9 to 27.4 outer edge of flange 25.51.0 29.51.0
data sheet pn10262ej02v0ds 11 ps8601,ps8601l,ps8601l1,ps8601l2 notes on handling 1. recommended soldering conditions (1) infrared reflow soldering peak reflow temperature 260 c or below (package surface temperature) time of peak reflow temperature 10 seconds or less time of temperature higher than 220 c 60 seconds or less time to preheat temperature from 120 to 180 c 120 30 s number of reflows three flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 12030 s (preheating) 220?c 180?c package surface temperature t (?c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260?c max. 120?c (2) wave soldering temperature 260 c or below (molten solder temperature) time 10 seconds or less preheating conditions 120 c or below (package surface temperature) number of times one (allowed to be dipped in solder including plastic mold portion.) flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) soldering by soldering iron peak temperature (l ead part temperature) 350 c or below time (each pins) 3 seconds or less flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (a) soldering of leads should be made at the poi nt 1.5 to 2.0 mm from the root of the lead. (b) please be sure that the temperatur e of the package woul d not be heated over 100 c.
data sheet pn10262ej02v0ds 12 ps8601,ps8601l,ps8601l1,ps8601l2 (4) cautions fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. cautions regarding noise be aware that when voltage is applied suddenly bet ween the photocoupler?s i nput and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
data sheet pn10262ej02v0ds 13 ps8601,ps8601l,ps8601l1,ps8601l2 specification of vde marks license document (vde0884) parameter symbol speck unit application classification (din vde 0109) for rated line voltages 300 v r.m.s. for rated line voltages 600 v r.m.s. iv iii climatic test class (din iec 68 teil 1/09.80) 55/100/21 dielectric strength maximum operating isolation voltage test voltage (partial discharge test, pr ocedure a for type test and random test) u pr = 1.2 u iorm , p d < 5 pc u iorm u pr 890 1 068 v peak v peak test voltage (partial discharge tes t, procedure b for all devices test) u pr = 1.6 u iorm , p d < 5 pc u pr 1 424 v peak highest permissible overvoltage u tr 8 000 v peak degree of pollution (din vde 0109) 2 clearance distance > 7.0 mm creepage distance > 7.0 mm comparative tracking index (din iec 112/vde 0303 part 1) cti 175 material group (din vde 0109) iii a storage temperature range t stg ?55 to +150 c operating temperature range t a ?55 to +100 c isolation resistance, minimum value v io = 500 v dc at t a = 25 c v io = 500 v dc at t a max. at least 100 c ris min. ris min. 10 12 10 11 ? ? safety maximum ratings (maximum permi ssible in case of fault, see thermal derating curve) package temperature current (input current i f , psi = 0) power (output or total power dissipation) isolation resistance v io = 500 v dc at t a = 175 c (tsi) tsi isi psi ris min. 175 400 700 10 9 c ma mw ?
data sheet pn10262ej02v0ds 14 ps8601,ps8601l,ps8601l1,ps8601l2 the information in this document is current as of may, 2006. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. "standard": "special": "specific":
0604 nec compound semiconductor devices hong kong limited e-mail: contact@ncsd-hk.necel.com hong kong head office tel: +852-3107-7303 fax: +852-3107-7309 taipei branch office tel: +886-2-8712-0478 fax: +886-2-2545-3859 korea branch office tel: +82-2-558-2120 fax: +82-2-558-5209 nec electronics (europe) gmbh http://www.eu.necel.com/ tel: +49-211-6503-0 fax: +49-211-6503-1327 california eastern laboratories, inc. http://www.cel.com/ tel: +1-408-988-3500 fax: +1-408-988-0279 compound semiconductor devices division nec electronics corporation url: http://www.ncsd.necel.com/ for further information, please contact ps8601,ps8601l,ps8601l1,ps8601l2 caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. follow related laws and ordinanc es when disposing of the produc t. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industria l waste and household garbage, and ensure that the product is controlled (as industria l waste subject to special c ontrol) up until final disposal. do not burn, destroy, cut, crush, or chemically di ssolve the product. do not lick the product or in any way allow it to enter the mouth.

▲Up To Search▲

Price & Availability of PS8601L-V-E3-A

	To Download PS8601L-V-E3-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .