View ADW22279ZC_7242523.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

single-axis, high- g , i mems ? accelerometers adxl78 rev. b information furnished by analog devices is believed to be accurate and reliable. however, no responsibility is assumed by analog devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. one technology way, p.o. box 9106, norwood, ma 02062-9106, u.s.a. tel: 781.329.4700 www.analog.com fax: 781.461.3113 ?2010 analog devices, inc. all rights reserved. features complete acceleration measurement system on a single monolithic ic available in 35 g , 50 g , or 70 g output full-scale ranges full differential sensor and circuitry for high resistance to emi/rfi environmentally robust packaging complete mechanical and electrical self-test on digital command output ratiometric to supply sensitive axes in the plane of the chip high linearity (0.2% of full scale) frequency response down to dc low noise low power consumption (1.3 ma) tight sensitivity tolerance and 0 g offset capability largest available prefilter clipping headroom 400 hz, 2-pole bessel filter single-supply operation compatible with sn/pb and pb-free solder processes qualified for automotive applications applications vibration monitoring and control vehicle collision sensing shock detection general description the adxl78 is a low power, complete single-axis accelerometer with signal conditioned voltage outputs that are on a single monolithic ic. this product measures acceleration with a full- scale range of 35 g , 50 g , or 70 g (minimum). it can also measure both dynamic acceleration (vibration) and static acceleration (gravity). the adxl78 is the fourth-generation surface micromachined i mems? accelerometer from adi with enhanced performance and lower cost. designed for use in front and side impact airbag applications, this product also provides a complete cost- effective solution useful for a wide variety of other applications. the adxl78 is temperature stable and accurate over the automotive temperature range, with a self-test feature that fully exercises all the mechanical and electrical elements of the sensor with a digital signal applied to a single pin. the adxl78 is available in a 5 mm 5 mm 2 mm, 8-terminal ceramic lcc package. functional block diagram 05368-001 adxl78 v dd v s v dd2 differential sensor exc demod amp x out 400hz bessel filter timing generator self-test figure 1.
adxl78 rev. b | page 2 of 12 table of contents features .............................................................................................. 1 ? applications ....................................................................................... 1 ? general description ......................................................................... 1 ? functional block diagram .............................................................. 1 ? specifications ..................................................................................... 3 ? absolute maximum ratings ............................................................ 4 ? esd caution .................................................................................. 4 ? pin configuration and function descriptions ............................. 5 ? theory of operation ........................................................................ 7 ? applications ........................................................................................8 ? power supply decoupling ............................................................8 ? self-test ..........................................................................................8 ? clock frequency supply response .............................................8 ? signal distortion ...........................................................................8 ? outline dimensions ..........................................................................9 ? adxl78 ordering guide .............................................................9 ? automotive products ....................................................................9 ? revision history 7/10rev. a to rev. b updated format ................................................................. universal change to features section ............................................................. 1 updated outline dimensions ......................................................... 9 changes to ordering guide ............................................................ 9 added automotive products section ............................................ 9 5/05rev. 0 to rev. a
adxl78 rev. b | page 3 of 12 specifications 1 at t a = ?40c to +105c, 5.0 v dc 5%, acceleration = 0 g, unless otherwise noted. table 1. model no. ad22279 model no. ad22280 model no. ad22281 parameter conditions min typ max min typ max min typ max unit sensor output full-scale range i out 100 a 37 55 70 g nonlinearity 0.2 2 0.2 2 0.2 2 % package alignment error 1 1 1 degree cross-axis sensitivity ?5 +5 ?5 +5 ?5 +5 % resonant frequency 24 24 24 khz sensitivity, ratiometric (over temperature) v dd = 5 v, 100 hz 52.25 55 57.75 36.1 38 39.9 25.65 27 28.35 mv/ g offset zero- g output voltage (over temperature) 2 v out ? v dd /2, v dd = 5 v ?200 +200 ?150 +150 ?150 +150 mv noise noise density 10 hz ? 400 hz, 5 v 1.1 3 1.4 3 1.8 3.5 m g /hz clock noise 5 5 5 mv p-p frequency response 2-pole bessel ?3 db frequency 360 400 440 360 400 440 360 400 440 hz ?3 db frequency drift 25c to t min or t max 2 2 2 hz self-test output change (cube vs. v dd ) 3 v dd = 5 v 440 550 660 304 380 456 216 270 324 mv logic input high v dd = 5 v 3.5 3.5 3.5 v logic input low v dd = 5 v 1 1 1 v input resistance pull-down resistor to gnd 30 50 30 50 30 50 k output amplifier output voltage swing i out = 400 a 0.25 v dd ? 0.25 0.25 v dd ? 0.25 0.25 v dd ? 0.25 v capacitive load drive 1000 1000 1000 pf prefilter headroom 280 400 560 g cfsr @ 400 khz 5 4 3 v/v power supply (v dd ) 4.75 5.25 4.75 5.25 4.75 5.25 v functional range 3.5 6 3.5 6 3.5 6 v quiescent supply current v dd = 5 v 1.3 2 1.3 2 1.3 2 ma temperature range ?40 +105 ?40 +105 ?40 +105 c 1 all minimum and maximum specifications are guaranteed. typical specifications are not guaranteed. 2 zero g output is ratiometric. 3 self-test output at v dd = (self-test output at 5 v) (v dd /5 v) 3 .
adxl78 rev. b | page 4 of 12 absolute maximum ratings table 2. parameter rating acceleration (any axis, unpowered) 4000 g acceleration (any axis, powered) 4000 g v s ?0.3 v to +7.0 v all other pins (com ? 0.3 v) to (v s + 0.3 v) output short-circuit duration (any pin to common) indefinite operating temperature range ?65c to +150c storage temperature ?65c to +150c stresses above those listed under absolute maximum ratings may cause permanent damage to the device. this is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. esd caution
adxl78 rev. b | page 5 of 12 pin configuration and fu nction descriptions 05368-002 nc = no connect nc 1 nc 2 c om 3 v dd 7 x out 6 nc 5 st top view (not to scale) adxl78 4 v dd2 8 figure 2. pin configuration table 3. pin function descriptions pin no. mnemonic description 1 nc do not connect 2 nc do not connect 3 com common 4 st self-test 5 nc do not connect 6 x out x channel output 7 v dd 3.5 v to 6 v 8 v dd2 3.5 v to 6 v
adxl78 rev. b | page 6 of 12 05368-003 t p t l t 25c to peak t s preheat critical zone t l to t p temperature time ramp-down ramp-up t smin t smax t p t l figure 3. recommended soldering profile table 4. recommended soldering profile profile feature sn63/pb37 pb-free average ramp rate (t l to t p ) 3c/s max 3c/s max preheat minimum temperature (t smin ) 100c 150c maximum temperature (t smax ) 150c 200c time (t smin to t smax ), t s 60 s ? 120 s 60 s ? 150 s t smax to t l ramp-up rate 3c/s 3c/s time maintained above liquidous (t l ) liquidous temperature (t l ) 183c 217c time (t l ) 60 s ? 150 s 60 s ? 150 s peak temperature (t p ) 240c + 0c/?5c 260c + 0c/?5c time within 5c of actual peak temperature (t p ) 10 s ? 30 s 20 s ? 40 s ramp-down rate 6c/s max 6c/s max time 25c to peak temperature 6 min max 8 min max 05368-004 earth's surface xxxxx xxxx 22280 pin 8 x out = 2.462v xxxxx xxxx 22280 x out = 2.500v xxxxx xxxx 22280 xxxxx xxxx 22280 x out = 2.500v x out = 2.538v x out = 2.500v figure 4. output resp onse vs. orientation
adxl78 rev. b | page 7 of 12 theory of operation the adxl78 provides a fully differential sensor structure and circuit path, resulting in the industrys highest resistance to emi/rfi effects. this latest generation uses electrical feedback with zero-force feedback for improved accuracy and stability. the sensor resonant frequency is significantly higher than the signal bandwidth set by the on-chip filter, avoiding the signal analysis problems caused by resonant peaks near the signal bandwidth. 05368-005 unit sensing cell movable frame fixed plates unit forcing cell anchor moving plate plate capacitors acceleration anchor figure 5 is a simplified view of one of the differential sensor elements. each sensor includes several differential capacitor unit cells. each cell is composed of fixed plates attached to the substrate and movable plates attached to the frame. displacement of the frame changes the differential capacitance, which is measured by the on-chip circuitry. figure 5. simplified view of sensor under acceleration complementary 400 khz square waves drive the fixed plates. electrical feedback adjusts the amplitudes of the square waves such that the ac signal on the moving plates is 0. the feedback signal is linearly proportional to the applied acceleration. this unique feedback technique ensures that there is no net electrostatic force applied to the sensor. the differential feedback control signal is also applied to the input of the filter, where it is filtered and converted to a single-ended signal.
adxl78 rev. b | page 8 of 12 applications power supply decoupling for most applications, a single 0.1 f capacitor, c dc , adequately decouples the accelerometer from noise on the power supply. however, in some cases, particularly where noise is present at the 400 khz internal clock frequency (or any harmonic thereof), noise on the supply can cause interference on the adxl78s output. if additional decoupling is needed, a 50 (or smaller) resistor or ferrite bead can be inserted in the supply line. additionally, a larger bulk bypass capacitor (in the 1 f to 4.7 f range) can be added in parallel to c dc . self-test the fixed fingers in the forcing cells are normally kept at the same potential as that of the movable frame. when the self-test digital input is activated, the voltage on the fixed fingers on one side of the moving plate in the forcing cells is changed. this creates an attractive electrostatic force, which causes the frame to move toward those fixed fingers. the entire signal channel is active; therefore, the sensor displacement causes a change in v out . the adxl78 self-test function is a comprehensive method of verifying the operation of the accelerometer. because electrostatic force is independent of the polarity of the voltage across capacitor plates, a positive voltage is applied in half of the forcing cells, and its complement in the other half of the forcing cells. activating self-test causes a step function force to be applied to the sensor, while the capacitive coupling term is canceled. the adxl78 has improved self-test functionality, including excellent transient response and high speed switching capabilities. arbitrary force waveforms can be applied to the sensor by modulating the self-test input, such as test signals to measure the system frequency response or even crash signals to verify algorithms within the limits of the self-test swing. the st pin should never be exposed to voltages greater than v s + 0.3 v. if this cannot be guaranteed due to the system design (for instance, if there are multiple supply voltages), then a low v f clamping diode between st and v s is recommended. clock frequency supply response in any clocked system, power supply noise near the clock frequency may have consequences at other frequencies. an internal clock typically controls the sensor excitation and the signal demodulator for micromachined accelerometers. if the power supply contains high frequency spikes, they may be demodulated and interpreted as an acceleration signal. a signal appears as the difference between the noise frequency and the demodulator frequency. if the power supply spikes are 100 hz away from the demodulator clock, there is an output term at 100 hz. if the power supply clock is at exactly the same frequency as the accelerometer clock, the term appears as an offset. if the difference frequency is outside of the signal bandwidth, the filter attenuates it. however, both the power supply clock and the accelerometer clock may vary with time or temperature, which can cause the interference signal to appear in the output filter bandwidth. the adxl78 addresses this issue in two ways. first, the high clock frequency eases the task of choosing a power supply clock frequency such that the difference between it and the accelero- meter clock remains well outside of the filter bandwidth. second, the adxl78 is the only micromachined accelerometer to have a fully differential signal path, including differential sensors. the differential sensors eliminate most of the power supply noise before it reaches the demodulator. good high frequency supply bypassing, such as a ceramic capacitor close to the supply pins, also minimizes the amount of interference. the clock frequency supply response (cfsr) is the ratio of the response at v out to the noise on the power supply near the accelerometer clock frequency. a cfsr of 3 means that the signal at v out is 3 the amplitude of an excitation signal at v dd near the accelerometer internal clock frequency. this is analogous to the power supply response, except that the stimulus and the response are at different frequencies. the adxl78s cfsr is 10 better than a typical single-ended accelerometer system. signal distortion signals from crashes and other events may contain high amplitude, high frequency components. these components contain very little useful information and are reduced by the 2-pole bessel filter at the output of the accelerometer. however, if the signal saturates at any point, the accelerometer output does not look like a filtered version of the acceleration signal. the signal may saturate anywhere before the filter. for example, if the resonant frequency of the sensor is low, the displacement per unit acceleration is high. the sensor may reach the mechanical limit of travel if the applied acceleration is high enough. this can be remedied by locating the accelerometer where it does not see high values of acceleration, and by using a higher resonant frequency sensor such as the adxl78. also, the electronics may saturate in an overload condition between the sensor output and the filter input. ensuring that the internal circuit nodes operate linearly to at least several times the full-scale acceleration value can minimize electrical saturation. the adxl78s circuits are linear to approximately 8 full scale.
adxl78 rev. b | page 9 of 12 outline dimensions bottom view (plating option 1, see detail a foroption2) detail a (option 2) 1 3 5 7 top view 0.075 ref r0.008 (4 plcs) 0.203 0.197 sq 0.193 0.020 0.015 0.010 (r 4 plcs ) 0.180 0.177 sq 0.174 0.087 0.078 0.069 0.008 0.006 0.004 0.077 0.070 0.063 0.054 0.050 0.046 0.030 0.025 0.020 0.028 0.020 dia 0.012 0.019 sq 0.106 0.100 0.094 r0.008 (8 plcs) 05-21-2010-d figure 6. 8-terminal ceramic leadless chip carrier [lcc] (e-8-1) dimensions shown in inches adxl78 ordering guide model 1 , 2 , 3 parts per reel measurement range specified voltage (v) temperature range package description package option ad22279-a-r2 250 35 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 ad22279-a 3,000 35 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 ADW22279ZC 3,000 35 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 ADW22279ZC-rl7 250 35 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 ad22280-r2 250 50 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 ad22280 3,000 50 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 adw22280zc 3,000 50 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 adw22280zc-rl7 250 50 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 ad22281-r2 250 70 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 ad22281 3,000 70 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 adw22281zc 3,000 70 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 adw22281zc-rl7 250 70 g 5 ?40c to +105c 8-terminal ceramic leadless chip carrier e-8-1 1 all models are on tape and reel and are rohs compliant parts. 2 z = rohs compliant part. 3 w = qualified for auto motive applications. automotive products the adw22 2 79, adw22 280, and adw22 281 models are available with cont ro lled manufacturing to support the quality and reliability req uirements of automotive applications. note that these automotive models may have specifications that differ from the commerc ial models; therefore, designers should review the specifications section of this data sheet carefully. only the automotive grade p roducts shown are available for use in automotive applications. contact your local analog devices account representative for specific a utomotive reliability reports for these models.
adxl78 rev. b | page 10 of 12 notes
adxl78 rev. b | page 11 of 12 notes
adxl78 rev. b | page 12 of 12 notes ?2010 analog devices, inc. all rights reserved. trademarks and registered trademarks are the prop erty of their respective owners. d05368-0-7/10(b)

▲Up To Search▲

Price & Availability of ADW22279ZC

	To Download ADW22279ZC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .