tlp360j 2007-10-01 1 toshiba photocoupler gaas ired & photo-triac tlp360j triac drivers programmable controllers ac-output modules solid state relays toshiba tlp360j consists of a photo-triac optically coupled to a gallium arsenide infrared-emitting diode in a four-lead plastic dip package. ? peak off-state voltage: 600 v (min.) ? trigger led current: 10 ma (max.) ? on-state current: 100 ma (max.) ? isolation voltage: 5000 vrms (max.) ? ul recognized: ul1577, file no. e67349 ? option (d4) type tv approved: din en60747-5-2 certificate no. r50033433 maximum operating insulation voltage : 890 vpk maximum permissible overvoltage : 8000 vpk (note) when an en60747-5-2 approved type is needed, please designate ?option (d4).? ? construction mechanical rating 7.62 mm pitch standard type 10.16 mm pitch tlpxxxf type creepage distance clearance insulation thickness 7.0 mm (min) 7.0 mm (min) 0.4 mm (min) 8.0 mm (min) 8.0 mm (min) 0.4 mm (min) ?trigger led current *example: ?(ift7)?; ?tlp360j(ift7)? (note) when specifying the application type name for certification testing, be sure to use the standard product type name, e.g., tlp360j(ift7): tlp360j. jedec toshiba 11-5b2 weight: 0.26 g (typ.) trigger led current (ma) v t = 6 v, ta = 25c classi? fication* min. max. marking of classification (ift7) D 7 t7 standard D 10 t7, blank unit: mm pin configuration (top view) 1: anode 2: cathode 3: terminal1 4: terminal2 1 2 3 4
tlp360j 2007-10-01 2 absolute maximum ratings (ta = 25c) characteristic symbol rating unit forward current i f 50 ma forward current derating (ta 53c) ? i f /c ? 0.7 ma /c peak forward current (100 s pulse, 100 pps) i fp 1 a reverse voltage v r 5 v led junction temperature t j 125 c off-state output terminal voltage v drm 600 v ta = 25c 100 on-state rms current ta = 70c i t(rms) 50 ma on-state current derating (ta 25c) ? i t /c -1.1 ma /c peak on-state current (100 s pulse, 120 pps) i tp 2 a peak nonrepetitive surge current (pw = 10 ms, dc = 10%) i tsm 1.2 a detector junction temperature t j 115 c storage temperature range t stg ? 55~125 c operating temperature range t opr ? 40~100 c lead soldering temperature (10 s) t sol 260 c isolation voltage (ac, 1 min., r.h. 60%) (note 1) bv s 5000 vrms note: using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operat ing temperature/current/voltage, etc. ) are within the absolute maximum ratings. please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (?handling precautions?/?derating concept and methods?) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). note 1: pins 1 and 2 are shorted toget her and pins 3 and 4 are shorted together. recommended operating conditions characteristic symbol min. typ. max. unit supply voltage v ac ? ? 240 v ac forward current i f 15 20 25 ma peak on-state current i tp ? ? 1 a operating temperature t opr ? 25 ? 85 c note: recommended operating conditions are given as a design guideline to obtain expected performance of the device. additionally, each item is an independent guide line respectively. in developing designs using this product, please confirm specified characteristics shown in this document.
tlp360j 2007-10-01 3 electrical characteristics (ta = 25c) characteristic symbol test condition min. typ. max. unit forward voltage v f i f = 10 ma 1.0 1.15 1.3 v reverse current i r v r = 5 v ? ? 10 a led capacitance c t v = 0, f = 1 mhz ? 30 ? pf peak off-state current i drm v drm = 600 v ? 10 1000 na peak on-state voltage v tm i tm = 100 ma ? 1.7 3.0 v holding current i h ? ? 0.6 ? ma critical rate of rise of off-state voltage dv/dt vin = 240 vrms , ta = 85c (note 2) ? 500 ? v/ s detector critical rate of rise of commutating voltage dv/dt(c) vin = 60 vrms , i t = 15 ma (note 2) ? 0.2 ? v/ s coupled electrical characteristics (ta = 25c) characteristic symbol test condition min. typ. max. unit trigger led current i ft v t = 6 v ? ? 10 ma turn-on time t on v d = 6 4 v , r l = 100 i f = rated i ft 1.5 ? 30 100 s isolation characteristics (ta = 25c) characteristic symbol test condition min. typ. max. unit capacitance (input to output) c s v s = 0 , f = 1 mhz ? 0.8 ? pf isolation resistance r s v s = 500 v, r.h. 60% 110 12 10 14 ? ac, 1 minute 5000 ? ? ac, 1 second, in oil ? 10000 ? vrms isolation voltage bv s dc, 1 minute, in oil ? 10000 ? vdc (note 2): dv/dt test circuit dv/dt (c) dv/dt 0v +5 v, vcc 1 2 4 vcc + ? rin 120 vin 3 r l 4k
tlp360j 2007-10-01 4 *: the above graphs show typical characteristics. v f / ta ? i f forward current i f (ma) forward voltage temperature coefficient v f / ta (mv / c) ? 3.2 ? 0.4 0.1 0.3 0.5 1 3 5 10 30 50 ? 0.8 ? 1.2 ? 1.6 ? 2.0 ? 2.4 ? 2.8 ambient temperature ta (a) allowable forward current i f (ma) 60 0 ? 20 50 40 30 20 0 20 40 60 80 120 100 10 i t(rms) ? ta ambient temperature ta (c) r.m.s on-stage current i t(rms) (ma) 120 0 -20 100 80 40 20 0 20 40 60 80 120 100 60 i fp ? v fp pulse forward voltage v pf (v) pulse forward current i fp (ma) 0.6 1000 1 500 300 30 10 3 1.0 1.4 1.8 2.2 2.6 5 50 100 3.0 pulse width 100 s repetitive frequency = 100 hz ta = 25 c i fp ? d r duty cycle ratio d r allowable pulse forward current i fp (ma) 3000 10 ? 3 1000 500 300 100 50 10 10 ? 2 10 ? 1 10 3 3 3 3 30 pulse width 100 s ta = 25 c i f ? v f forward voltage v f (v) forward current i f (ma) 100 0.1 0.6 50 30 3 1 0.3 0.8 1.0 1.2 1.4 1.6 1.8 0.5 5 10 ta = 25 c i f ? ta
tlp360j 2007-10-01 5 *: the above graphs show typical characteristics. normalized i ft ? ta ambient temperature ta (c) trigger led current i ft (arbitrary unit) 3 0.1 ? 40 1.2 1 0.5 0.3 -20 0 20 40 60 100 80 2 v t = 6 v normalized i h ? ta ambient temperature ta (c) holding current i h (arbitrary unit) 3 0.1 -40 1.2 1 0.5 0.3 -20 0 20 40 60 100 80 2 normalized i drm ? ta ambient temperature ta (c) peak off-state current i drm (arbitrary unit) 10 3 10 2 10 1 10 40 100 0 20 60 80 v drm = rated normalized v drm ? ta ambient temperature ta (c) off-stage output terminal voltage v drm (arbitrary unit) 1.4 0.2 -40 1.0 0.8 0.4 -20 0 20 40 60 100 80 1.2 0.4 0.6 normalized i f / i ft ? p w normalized led current i f / i ft 10 1 1.6 2 3 5 1.2 10 30 100 300 500 1000 50 1.4 1.8
tlp360j 2007-10-01 6 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collect ively ?toshiba?), reserve the right to make changes to the in formation in this document, and related hardware, software a nd systems (collectively ?product?) without notice. ? this document and any information herein may not be reproduc ed without prior written permission from toshiba. even with toshiba?s written permission, reproduc tion is permissible only if reproducti on is without alteration/omission. ? though toshiba works continually to improve product?s quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for prov iding adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a ma lfunction or failure of product could cause loss of human life, b odily injury or damage to property, including data loss or corruption. before creating and producing des igns and using, customers mus t also refer to and comply with (a) the latest versions of all re levant toshiba information, including without limitation, this d ocument, the specifications, the data sheets and applic ation notes for product and the precautions and conditions set forth in the ?tosh iba semiconductor reliability handbook? and (b) t he instructions for the application that product will be used with or for. custome rs are solely responsible for all aspects of t heir own product design or applications, incl uding but not limited to (a) determining th e appropriateness of the use of this product in such design or applications; (b) evaluating and det ermining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. toshiba assumes no liability for customers? product design or applications. ? product is intended for use in general el ectronics applications (e.g., computers, personal equipment, office equipment, measur ing equipment, industrial robots and home electroni cs appliances) or for specif ic applications as expre ssly stated in this document . product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality a nd/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or se rious public impact (?unintended use?). unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic s ignaling equipment, equipment used to control combustions or explosions, safety dev ices, elevators and escalato rs, devices related to el ectric power, and equipment used in finance-related fields. do not use product for unintended use unless specifically permitted in thi s document. ? do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. ? the information contained herein is pres ented only as guidance for product use. no re sponsibility is assumed by toshiba for an y infringement of patents or any other intellectual property rights of third parties that may result from the use of product. no license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? a bsent a written signed agreement, except as provid ed in the relevant terms and conditions of sale for product, and to the maximum extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, co nsequential, special, or incidental damages or loss, including without limitation, loss of profit s, loss of opportunities, business interruption and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or noninfringement. ? gaas (gallium arsenide) is used in product. gaas is harmful to humans if consumed or absorbed, whether in the form of dust or vapor. handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose gaas in product. ? do not use or otherwise make available product or related so ftware or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or m anufacturing of nuclear, chemical , or biological weapons or missi le technology products (mass destruction w eapons). product and related software and technology may be controlled under the japanese foreign exchange and foreign trade law and the u.s. expor t administration regulations. ex port and re-export of product or related software or technology are strictly prohibited exc ept in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of pro duct. please use product in compliance with all applicable laws and regula tions that regulate the inclusion or use of controlled subs tances, including without limitation, the eu rohs directive. toshiba assumes no liability for damages or losses occurring as a result o f noncompliance with applicable laws and regulations.
|
