1 3 2 pin 16.5 0.3 10.2 0.2 15.0 0.5 4.0 0.3 13.5 0.5 2.6 0.15 1.4 0.1 0.6 0.1 4.5 0.2 3.1 +0.2 -0.1 |? 3.30.1 ?3.20.2 8.2 0.2 2.6 0.2 0.6 0.1 low cost low leakage low forward voltage drop high current capability case:jedec ito-220ab,molded plastic body polarity: as marked weight: 0.08ounce, 2.24 grams mounting position: any ratings at 25 ambient temperature unless otherwise specified. single phase,half wave,60 hz,resistive or inductive load. for capacitive load,derate by 20%. her 1020c her 1040c her units maximum recurrent peak reverse voltage v rrm v max imum rms v olt age v rms v maximum dc blocking voltage v dc v maximum average forw ard rectified current @t c =75 peak forw ard surge current 8.3ms single half-sine-w ave superimposed on rated load @t j =125 maximum instantaneous forw ard voltage @ 5.0 a v f v maximum reverse current @t a =25 at rated dc blocking voltage @t a =100 maximum reverse recovery time (note1) t rr ns typical junction capacitance (note2) c j pf jc /w operating junction temperature range t j storage temperature range t stg ito-220ab 2. measured at 1.0mhz and applied rev erse v oltage of 4.0v dc. 1.3 1.7 1.0 40 50 100 150 a 10 easily cleaned with alcohol,isopropanol and similar solvents i f(av) 10 voltage range: 100 --- 600 v current: 10 a 70 140 280 420 the plastic material carries u/l recognition 94v-0 a 3.thermal resistance junction to ambient. her 1010c 100 200 400 600 a 100 i r maximum ratings and electrical characteristics i fsm note: 1. measured with i f =0.5a, i r =1a, i rr =0.25a. - 55 ---- + 150 100 200 400 600 - 55 ---- + 150 1060c typical thermal resistance (note3) r 25 dimensions in millimeters her 10 10 c -her 10 60 c high efficiency rectifiers features m echani cal d ata http://www.luguang.cn mail:lge@luguang.cn
0.1 1 10 100 t j =25 pulse width=300 s 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 100\200v 600v 400v 124 108 20 40 60 100 100 0 25 50 75 t j =125 ?? 8.3ms single half sine-wave .2 tj=25 f=1mhz 10 .1 20 40 .4 1.0 2 400 100 200 600 1000 4 10 20 40 100 0 2 4 25 50 75 100 125 150 6 8 10 amperes amperes amperes fig.2 -- typical forward characteristic fig.3 -- forward derating curve z fig.4 -- typical junction capacitance fig.5 -- peak forward surge current case temperature, peak forward surge current number of cycles at 60hz reverse voltage,volts fig.1 -- test circuit diagram and reverse recovery time characteristic average forward current set time base for 20/45 ns/cm junction capacitance,pf notes:1.rise time = 7ns max.input impedance = 1m .22pf. jjjjj 2.rise time =10ns max.source impedance=50 . instantaneous forward voltage, volts instantaneous forward current t rr -1.0a -0.25a 0 +0.5a 1cm pulse generator (note2) d.u.t. 50 n 1. 10 n1. oscilloscope (note 1) (+) 50vdc (approx) (-) 1 nonin- ductive 5 her 10 10 c -her 10 60 c high efficiency rectifiers ratings and charactieristic curves http://www.luguang.cn mail:lge@luguang.cn
|
