c39 sd memory card connectors dm1 series features 1. withstands higher force of card insertion metal cover extends over the back of the connector allowing it to withstand force of up to 400 n (static load) when dropped or accidentally hit. 2. no damage to the card when accidentally pulled-out the connectors will release the card when a moderate pull-out force of about 4 n is applied. there will be no damage to the lock components and all connector functions will not be affected. 3. accidental card fall-out prevention built-in lock feature holds the card securely in place. 4. reliable card insertion and withdrawal built-in push-in / push-out ejection mechanism assures simple and reliable card insertion and withdrawal. 5. designed to accept secure digital i/o card (built-in ground contact) the connector allows use of various expansion modules, including the bluetooth communication modules. applications notebook pc's, digital cameras, pda's, audio/video equipment and other devices utilizing sd i/o cards. card standard type withstands higher force of card insertion. metal cover extends over the back of the connector. card reverse type metal cover extends over the back of the connector. no damage to the card when accidentally pulled-out. accidental card fall-out prevention the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
c40 dm 1 aa - sf - pej 500 v dc 1000 m ? min. (initial value) 1. insulation resistance rating current rating 0.5a dc voltage rating 125 v ac operating temperature range:-25 ? to +85 ? (note 1) storage temperature range:-40 ? to +85 ? (note 2) operating humidity range : relative humidity 95% max. (no condensation) product specifications item specification conditions 500 v ac / one minute no flashover or insulation breakdown 2. withstanding voltage 100ma dc 100 m ? max. (initial value) 3. contact resistance frequency: 10 to 55 hz, single amplitude of 0.75 mm, 2 hours / 3 axis no electrical discontinuity of 100 ns or more 4. vibration 96 hours at temperature of 40 ? 2 ? and humidity of 90% to 95% contact resistance: 40 m ? max. from initial value insulation resistance: 100 m ? min. 5. humidity temperature: -55 ? / +5 ? to +35 ? / +85 ? / +5 ? to +35 ? duration: 30 / 5 / 30 / 5 (minutes) 5 cycles contact resistance: 40 m ? max. from initial value insulation resistance: 100 m ? min. 6. temperature cycle 10000 cycles at 400 to 600 cycles per hour contact resistance: 40m ? max. from initial value 7. durability (mating/un-mating) reflow: at the recommended temperature profile manual soldering: 300? for 3 seconds no deformation of components affecting performance. 8. resistance to soldering heat note1: includes temperature rise caused by current flow. note2: the term "storage" refers to products stored for long period of time prior to mounting and use. operating temperature range and humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. materials ordering information 1 2 3 4 component material finish remarks insulator heat resistant thermoplastic compound color: black ul94v-0 contacts phosphor bronze contact area: gold plating termination area: tinned copper plating - - - - - - - - - - - - - - - - - - - - cover stainless steel termination area: tinned copper plating - - - - - - - - - - - - - - - - - - - - others stainless steel piano wire - - - - - - - - - - - - - - - - - - - - nickel plating - - - - - - - - - - - - - - - - - - - - series name : dm1 connector type : aa : standard receptacle : b : reverse receptacle terminal type sf : right angle surface mount dsf : reverse right angle surface mount eject mechanism codes pej : card push insert/push withdraw 1 2 3 4 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
c41 2 2 1.60.05 1.20.05 25.40.05 150.05 4.1250.05 p=2.50.05 9-1.10.05 1.350.05 1.70.05 22.40.05 20.05 1.20.05 23.20.05 4.550.05 2 +0.1 0 4-2 +0.1 0 2-?1.3 +0.1 0 2 +0.1 0 2 +0.1 0 3-1 +0.1 0 20.750.05 18.150.05 9.20.05 card detection switch write protection switch 9.2 18.15 3-0.5 20.75 no.8 no.7 no.6 no.5 no.4 no.3 no.2 no.1 no.9 1 c l 1 28 13.2 9.75 8.05 t=0.2,w=0.6 15 5.625 p2.5 1 2.9 22.4 2-?1.2 0.55 30.5 2.5 23.2 4.55 4-1.5 1 c l 1 1 c l 1 c l 24.15 (card slot dimension) weight:2.2g when card is ejected when card is ejected when card is inserted when card is inserted write protect write enable card detection switch write protection switch open close open open close 1 c l indicates the center line of card slot. 5 1 sd card card pushed-in for insertion card fully inserted card ejected (card ejected dimension) sd card sd card 5 6 11 standard type part number dm1aa-sf-pej(21) 609-0004-8-21 hrs no. b pcb mounting pattern b card insertion/withdrawal dimensions the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
c42 a(5:1) b(5:1) c(5:1) (r0.6) (r0.4) (r0.6) (r0.4) (r0.6) (r0.4) 1.7 +0.1 0 (land) 1.2 +0.1 0 (land) 1.3 +0.1 0 (through hole) 0.8 +0.1 0 (through hole) 1.9 +0.1 -0.1 (land) 1.2 +0.1 0 (land) 1.5 +0.1 0 (through hole) 0.8 +0.1 0 (through hole) 2.4 +0.1 -0.1 (land) 1.2 +0.1 0 (land) 2 +0.1 0 (through hole) 0.8 +0.1 0 (through hole) card detect common for cd & wp wp a a c b 5.62 9.470.05 12.80.05 11.20.05 9.750.05 0.80.05 1.40.05 8.050.05 12.50.05 5.6250.05 p=2.50.05 1.250.05 8-1.10.05 12.570.05 11.230.05 14.130.05 11.930.05 2.030.05 1.40.05 23.480.05 26.980.05 28.50.05 14.250.05 0.80.05 11-2.50.05 1.050.05 28.250.05 3 3 center of card dimension reverse type b pcb mounting pattern 2 (0.25) (1.77) no.8 no.7 no.6 no.5 no.4 no.3 no.2 no.1 no.9 28 (14.35) 18.68 2 16.85 6-0.65 1.5 1.85 1.05 0.35 2 2 2 2 2 27.2 2 27.45 29 2 8.63 1 c l 1 c l 2 6.95 2 7.65 5.62 2.9 1 c l 1 c l 29.9 sd card (5):card pushed for insertion (6):card fully inserted 10: card ejected(card ejected dimension) weight:2.1g 1 2 when card is ejected open open close write protect write enable card detection switch when card is ejected when card is ejected when card is ejected write protection switch open close indicates the dimension of dip terminals. c l indicates the center line of the card slot. part number dm1b-dsf-pej 609-0003-5 hrs no. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
c43 20.15 40.1 1.750.1 ?1.5 +0.1 0 360.1 3.40.3 4.350.3 440.3 40.40.1 20.20.1 unreeling direction b packaging specifications embossed carrier tape dimensions (standard type) 450 pieces per reel 20.15 40.1 360.1 4.60.3 3.40.3 1.750.1 440.3 40.40.1 20.20.1 ?1.5 +0.1 0 unreeling direction embossed carrier tape dimensions(reverse type) 450 pieces per reel end section blank section(160mm min.) mounting section(450) lead section (400mm min.) blank section (100mm min.) embossed carrier tape top cover tape (?380) (?150) d unreeling direction 44.4 +2 0 reel dimensions the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
c44 100? 0? 150? 200? 300? 50s 0s 100s 150s 200s max240? 220? preheating soldering preheating: 150 ? 30 to 90 sec. ir reflow conditions soldering : 235 5 ? 10 sec. max. soldering : 220 ? 10 to 20 sec. recommended temperature profile recommended conditions reflow system : ir reflow solder : paste type 63 sn/37 pb(flux content 9 wt%) test board : glass epoxy 60mm x 100mm x 1.6 mm thick metal mask thickness: 0.15 mm recommended temperature profile. the temperature may be slightly changed according to the solder paste type and thickness. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
|
