611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com features: ? superior flatness vs. frequency ? wide frequency range ? improved return loss ? higher power handling applications: ? transmitter monitoring ? missile guidance systems ? input to low-noise amplifiers ? broadband or narrowband ecm receivers ? power and signal monitors ? doppler radar and beacon receivers ? matched units available for mult i-channel receivers, amplitude comparator systems and discriminators ? laboratory test equipment flatness low frequency vs internal level standard optional range part (1) frequency tss attenuation sensitivity case case (ghz) number (+/-db) (dbm) (db) (mv/mw)(2) styles styles 2 - 4 acsp2579nz 0.2 -45 6 500 c8 c3,c15 0.01 - 8 acsp2539nz 0.5 -45 6 500 c3 c8,c15,c32,c74 7.9 - 8.4 acsp2518nz 0.1 -45 6 500 c3 c8,c15,c32 7.9 - 8.4 acsp2519pz 0.1 -48 3 1000 c3 c8,c15,c32 0.01 - 12.4 acsp2663nz 0.5/octave -45 6 500 c8 c15,c32 0.01 - 18 acsp2544nz 0.5/octave -45 6 500 c3 c15,c32 0.01 - 18 acsp2551nz 0.5/octave -44 7 400 c3 c15,c32 5 - 18 acsp2521pz 0.5/octave -44 6 500 c3 c15,c32 0.01 - 20 acsp2643nz 0.5/octave -46 3 1000 c3 c15,c32 0.01 - 20 acsp2644nz 1.0 -44 7 500 c15 c3,c32 notes: 1) standard output polarity is negative unless otherwise noted. if positive output is required, s ubstitute ?p? for ?n? in part number. 2) measured into an open circuit load (>10k ohm). detectors with internal attenuators are o ften requested. they are typically used in circuits where an improved rf matc h is needed or where the power levels applied are higher than is typical for low level detectors. frequently, they are used in laboratory applications with associated instruments such as broadband power leveling or monitoring. these det ectors are all zero bias, making them convenient to use. padded zero bias schottky detectors
611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com sma male 0.250-36uns-2b (output) sma male 0.250-36uns-2b (input) ?.380.02 1.550.02 environmental specifications: screening : mil-e-5400, mil-std-202, mil-e-16400 standard screening : storage temp: -65c to +150c internal visual per mil-std-883, method 2017 humidity: mil-std-202f, m103, cond b temperature cycle: -65c to +100c, 10 cycles shock: mil-std-202f, m213, cond b optional high-rel screening (ref mil-prf-38534) : altitude: mil-std-202f, m105, cond b internal visual per mil-std-883, method 2017 vibration : mil-std-202f, m204, cond b stabilization bake per mil-std-883, method 1008 thermal shock: mil-std-202f, m107, cond a temperature cycle per mil-std-883, method 1010 temperature cycle: mil-std-202f, m105c, cond d constant acceleration per mil-std-883, method 2001 maximum input power: +23dbm burn-in per mil-std-883, method 1015 leak test per mil-std-883, method 1014 external visual per mil-std-883, method 2009 case style c3 case style c8 case style c15 case style c32 case style c74 part number ordering information: example: acsp2663nzc3 acsp2663: padded zero bias schottky detector, 0.01 ? 12.4ghz n: negative output polarity z: zero bias c3: package type sp-0205 bnc female (output) sma male (input) 2.00 0.43 0.42 ?0.500 2.800.020 bnc female (output) ?0.625 type-n male (input) ?0.312 sma female (output) sma male (input) 1.160.020 ?0.312 1.320.020 sma male (input) sma female (output)
|
