View UPG2022T5G-E1-A_7390455.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

description the pg2022t5g is a gaas fet mmic spdt (single pole double throw) high power switch. the device can operate from 4.8 to 5.85 ghz, havi ng the low insertion loss. it housed in a 6-pin plastic son package. features ? operating frequency : f = 4.8 to 5.85 ghz low insertion loss : l ins = 0.8 db typ. @ f = 4.9 ghz : l ins = 0.7 db typ. @ f = 5.2 ghz : l ins = 0.8 db typ. @ f = 5.8 ghz handling power : p in (0.1 db) = +31 dbm typ. @ f = 4.8 to 5.85 ghz control voltage : v cont = +2.8 v/0 v high isolation : isl1 (between output1 and output2) = 22 db typ. @ f = 5.2 ghz : isl2 (between input and output) = 23 db typ. @ f = 5.2 ghz input/output return loss : rl in /rl out = 10 db min. @ f = 4.8 to 5.85 ghz switch control speed : 20 ns @ t rise /t fall (10/90% rf) 6-pin plastic son package (2.0 3.0 0.75 mm) application 5 ghz band wireless lan ordering information part number order number package marking supplying form pg2022t5g-e1 pg2022t5g-e1-a 6-pi n plastic son (pb-free) g4h ? embossed tape 8 mm wide ? pin 1 indicates pull-out direction of tape ? qty 3 kpcs/reel remark to order evaluation samples, contact your nearby sales office. part number for sample order: pg2022t5g the mark ? shows major revised points. data sheet caution observe precautions when handling because these devices are sensitive to electrostatic discharge. the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all devices/types available in every country. please check with local nec compound semiconductor devices representative for availability and additional information. gaas mmic spdt high power switch from 4.8 to 5.85 ghz gaas integrated circuit pg2022t5g document no. pg10472ej02v0ds (2nd edition) date published may 2005 cp(k) printed in japan ? nec compound semiconductor devices, ltd. 2003, 2005
pin connections pin no. pin name 1 output1 2 gnd 3 output2 4 v cont2 5 input 3 2 1 4 5 6 (top view) g4h 4 5 6 3 2 1 (bottom view) 6 v cont1 absolute maximum ratings (t a = +25 c, unless otherwise specified) parameter symbol ratings unit switch control voltage v cont1, 2 ? 6.0 to +6.0 note v input power p in +36 dbm operating ambient temperature t a ? 45 to +85 c storage temperature t stg ? 55 to +150 c note | v cont1 ? v cont2 | 6.0 v recommended operating range (t a = +25 c, unless otherwise specified) parameter symbol min. typ. max. unit switch control voltage (h) v cont (h) 2.7 2.8 3.3 v switch control voltage (l) v cont (l) ? 0.2 0 0.2 v operating frequency f 4.8 ? 5.85 ghz operating ambient temperature t a ? 40 +25 +85 c data sheet pg10472ej02v0ds 2 pg2022t5g
electrical characteristics (t a = +25 c, v cont = 2.8 v/0 v, z o = 50 ? , dc block capacitor = 27 pf, each port, unless otherwise specified) parameter symbol test conditions min. typ. max. unit f = 4.9 ghz ? 0.8 1.1 db f = 5.2 ghz ? 0.7 1.1 db insertion loss l ins f = 5.8 ghz ? 0.8 1.1 db f = 4.9 ghz 13 18 ? db f = 5.2 ghz 15 22 ? db isolation 1 (between output1 and output2) isl1 f = 5.8 ghz 15 20 ? db f = 4.9 ghz 10 22 ? db f = 5.2 ghz 10 29 ? db input return loss rl in f = 5.8 ghz 10 19 ? db f = 4.9 ghz 10 21 ? db f = 5.2 ghz 10 29 ? db output return loss rl out f = 5.8 ghz 10 20 ? db 0.1 db gain compression input power p in (0.1 db) f = 4.8 to 5.85 ghz 30 31 ? dbm switch control speed t sw t rise /t fall (10/90% rf) ? 20 ? ns switch control current i cont ? 0.5 1 a standard characteristics for reference (t a = +25 c, v cont = 2.8 v/0 v, z o = 50 ? , dc block capacitor = 27 pf, each port, unless otherwise specified) parameter symbol test conditions min. typ. max. unit f = 4.9 ghz ? 18 ? db f = 5.2 ghz ? 23 ? db isolation 2 (between input and output) isl2 f = 5.8 ghz ? 21 ? db data sheet pg10472ej02v0ds 3 pg2022t5g
evaluation circuit v cont1 v cont2 input 1 000 pf 1 000 pf 27 pf 654 123 output1 output2 27 pf 27 pf the application circuits and their parameters are for reference only and are not intended for use in actual design-ins. truth table of switching by condition of control voltage v cont1 v cont (h) v cont (l) v cont (h) input output1 output2 note input output1 output2 v cont2 v cont (l) input output1 output2 input output1 output2 note note in case of v cont1 = v cont2 = high or v cont1 = v cont2 = low, (that is same cont rol voltage for both pins), input signal of input (pin 5) is output fr om output1 (pin 1) and output2 (pin 3). data sheet pg10472ej02v0ds 4 pg2022t5g
illustration of the test circuit assembled on evaluation board upg2022t5g spdt sw eb1 6pin son out2 c1 v c 2v c 1 in c1 c1 c2 c2 out1 using the nec evaluation board symbol form rating part number manufacturer c1 chip capacitor 27 pf grm36ch270k50 murata c2 chip capacitor 1 000 pf grm36b102k50 murata ? pc terminal ? a2-2pa-2.54dsa hirose ? rf connector ? 142-0721-821 johnson ? pwb ? ro4003 (t = 0.51 mm) rogers data sheet pg10472ej02v0ds 5 pg2022t5g
typical characteristics (t a = +25 c, v cont = 2.8 v/0 v, z o = 50 ? , dc block capacitor = 27 pf using test fixture, unl ess otherwise specified) 0 ?0.5 ?1 ?1.5 ?2 ?2.5 ?3 0 ?0.5 ?1 ?1.5 ?2 ?2.5 ?3 4 4.2 4.4 4.6 4.8 5 5.2 5.4 5.6 5.8 6 4 4.2 4.4 4.6 4.8 5 5.2 5.4 5.6 5.8 6 4 4.2 4.4 4.6 4.8 5 5.2 5.4 5.6 5.8 6 4 4.2 4.4 4.6 4.8 5 5.2 5.4 5.6 5.8 6 4 4.2 4.4 4.6 4.8 5 5.2 5.4 5.6 5.8 6 4 4.2 4.4 4.6 4.8 5 5.2 5.4 5.6 5.8 6 0 ?10 ?20 ?30 ?40 ?50 0 ?10 ?20 ?30 ?40 ?50 0 ?10 ?20 ?30 ?40 ?50 0 ?10 ?20 ?30 ?40 ?50 insertion loss l ins (db) frequency f (ghz) input-output1 insertion loss vs. frequency (when input-output1 is on) input-output2 insertion loss vs. frequency (when input-output2 is on) output1-output2 isolation vs. frequency (when input-output1 is on) output1-output2 isolation vs. frequency (when input-output2 is on) input-output2 isolation vs. frequency (when input-output1 is on) input-output1 isolation vs. frequency (when input-output2 is on) isolation isl (db) frequency f (ghz) isolation isl (db) frequency f (ghz) isolation isl (db) frequency f (ghz) isolation isl (db) frequency f (ghz) insertion loss l ins (db) frequency f (ghz) remark the graphs indicate nominal characteristics. data sheet pg10472ej02v0ds 6 pg2022t5g
return loss rl (db) frequency f (ghz) output power p out (dbm) input power p in (dbm) return loss rl (db) frequency f (ghz) output power p out (dbm) input power p in (dbm) p in (0.1db) = +32.5 dbm p in (0.1db) = +34.0 dbm 0 ?10 ?20 ?30 ?40 ?50 4 4.2 4.4 4.6 4.8 5 5.2 5.4 5.6 5.8 6 4 4.2 4.4 4.6 4.8 5 5.2 5.4 5.6 5.8 6 4 4.2 4.4 4.6 4.8 5 5.2 5.4 5.6 5.8 6 4 4.2 4.4 4.6 4.8 5 5.2 5.4 5.6 5.8 6 0 ?10 ?20 ?30 ?40 ?50 20 25 30 35 38 20 25 30 35 38 0 ?10 ?20 ?30 ?40 ?50 0 ?10 ?20 ?30 ?40 ?50 35 30 25 20 18 35 30 25 20 18 return loss rl (db) frequency f (ghz) input return loss vs. frequency (when input-output1 is on) input return loss vs. frequency (when input-output2 is on) output1 return loss vs. frequency (when input-output1 is on) output2 return loss vs. frequency (when input-output2 is on) output power vs. input power (f = 4.9 ghz) output power vs. input power (f = 5.2 ghz) return loss rl (db) frequency f (ghz) remark the graphs indicate nominal characteristics. data sheet pg10472ej02v0ds 7 pg2022t5g
35 30 25 20 18 output power p out (dbm) input power p in (dbm) output power vs. input power (f = 5.8 ghz) 20 25 30 35 38 p in (0.1db) = +36.0 dbm remark the graph indicates nominal characteristics. data sheet pg10472ej02v0ds 8 pg2022t5g
package dimensions 6-pin plastic son (unit: mm) 2.0 3.0 0.750.1 (bottom view) 0.95 0.95 0.35 +0.07 ?0.05 0.70.1 0.19 0.70.1 0.290.1 0.290.1 0.25 +0.07 ?0.05 data sheet pg10472ej02v0ds 9 pg2022t5g
recommended soldering conditions this product should be soldered and mounted under the following recommended conditions. for soldering methods and conditions other than those recomm ended below, contact your nearby sales office. soldering method soldering conditions condition symbol infrared reflow peak temperature (package surface temperature) : 260 c or below time at peak temperature : 10 seconds or less time at temperature of 220 c or higher : 60 seconds or less preheating time at 120 to 180 c : 120 30 seconds maximum number of reflow processes : 3 times maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below ir260 wave soldering peak temperature (molten solder temperature) : 260 c or below time at peak temperature : 10 seconds or less preheating temperature (package surface temperature) : 120 c or below maximum number of flow processes : 1 time maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below ws260 partial heating peak temperatur e (terminal temperature) : 350 c or below soldering time (per side of device) : 3 seconds or less maximum chlorine content of rosin fl ux (% mass) : 0.2%(wt.) or below hs350 caution do not use different soldering met hods together (except for partial heating). data sheet pg10472ej02v0ds 10 pg2022t5g
when the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the au thority having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license . m8e 00. 4 - 0110 the information in this document is current as of may, 2005. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec's data sheets or data books, etc., for the most up-to-date specifications of nec semiconductor products. not all products and/or types are available in every country. please check with an nec sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without prior written consent of nec. nec assumes no responsibility for any errors that may appear in this document. nec does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec semiconductor products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. nec assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec endeavours to enhance the quality, reliability and safety of nec semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. nec semiconductor products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. the recommended applications of a semiconductor product depend on its quality grade, as indicated below. customers must check the quality grade of each semiconductor product be fore using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec semiconductor products is "standard" unless otherwise expressly specified in nec's data sheets or data books, etc. if customers wish to use nec semiconductor products in applications not intended by nec, they must contact an nec sales representative in advance to determine nec's willingness to support a given application. (note) (1) "nec" as used in this statement means nec corporation, nec compound semiconductor devices, ltd. and also includes its majority-owned subsidiaries. (2) "nec semiconductor products" means any semiconductor product developed or manufactured by or for nec (as defined above). ? ? ? ? ? ? data sheet pg10472ej02v0ds 11 pg2022t5g
caution gaas products this product uses gallium arsenide (gaas). gaas vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. ? follow related laws and ordinanc es when disposing of the produc t. if there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. commission a disposal company able to (wit h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. exclude the product from general industria l waste and household garbage, and ensure that the product is controlled (as industria l waste subject to special c ontrol) up until final disposal. do not burn, destroy, cut, crush, or chemically di ssolve the product. do not lick the product or in any way allow it to enter the mouth. nec compound semiconductor devices hong kong limited e-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) hong kong head office taipei branch office korea branch office tel: +852-3107-7303 tel: +886-2-8712-0478 tel: +82-2-558-2120 fax: +852-3107-7309 fax: +886-2-2545-3859 fax: +82-2-558-5209 nec electronics (europe) gmbh http://www.ee.nec.de/ tel: +49-211-6503-0 fax: +49-211-6503-1327 california eastern laboratories, inc. http://www.cel.com/ tel: +1-408-988-3500 fax: +1-408-988-0279 0504 nec compound semiconductor devices, ltd. http://www.ncsd.necel.com/ e-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) sales division tel: +81-44-435-1573 fax: +81-44-435-1579 for further information, please contact pg2022t5g

▲Up To Search▲

Price & Availability of UPG2022T5G-E1-A

	To Download UPG2022T5G-E1-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .