do not scale from this print .250 - .050 + .150 (typ) (see note 4) .120 ref "xx.xx" .225 ref (no pos x .050) + .165 -d: double end fig. 1 fmtp-10-d-3.85-01-x c2 score line c5 ffmd-xx-01-x ffsd-xx-01-n no of positions -02- thru -25 lead style end assembly assembly length only available in these lengths 03.85" (use cbtp-68-30-7/38-025-2) 08.77" (use cbtp-68-30-7/38-025-1) 18.00" (use cbtp-68-30-7/38-025-4) option -d: double end (see figs 1&3) -t: transfer end (see figs 2&4) -r: reversed connector (see fig. 3) fmtp-xx-x-xx.xx-01-x-x-xx standard polarization notch -n: notch (only available on -t) plating options ref (no pos x .050) + .165 -t: transfer end fig. 2 fmtp-10-t-3.85-01-x-n (same as fig. 1 except as shown) -r fig. 3 reversed connector fmtp-10-d-x.xx-01-x-r (same as fig. 1 except as shown) notch denotes first position red wire to side of 1st pos indicator scale 2:1 reversed connector .200 .010 'a' c3 'b' .010 max cable overhang detail 'a' scale 2 : 1 .200 - .003 + .006 detail 'b' scale 2 : 1 c4 c1 c1 leave blank for standard (use t-1s57-01-t and c-67-l) -f: flash selective gold (use t-1s57-01-f and c-67-f) -s: selective gold (use t-1s57-01-s and c-67-s) sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: .050 x .050 c/l twisted pair male idc assembly by: fmtp-xx-x-xx.xx-01-x-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing lenny k 3/16/07 2 1 sheet scale: 1:1 insulator: celanex 3314, color: black contact or terminal: phos bronze cable: twisted pair f:\dwg\misc\mktg\fmtp-xx-x-xx.xx-01-x-x-xx-mkt.slddrw notes: 1. represents a critical dimension. 2. all assemblies to be 100 % electronically tested for shorts and opens. 3. all assemblies to be 100 % hi-pot tested at 630v. 4. to be measured from score line. 5. parts to be layer packaged. 6. si data available for standard lengths only. 7. max cable length available without flat. ribbonized section ia 18.61 inches. contact samtec for number of flat sections if longer length is required. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision c
-t: transfer end fig. 4 fmtp-10-t-8.77-01-x-n (same as fig. 4 except as shown) "xx.xx" .225 .250 - .100 + .150 in process c6 c7 (see note 4) sheet of .050 x .050 c/l twisted pair male idc assembly by: fmtp-xx-x-xx.xx-01-x-x-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing lenny k 3/16/07 2 2 sheet scale: 1:1 revision c f:\dwg\misc\mktg\fmtp-xx-x-xx.xx-01-x-x-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
