rej03g0070-0200 rev.2.00 mar 05, 2007 page 1 of 5 hrd0103c silicon schottky barrier diode for rectifying rej03g0070-0200 rev.2.00 mar 05, 2007 features ? low reverse voltage drop and suitable for high efficiency reverse current. ? lineup of environmental friendly halogen free type (HRD0103C-N) ? super small flat lead package (sfp) is suitable for surface mount design. ordering information part no. laser mark package name package code hrd0103c HRD0103C-N (halogen-free type) s6 sfp pusf0002zb-a pin arrangement cathode mark mark 1. cathode 2. anode 1 2 s6
hrd0103c rej03g0070-0200 rev.2.00 mar 05, 2007 page 2 of 5 absolute maximum ratings (ta = 25 c) item symbol value unit peak reverse voltage v rm * 1 30 v reverse voltage v r 30 v average rectified current i o * 1 100 ma peak forward surge current i fm 300 ma non-repetitive peak forward surge current i fsm * 2 1 a junction temperature tj 125 c storage temperature tstg ? 55 to +125 c notes: 1. see from fig.3 to fig.5. 2. 10 ms sine wave 1 pulse. electrical characteristics (ta = 25 c) item symbol min typ max unit test condition v f1 ? ? 0.4 v i f = 10 ma forward voltage v f2 ? ? 0.6 v i f = 100 ma i r1 ? ? 0.1 v r = 5 v reverse current i r2 ? ? 0.2 a v r = 10 v capacitance c ? ? 8.0 pf v r = 0.5 v, f = 1 mhz thermal resistance rth(j-a) ? 600 ? c/w polyimide board * 1 notes : 1. polyimide board unit: mm 3.0 0.8 1.5 20h 15w 0.8t 1.5 2. for sfp package, the material of lead is exposed fo r cutting plane. there for, soldering nature of lead tip part is considered as unquestioned. pleas e kindly consider soldering nature.
hrd0103c rej03g0070-0200 rev.2.00 mar 05, 2007 page 3 of 5 main characteristic 0 0.2 0.4 0.6 0.8 1.0 0 0.005 0.020 0.015 0.010 030 20 40 0.025 pulse test forward voltage v f (v) fig.1 forward current vs. forward voltage 10 ?3 10 ?2 10 ?5 10 ?4 1.0 10 ?6 10 ?1 10 ?3 10 ?8 10 ?5 10 ?4 10 ?7 10 ?6 reverse voltage v r (v) fig.2 reverse current vs. reverse voltage reverse current i r (a) forward current i f (a) ta = 75 c ta = 25 c pulse test t t 0v tj = 125 c d=1/3 d=5/6 sin( =180 ) 10 0.030 0.15 0.10 0 reverse power dissipation pd (w) fig4. reverse power dissipation vs. reverse voltage reverse voltage v r (v) fig3. forward power dissipation vs. forward current forward current i f (a) forward power dissipation pd (w) dc 0.05 0 0.02 0.08 0.12 d=1/6 d=1/3 t t 0a tj = 25 c 0.04 0.06 0.10 d=1/2 d = ? t t sin( =180 ) d = ? t t d=1/2 0 5 15 25 30 10 20 ta = 25 c ta = 50 c ta = 75 c
hrd0103c rej03g0070-0200 rev.2.00 mar 05, 2007 page 4 of 5 050100 25 75 125 0 80 40 120 100 60 20 average rectified current i o ( m a) ambient temperature ta ( c ) fig.5 average rectified current vs. ambient temperature d=1/2 v r =v rrm /2 tj =125c rth(j-a)=600c/w d=1/6 d=1/3 dc -25 sin( =180 )
hrd0103c rej03g0070-0200 rev.2.00 mar 05, 2007 page 5 of 5 package dimensions ? 0.0010g mass[typ.] sfp / sfpv pusf0002zb-a renesas code jeita package code previous code a c e h e d b e 1 b pattern of terminal position areas a b c d e h e e 1 0.25 0.50 0.08 0.55 0.90 1.30 0.30 0.13 0.60 0.50 1.40 1.00 1.40 0.55 0.35 0.18 0.65 1.10 1.50 dimension in millimeters reference symbol min nom max b package name sfp
notes: 1. this document is provided for reference purposes only so that renesas customers may select the appropriate renesas product s for their use. renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of renesas or any third party with respect to the information in this document. 2. renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of t he use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. you should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. when exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. all information included in this document such as product data, diagrams, charts, programs, algorithms, and application ci rcuit examples, is current as of the date this document is issued. such information, however, is subject to change without any prior notice. before purchasing or using any renesas products listed in this document, please confirm the latest product information with a renesas sales office. also, please pay regular and careful attentio n to additional and different information to be disclosed by renesas such as that disclosed through our website. (http://www.renesas.com ) 5. renesas has used reasonable care in compiling the information included in this document, but renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. when using or otherwise relying on the information in this document, you should evaluate the information in light of the t otal system before deciding about the applicability of such information to the intended application. renesas makes no representations, warranties or guaranties regarding th e suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this do cument or renesas products. 7. with the exception of products specified by renesas as suitable for automobile applications, renesas products are not desi gned, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of h uman injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion co ntrol, aerospace and aeronautics, nuclear power, or undersea communication transmission. if you are considering the use of our products for such purposes, please contact a r enesas sales office beforehand. renesas shall have no liability for damages arising out of the uses set forth above. 8. notwithstanding the preceding paragraph, you should not use renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to us e renesas products in any of the foregoing applications shall indemnify and hold harmless renesas technology corp., its affiliated companies and their officers, dir ectors, and employees against any and all damages arising out of such applications. 9. you should use the products described herein within the range specified by renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas sha ll have no liability for malfunctions or damages arising out of the use of renesas products beyond such specified ranges. 10. although renesas endeavors to improve the quality and reliability of its products, ic products have specific characteristic s such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. please be sure to implement safety measures to guard against the poss ibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas product, such as safety design for hardware and software includin g but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. among others, sinc e the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. in case renesas products listed in this document are detached from the products to which the renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. you should implement safety measures so that renesas products may not be easily detached from your products. renesas shall have no liability for damages arising out of such detachment. 12. this document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from r enesas. 13. please contact a renesas sales office if you have any questions regarding the information contained in this document, renes as semiconductor products, or if you have any other inquiries. sales strategic planning div. nippon bldg., 2-6-2, ohte-machi, chiyoda-ku, tokyo 100-0004, japan http://www.renesas.com refer to " http://www.renesas.com/en/network " for the latest and detailed information. renesas technology america, inc. 450 holger way, san jose, ca 95134-1368, u.s.a tel: <1> (408) 382-7500, fax: <1> (408) 382-7501 renesas technology europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k. tel: <44> (1628) 585-100, fax: <44> (1628) 585-900 renesas technology (shanghai) co., ltd. unit 204, 205, aziacenter, no.1233 lujiazui ring rd, pudong district, shanghai, china 200120 tel: <86> (21) 5877-1818, fax: <86> (21) 6887-7898 renesas technology hong kong ltd. 7th floor, north tower, world finance centre, harbour city, 1 canton road, tsimshatsui, kowloon, hong kong tel: <852> 2265-6688, fax: <852> 2730-6071 renesas technology taiwan co., ltd. 10th floor, no.99, fushing north road, taipei, taiwan tel: <886> (2) 2715-2888, fax: <886> (2) 2713-2999 renesas technology singapore pte. ltd. 1 harbour front avenue, #06-10, keppel bay tower, singapore 098632 tel: <65> 6213-0200, fax: <65> 6278-8001 renesas technology korea co., ltd. kukje center bldg. 18th fl., 191, 2-ka, hangang-ro, yongsan-ku, seoul 140-702, korea tel: <82> (2) 796-3115, fax: <82> (2) 796-2145 renesas technology malaysia sdn. bhd unit 906, block b, menara amcorp, amcorp trade centre, no.18, jalan persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: <603> 7955-9390, fax: <603> 7955-9510 renesas sales offices ? 2007. renesas technology corp., all rights reserved. printed in japan. colophon .7.0
|
