product description features hwdmg series min max unit pass channel wavelength range 1 type 1315 1260 1360 nm type 1513 1520 1600 nm refection channel wavelength range 2 type 1315 1520 1600 nm type 1513 1260 1360 nm insertion loss * pass channel @ 1 refect channel @ 2 0.8 0.8 db isolation refect channel @ 1 pass channel @ 2 45 45 db passband ripple 0.30 db directivity 50 db return loss 50 db polarization dependent loss 0.2 db polarization mode dispersion 0.05 ps maximum power handling 500 mw operating temperature 0 to +70 c storage temperature -40 to +85 c fiber type corning smf-28 package dimensions ** 250 m bare fiber 900 m loose tube p1: (?) 5.5 x (l) 34.0 p2: (?) 5.5 x (l) 40.0 mm applications performance specification ns note: * values are referenced without connector loss. ** the mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom speci- fed. *** the maximum il is under all states of polarization and within the full operating temperature and wavelength ranges specifed. s0016 - r05. 20100603 green high isolation 1310/1550 nm micro-optic wdm hwdmg series oplinks high-isolation micro-optic wavelength division multiplexer (hwdm) is based on thin-flm flter technology and metal bonding micro-optic packaging. this component is used to combine or separate 1310 and 1550nm band signal. the hwdm device offers a very fat and wide passband, low insertion loss, and much higher isolation than the mwdm device. this product is ideal for high-power op - tical amplifcation system and wdm network applications. all oplink products are epoxy-free in the optical path. oplink hwdm devices are bellcore gr-1221 qualifcation tested. ? environmental green plan compliance ? wide operating wavelength range ? low insertion loss ? high channel isolation ? ultra flat wide passband ? highly stable & reliable ? epoxy-free optical path ? bi-directional wdm systems ? uni-directional wdm systems ? catv systems
46335 landing pkwy fremont, ca 94538 tel: (510) 933-7200 fax: (510) 933-7300 email: sales@oplink.com ? www.oplink.com hwdmg ordering information product lines: ? mux/demux ? switching/routing ? coupling/splitting ? monitoring/conditioning ? amplifcation ? transmission ? interconnect ? rgb laser modules mechanical drawing / package dimensions (dimension in mm) p1: smf-28 250 m bare fber p2: 900 m loose tube oplink can provide a remarkable range of customized optical solutions. for detail, please contact oplinks oem design team or account manager for your requirements and ordering information (510) 933-7200. 0 0 package & fiber jacket p1 + 250 m bare fber = 11 p2 + 900 m loose tube = 22 wavelength fiber length* 1310 nm pass = 1315 1550 nm pass = 1513 0.5 meter = h 1.0 meter = 1 1.5 meters = 5 2.0 meters = 2 connector type none = 1 fc/pc = 2 fc/spc = 3 fc/apc = 4 sc/pc = 5 sc/spc = 6 sc/apc = 7 st = 8 lc = 9 mu = a green high isolation 1310/1550 nm micro-optic wdm hwdmg series s0016 - r05. 20100603 * the tolerance of fber length is +/-0.1m. 1 meter is standard. the lead-time for special fber length will be longer.
|