View A060SE02-V1_7669016.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

customer approval sheet company name model a060se02 v1 customer approved approval for specifications only (spec. ver. 0.5) approval for specifications and es sample (spec. ve r. 0.5) approval for specifications and cs sample (spec. ve r. 0.5) customer remark : auo pm : yw liu p/n : comment : 1 li-hsin rd. 2. science-based industrial park hsinchu 300, taiwan, r.o.c. tel: +886-3-500-8899 fax: +886-3-577-2730
all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. doc. version : 0.5 total pages : 24 date : 2009/10/14 product specification 6" epd module model name a060se02 v1 planned lifetime: from 2009/jul. to 2011/jul. phase-out control: from 2011/mar. to 2011/jul. eol schedule: 2011/jul. < >preliminary specification < >final specification note: the content of this specification is subject to change. ? 2009 au optronics all rights reserved, do not copy.
version: 0.5 page: 1/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. record of revision version revise date page content 0.0 2009/05/04 all first draft. 7 9 update vcomdc vcomh vcoml vdps vdns pin define 16 add vcom relationship. 17~18 update power on/off sequence 19 update reflectance 0.1 2009/07/06 21 update ra condition 10 add i/o pin sturcture 19 update optical condition 0.2 2009/07/09 21 update ra condition 3 update thickness 4 update module drawing 10 update power consumption 17 update optical performance 0.3 2009/09/04 19 update ra condition 0.4 2009/09/08 17 update optical performance 10 update power consumption 15 update power on/off characteristics 18~19 update ra conditions 0.5 2009/10/14 24 update application circuit
version: 0.5 page: 2/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. contents a. general information................................ ................................................... ...........3 b. outline dimension .................................. ................................................... ...........4 c. electrical specifications .......................... ................................................... ...........5 1. pin assignment ..................................... ................................................... ................................................... ....... 5 2. absolute maximum ratings ........................... ................................................... .............................................. 9 d. electrical characteristics ......................... ................................................... .........10 e. input timing ac characteristics .................... ................................................... 11 1. horizontal input timing ......................... ................................................... ................................................... ....... 11 1.1 relation ship of input data and source output v oltage............................................. ................................... 12 2. vertical input timing ........................... ................................................... ................................................... ........... 13 3. vcom voltage definition ......................... ................................................... ................................................... .... 14 4. vcom relationship............................... ................................................... ................................................... ......... 14 f. power on/off characteristics....................... ................................................... ..15 g. optical specification .............................. ................................................... ..........16 h. reliability test items............................ ................................................... ..........18 i. packing and marking ................................ ................................................... .......20 1. packing form .................................... ................................................... ................................................... ............... 20 2. module/panel label information .................. ................................................... ................................................. 21 3. carton label information ........................ ................................................... ................................................... ..... 21 j. application note ................................... ................................................... ............22 1. application circuit............................. ................................................... ................................................... ............ 22
version: 0.5 page: 3/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. a. general information this product is for electric book application. no. item unit specification remark 1 screen size inch 6 (diagonal) 2 display resolution dot 800 (h) 600(v) 3 overall dimension mm 130.4(h) 104.6(v) 1.33(t ) note 1 4 active area mm 122.4(h)90.6(v) 5 dot pitch mm 0.153 (h)x 0.151(v) 6 gray level -- 16 7 weight g (34.3) note 1: not include fpc but include sealant. refer next page to get further information.
version: 0.5 page: 4/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. b. outline dimension
version: 0.5 page: 5/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. c. electrical specifications 1. pin assignment recommended connector : fh12-50s-0.5sh. pin no. symbol i/o i/o structure description remark 1 dummy -- -- dummy pin 2 vcom o -- vcom polarity output signal 3 vcom_bot i -- vcom signal setting pin 4 vcomdc p type2 external voltage for vcomdc power. 5 vcomh p -- external voltage for vcom high power. 6 vcoml p -- external voltage for vcom low power. 7 rst_n i type 3 global reset pin. low reset. 8 shd_n i type 3 dc-dc converter shut down pin. ?0? : enable.(panel shut down; default ) ?1? : disable. 9 pwr_rdy o type 1 power ready output. when shd_n from ?1? to ?0?: pwr_rdy will become ?0? . when shd_n from ?0? to ?1?: after 100ms, pwr_rdy wi ll become ?1?. note1 10 vcomin_0 i type 2 logic input for vcom voltage generate. 11 vcomin_1 i type 2 logic input for vcom voltage generate. 12 yoe i type 3 vertical output enable pin. note2 13 yclk i type 3 vertical clock. input note2 14 ud i type 3 vertical (up/down) scan direction. u/d = "l": shift up to down. default u/d = "h": shift down to up.
version: 0.5 page: 6/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 15 ydiod i/o type 5 16 ydiou i/o type 5 vertical start pulse input/output. these pins are used to input and output shift data. these pins are switched as input or output by setting the ud pin as follow. ud ydiou ydiod l output input h input output 17 xdiol i/o type 5 18 xdior i/o type 5 horizontal start pulse input/output. these pins are used to input and output shift data. these pins are switched as input or output by setting the shl pin as follow. shl xdiol xdior l input output h output input 19 ld i type 3 latch data. 20 d0 i type 3 data input, first pixel lsb 21 d1 i type 3 data input, first pixel msb 22 d2 i type 3 data input, second pixel lsb 23 d3 i type 3 data input, second pixel msb 24 d4 i type 3 data input, third pixel lsb 25 d5 i type 3 data input, third pixel msb 26 d6 i type 3 data input, forth pixel lsb 27 d7 i type 3 data input, forth pixel msb 28 shl i type 3 horizontal (left/right) scan direction. shl = ?l?: shift right to left. shl = ?h?:shift left to right. default 29 xclk i type 3 horizontal clock input.. note3 30 vref c -- for power setting capactor connected pin. 31 vr p -- vcomdc reference voltage 32 avdd c -- for power setting capactor connected pin. 33 c1p c -- for charge pump capactor connected pin. 34 c1n c -- for charge pump capactor connected pin. 35 vss p -- digital ground 36 vssa p -- analog ground. 37 vdd p -- analog power. 38 vref_pos c -- for power setting capactor connected pin. 39 vref_neg c -- for power setting capactor connected pin.
version: 0.5 page: 7/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 40 vddx8 p -- dcdc positive voltage 41 nvddx8 p -- dcdc negative voltage 42 vdd_drv p -- dcdc power. 43 adrvu o type 1 pwm output for dcdc converter. 44 adrvd o type 1 pwm output for dcdc converter. 45 vss_drv p -- dcdc ground. 46 vdps p -- external voltage for source postive power. 47 vdns p -- external voltage for source negative power. 48 vdpg c -- for power setting capactor connected pin. 49 vdng c -- for power setting capactor connected pin. 50 dummy d -- dummy pin i: input pin; o:output pin, i/o: input / output; p: power pin; c: capacitor pin; d dummy note 1: please reference chapter f note 2: please reference chapter e note 3: please reference chapter e
version: 0.5 page: 8/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. i/o pin structure:

version: 0.5 page: 9/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. absolute maximum ratings item symbol condition min. max. unit remark power voltage vdd vssa=vss=0 -0.3 +5.0 v power voltage vdd_drv vss_drv=0 -0.3 +5.0 v vdps vssa=vss=0 +20 v source voltage vdns vssa=vss=0 -20 v vdpg vssa=vss=0 -0.3 vdng+40 gate voltage vdng vssa=vss=0 vdpg-40 +0.3 storage temperature tstg - -25 70 operating topa - 0 50
version: 0.5 page: 10/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. d. electrical characteristics item symbol condition min. typical max. unit vdd vssa=vss=vss_drv=0v -- 3.3 -- v supply voltage vdd_drv vssa=vss=vss_drv=0v -- 3.3 -- low level input voltage vil digital input pins gnd - 0.3xvdd v high level input voltage vih digital input pins 0.7xvdd - vdd v operating temperature t op - -- - c operation power dissipation vdd=vdd_drv=3.3v vdns -15v vdps 15v vcomh 11.5v vcoml -18.5v -- (21) (28) ma standby power dissipation vdd=vdd_drv=3.3v vdns 0v vdps 0v vcomh 0v vcoml 0v -- (0.2) (1) ma
version: 0.5 page: 11/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. e. input timing ac characteristics 1. horizontal input timing figure 1: ld input timing n=800 figure 2: horizontal data input timing
version: 0.5 page: 12/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. (vdd=vdd_drv=3.3v, vssa=vss=vss_drv=0v, ta=25 ) parameter symbol min. typ. max. unit clock pulse width t wxdclk 13 ns data setup time t setup 2 - - ns data hold time t hold 2 - - ns ld pulse width t wld 1 - - xclk time from ld to xdiol/xdior t ld_dio 5 - - xclk 1.1 relation ship of input data and source output v oltage the source driver output voltage will base on input 2 bits data, and the relationship is as below: msb lsb function 0 0 source output is 0v 0 1 source output is vdps(+15v) 1 0 source output is vdns(-15v) 1 1 source output is floating
version: 0.5 page: 13/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. vertical input timing yclk ydiou/ ydiod (input) ydiou/ ydiod (output) yoe g1 g2 1 2 n 3 g3 gn n=600 figure 3: vertical input timing
version: 0.5 page: 14/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 3. vcom voltage definition the vcom output voltage will base on input pins vco min[1:0], and the relationship is as below: vcomin[1 :0] function 00 vcom output is (-vdc) v 01 vcom output is (vdps-vdc) v 10 vcom output is (vdns-vdc) v 11 vcom output is floating 4. vcom relationship vcom will change while vocmin change source output will change while ld signal falling e dge.
version: 0.5 page: 15/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. f. power on/off characteristics 1. recommended power on/off sequence the suggested power on/off sequence is below: power on sequence: 2. power off sequence: vdd vdns vdps vcomh vcoml nvddx8 (vdng) vddx8 (vdpg) >1ms shd_n >1ms -20v 20v -15v 15v vcoml vcomh
version: 0.5 page: 16/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. g. optical specification all optical specification is measured under typical condition (note 1, 2) item symbol condition min. typ. max. unit remark reflectance r white 30 33 -- % note1,4 contrast ratio cr at optimized viewing angle 5 6 -- note1, 5 response time t r t f 30v 30v (300) (300) ms note 3 note 1. ambient temperature =25 note 2. reflectance and constrast ratio are measure d by konica minolta spectrophotometer cm-2600d.
version: 0.5 page: 17/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note 3. definition of response time: the response time is defined as the time from imag e load to full updated display. the output signals of photo detector are measured w hen the input signals are changed from ?black? to ?white?(raising time) and from ?whi te? to ?black?(falling time), respectively. refer to figure as below. note 4. definition of reflectance: the reflectance is expressed as: r = reflectance factor white board x (l center / l white board ) l center is the luminance measured at center in a white are a. l white board is the luminance of a standard white board. note 5. definition of contrast ratio: the contrast ratio (cr) is the ratio between the re flectance in a full white area (rl) and reflectance in a dark area (rd). rd rl (cr) ratio contrast = signal (relative value) "black" tf "white" "white" 0 % 90 % 100 % tr
version: 0.5 page: 18/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. h. reliability test items test condition condition remark 1 high-temperature operation tamb=+50 , rh=30% for 240hrs iec 60068-2-2bp at the end of the test electric,mechanical, and optical specifications shall be satisfied. 2 low-temperature operation tamb=0 for 240hrs iec 60068-2-2ab at the end of the test electric,mechanical, and optical specific ations shall be satisfied. 3 high-temperature functional tamb=+60 , rh=26% for 240hrs iec 60068-2-2bp at the end of the test electric,mechanical, specifications shall be satisfied. 4 low-temperature functional tamb=-10 for 240hrs iec 60068-2-2ab at the end of the test electric,mechanical, specifications shall be satisfied. 5 high-temperature storage tamb=+70 , rh=23% for 240hrs iec 60068-2-2bp at the end of the test electric,mechanical, and optical specifications shall be satisfied. 6 low-temperature storage tamb=-25 for 240hrs iec 60068-2-2ab at the end of the test electric,mechanical, and optical specifications shall be satisfied. 7 high-temperature, high-humidity operation tamb=+40 , rh=90% for 168hrs iec 60068-2-3ca at the end of the test electric ,mechanical, specifications shall be satisfied. 8 high-temperature, high-humidity storage tamb=+60 , rh=80% for 240hrs iec 60068-2-3ca at the end of the test electric,mechanical, specifications shall be satisfied. 9 temperature cycle 1 cycle [-25 c 30min] -> [+70 c 30min] 100 cycles iec 60068-2-14 at the end of the test electric,mechanical, specifications shall be satisfied. 10 sunlight effect 1120mw/cm2 for 168hrs, 40 iec 60068-2-5sa at the end of the test electric,mechanical, and optical specificatio ns shall be satisfied. 11 package vibration 1.04g, frequency 10 ~ 500hz direction x, y, z duration 1 hours in each direction at the end of the test electric,mechanical, and optical specifications shall be satisfied. 12 package drop impact drop from hei ght of 100 cm on concrete surface. drop sequence 1 corner, 3 edges, 6 faces one drop for each. at the end of the test electric,mechanical, and optical specifications shall be satisfied.
version: 0.5 page: 19/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 13 electrostatic discharge air-mode : +/- 8kv contact-mode : +/- 4kv iec 61000-4-2 at the end of the test electric,mechanical, specifications shall be satisfied. (note. 3) 14 altitude test operation 700hpa(=3,000m) 48hrs at the end of the test electric,mechanical, specifications shall be satisfied. 15 altitude test storage 260hpa(=10,000m) 48hrs at the end of the test electric,mechanical, specifications shall be satisfied. 16 fpc soldering strength pull the fpc soldered part with a force of 500g in the horizontal and vertical directions at the end of the test ele ctric,mechanical, specifications shall be satisfied. 17 fpc bending performance apply mit method. bending rate radius 1.0mm weight 500gf, bending angle 135 bending cycle 20 times at the end of the test electric,mechanical, specifications shall be satisfied. 18 stylus tapping polyacetal pen top r0.8mm load 300gf speed 3 times/sec total 13,500 times pass criteria - no glass breakage or damage to microcapsules. note 1. tamb: ambient temperature = 2 5 note 2. in the standard conditions, there is not di splay function ng issue occurred. all the cosmetic specification is judged before the reliability stre ss. note 3. esd testing method. 1. ambient: 24~26 , 56~65%rh, atmospheric pressure : 940~960hpa 2. instruments:noisekeness-2000, 3. operation system: auo pattern generator 4. test mode: non-operating mode, test pattern: che ss 5. test method: a. contact discharge: 150pf(330 ) 1sec, 8 points, 25 times/point b. air discharge: 150pf(330 ) 1sec, 8 points, 25 times/point 6. test point:
version: 0.5 page: 20/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. i. packing and marking 1. packing form
version: 0.5 page: 21/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. module/panel label information the module/panel (collectively called as the ?produ ct?) will be attached with a label of shipping number which represents the identification of the product at a specific location. refer to the product outline drawing for detailed l ocation and size of the label. the label is composed of a 22-digit serial number and printed wi th code 39/128 with the following definition: 3. carton label information the packing carton will be attached with a carton l abel where packing q?ty, auo model name, auo part number, customer part number (optional) an d a series of carton number in 13 or 14 digits are printed. the carton number is appari ng in the following format: refer to the drawing of packing format for the loca tion and size of the carton label.
version: 0.5 page: 22/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. j. application note 1. application circuit
version: 0.5 page: 23/24 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. precautions 1. do not twist or bend the module and prevent the unsuitable external force for display module during assembly. 2. adopt measures for good heat radiation. be sure to use the module with in the specified temperature. 3. avoid dust or oil mist during assembly. 4. follow the correct power sequence while operatin g. do not apply the invalid signal, otherwise, it will cause improper shut down and damage the mod ule. 5. less emi: it will be more safety and less noise. 6. please operate module in suitable temperature. t he response time & brightness will drift by different temperature. 7. be sure to turn off the power when connecting or disconnecting the circuit. 8. display surface never likes dirt or stains. 9. a dewdrop may lead to destruction. please wipe o ff any moisture before using module. 10. high temperature and humidity may degrade perfo rmance. please do not expose the module to the direct sunlight and so on. 11. acetic acid or chlorine compounds are not frien ds with display module. 12. static electricity will damage the module, plea se do not touch the module without any grounded device. 13. do not disassemble and reassemble the module by self. 14. be careful do not touch the rear side directly. 15. no strong vibration or shock. it will cause mod ule broken. 16. storage the modules in suitable environment wit h regular packing. 17. be careful of injury from a broken display modu le. 18. please avoid the pressure adding to the surface (fr ont or rear side) of modules, because it will cause the display non-uniformity or other func tion issue.

▲Up To Search▲

Price & Availability of A060SE02-V1

	To Download A060SE02-V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .