manufacturer category series package voltage class rev . date ecliptek corp. oscillator E13C7 ceramic 3.3v os1m 01/07 E13C7 series oscillator E13C7 electrical specifications 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. ? rohs compliant (pb-free) lvpecl output oscillators 3.3v supply voltage ceramic 6-pad smd package stability to 25ppm tri-state output complementary output available on tape and reel wide range of available frequencies 0c to 70c, or -40c to +85c -55c to 125c 3.3v dc 5% 75ma maximum 100ppm, 50ppm, or 25ppm maximum v cc -1.025v dc minimum v cc -1.085v dc minimum v cc -1.620v dc maximum v cc -1.555v dc maximum 300psec typical, 700psec maximum 50 5(%) 50 ohms into v cc -2.0v dc tri-state and complementary output enables output enables output disables output: high impedance 30a maximum 10 mseconds maximum 0.4psec typical, 1 psec maximum -60dbc/hz at 10hz offset -95dbc/hz at 100hz offset -125dbc/hz at 1khz offset -143dbc/hz at 10khz offset -145dbc/hz at 100khz offset -145dbc/hz at 1mhz offset -146dbc/hz at 10mhz offset nominal frequency (mhz) operating temperature range storage temperature range supply voltage (v cc ) input current frequency tolerance / stability output voltage logic high (v oh ) output voltage logic low (v ol ) rise time / fall time duty cycle load drive capability logic control / additional output tri-state input voltage standby current start up time rms phase jitter typical phase noise inclusive of all conditions: calibration tolerance at 25c, frequency stability over the operating temperature range, supply voltage change, output load change, 1st year aging at 25c, shock, and vibration 0c to 85c -40c to 0c 0c to 85c -40c to 0c 20% to 80% of waveform at 50% of waveform v ih of 70% of v cc minimum no connection v il of 30% of v cc maximum without load fj = 12khz to 20mhz fo=156.250mhz h 2.0 l 7.0 w 5.0 77.760m, 78.125m, 80m, 80.157m, 85m, 87.125m, 90m, 100m, 106.25m, 110m, 119m, 120m, 122.888m, 124.4m, 125m, 127m, 128m, 133m, 133.333m, 137.472m,150m, 155.52m, 156.25m, 159.375m, 161.1328m, 162.5m, 166m, 170m, 175m, 176.83816m, 187.5m, 187.509375m, 200m, or 212.5mhz
line 1: ecliptek line 2: xx.xxx m frequency in mhz (5 digits maximum + decimal) line 3: xx y zz week of year last digit of year ecliptek manufacturing identifier manufacturer category series package voltage class rev . date ecliptek corp. oscillator E13C7 ceramic 3.3v os1m 01/07 mechanical dimensions all dimensions in millimeters environmental/mechanical specifications marking specifications tape and reel dimensions all dimensions in millimeters suggested solder pad layout all dimensions in millimeters 800-ecliptek www.ecliptek.com for latest revision specifications subject to change without notice. E13C7 e 2 f - 155.520m tr part numbering guide available options blank=tubes tr=tape and reel (standard) frequency logic control/additional output f=tri-state and complementary output frequency tolerance & stability/ operating temperature range c=100ppm maximum over 0c to +70c d=50ppm maximum over 0c to +70c e=25ppm maximum over 0c to +70c g=100ppm maximum over -40c to +85c h=50ppm maximum over -40c to +85c j=25ppm maximum over -40c to +85c (*) duty cycle 2=50 5(%) a b c d e f 16.3-.1 7.5.1 6.75.1 4 .1 2.1 f g h j k l 8.1 b0* 1.5 +.1-0 a0* .3 .05 k0* tape m n o p q 1.5 min 50 min 20.2 min 13.2 40 min r s t u v qty/reel 2.5 min 10 min 22.4 max 360 max 16.4+2-0 1,000 reel *compliant to eia 481a tolerances= +0.1 markining orientation 5.00 0.20 7.00 +0.70/ -0.15 5.08 0.20 2.54 0.10 1.2 +0.3/ -0.2 2.60 +0.40/-0.60 1 2 3 4 5 6 1.4 0.2 2.00 max characteristic specification fine leak test mil-std-883, method 1014, condition a gross leak test mil-std-883, method 1014, condition c mechanical shock mil-std-202, method 213, condition c vibration mil-std-883, method 2007, condition a solderability mil-std-883, method 2002 temperature cycling mil-std-883, method 1010 resistance to soldering heat mil-std-202, method 210 resistance to solvents mil-std-202, method 215 pin 1: tri-state pin 2: no connect pin 3: case ground pin 4: output pin 5: complementary output pin 6: supply voltage (*) not available over nominal frequency range of 176.83816mhz to 212.500mhz
|