range: accuracy: resolution: beam width: dead band: supply voltage: loop resistance: consumption: signal output: loop fail-safety: configuration: t emp. comp.: process temp.: ambient temp.: pressure: enclosure: encl. material: strain relief mat.: t rans. material: cable length: cable jacket mat.: process mount: mount. gasket: classification: approvals: 49.2? (1.25 m) 0.125" (3 mm) 0.019" (0.5 mm) 2" (5 cm) 2" (5 cm) 24 vdc (loop) 400 ? max @ 24 vdc 0.5w 4-20 ma , two-wire reversible ma 4 ma, 20 ma, 21 ma, 22 ma, hold last w ebcal? usb 2.0 automatic over range f: -20? to 140? c: -7? to 60? f: -31? to 140? c: -35? to 60? mwp = 30 psi t ype 6p encapsulated, corrosion resistant & submersible polycarbonate santoprene pvdf 48? (1.2 m) polyurethane 1" npt (1" g) v iton? general purpose ce, cfmus specifcations actual size echopod dl10 ultrasonic level transmitter ? dl10- process mount (1) 0 npt (us) 1 g (metric) echopod fob usb interface (2) 0 without fob 1 with fob ordering note s 1) echopod can not be config ured without the fob usb interface tool (li99-1001) and we b cal. one fob will configure all echopods. 2) w ebcal is a free download from our website at www.flowline.com (windows? xp compatible, usb 2.0). ? ordering ? 2009 flowline inc. u.s. patent #: 7,098,669 2.70" (69 mm) 2.00" (51 mm) .89" (23 mm) 3.20" (81 mm) 48" (2 m) 1" npt (1" g) ds300230 rev: a confguration echopod is confgured using flowlines webcal software and fob, a usb? in- terface tool. a single confguration can be easily created, saved, duplicated, emailed or modifed. take control of your level process with webcals intuitive interface, pre-programmed menus, tank set point graphics and custom wiring diagrams for each of your confgurations. its level con- fguration made simple. features transmitter provides 4-20 ma level measurement compact sensor with 2 beam width and 2 dead band optimized for small tank applications rugged pvdf transducer and polycar- bonate enclosure rated 6p for corrosive media webcal software li99-1001 shown introducing echopod the general purpose, dl10 ultrasonic sensor pro- vides non-contact level measurement up to 49.2 (1.25m) with a 4-20 ma output. the dl10 directly replaces contact measurement sensors connected to a plc analog input card for easy design conver- sion or feld retroft. the two-wire, 4-20 ma output is ideal for longer signal distances up to 1000. the sensor is well suited for a wide range of corrosive, sticky or dirty type media. the dl10 is broadly se- lected for small atmospheric tank, ibc, drum, skid or process vessel and sump applications. to confgure echopod, download our free webcal software and purchase one usb interface tool.
|
