 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| test procedure for the nc p1521b evalu a tion board 5/31/2007 equipment needed ? power supply ? digita l volt meter ? digita l am p meter test 1. jum p er enable shoul d be open. 2. jum p er select should be closed to 1.2v. 3. set the pow er supply to 3.6v and the current limit of at least 800m a . 4. connect the power supply connector to c onnectors vin+ and vin-. the dc current m easure m ent on vin line should be around 0.3a. 5. close enable connector. the dc current m easurem ent on vin line should be around 40a. 6. measure the output voltage between vout + and vout- con n ectors. you should see around 1.2v voltage operation. 7. re m ove the enable jumper. the dc current m easurem ent on vin line should be back around 0.3a.
|
Price & Availability of NCP1521BEVB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |