unisonic technologies co., ltd UG9H preliminary dual transistor www.unisonic.com.tw 1 of 3 copyright ? 2013 unisonic technologies co., ltd qw-r218-026.b general purpose (dual digital transistors) ? description the utc UG9H is a dual digital transistor, the transistor elements are independent and obviating interf erence, so the mounting cost and area can be cut in half. ? features * mounting cost and area can be cut in half. * transistor elements are independent, obviating interference. ? equivalent circuit ? ordering information ordering number package packing lead free halogen free 1 2 3 4 5 6 UG9Hl-ag6-r UG9Hg-ag6-r sot-26 g1 i1 o2 g2 i2 o1 tape reel note: pin assignment: g: gnd i: input o: output ? marking information
UG9H preliminary dual transistor unisonic technologies co., ltd 2 of 3 www.unisonic.com.tw qw-r218-026.b ? absolute maximum ratings (t a =25 c) parameter symbol ratings unit supply voltage v cc 50 v input voltage v in -6 ~ +40 v output current i o 70 ma i c 100 ma power dissipation (note 2) p d 150 mw junction temperature t j 150 c storage temperature t stg -55 ~ +150 c notes: 1. absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 2. 120mw per element must not be exceeded. ? electrical characteristics (t a =25 c) parameter symbol test conditions min typ max unit input voltage v i ( off ) v cc =5v, i o =100 a 0.5 v v i ( on ) v o =0.3v, i o =10ma 3 v output voltage v o ( on ) i o /i i =10ma/0.5ma 0.1 0.3 v input current i i v i =5v 0.88 ma output current i o ( off ) v cc =50v, v i =0v 0.5 a dc current gain g i v o =5v, i o =5ma 30 transition frequency f t v ce =10v, i e =-5ma, f=100mhz (note 1) 250 mhz input resistance r 1 7 10 13 k ? resistance ratio r 2 / r 1 0.8 1 1.2 note: transition frequency of the transistor.
UG9H preliminary dual transistor unisonic technologies co., ltd 3 of 3 www.unisonic.com.tw qw-r218-026.b utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|