aqs610ts 93 2 3 4 5 6 7 16 15 14 13 1 8 12 11 10 9 relay portion (2,3,14,15,16 pins) (4,5,11,12,13 pins) detector portion (6,7,9,10 pins) photomos relays gu (general use) type sop series multi-function (1a1b mosfet & optocoupler) 16 pin type 1a1b mosfet relay and 1 optocoupler type mm inch 2.1 .083 4.4 .173 10.37 .408 features 1. so package 16-pin type in super miniature design the device comes in a super-miniature so package 16-pin type measuring (w)4.4 (l)10.37 (h) 2.1mm (w).173 (l).408 (h).083inch 2. ideal for pc card and fax/modem ap- plications the small size provides additional space for increased functionality. the new de- vice has been speci?cally designed for the pcmcia embedded and handheld device markets. 3. tape and reel the device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automat- ic insertion machines. typical applications ? pcmcia modem card (data/fax modem) ? laptop and notebook computers ? pda's ? mobile computing equipment ? medical equipment ? security systems ? meters (water, gas, vending machine) types * indicate the peak ac and dc values. notes: (1) tape package is the standard packing style. also available in tube. (part no. suf?x "x" or "z" is not needed when ord ering; tube: 50 pcs.; case: 1,000 pcs.) (2) for space reasons, the package type indicator "x" and "z" are omitted from the seal. 1 optocoupler type output rating* part no. packing quantity in tape and reel load voltage load current picked from the 1/2/3/4/5/6/7/8-pin side picked from the 9/10/11/12/13/14/15/16-pin side ac/dc type 350 v 100 ma AQS610TSX aqs610tsz 1,000 pcs. rating 1. absolute maximum ratings (ambient temperature: 25 c 77 f ) 1) relay portion (2, 3, 14, 15, 16 and 4, 5, 11, 12, 13 pins) 2) detector portion (6, 7, 9, 10 pins) 3) others item symbol aqs610ts remarks input led forward current i f 50 ma led reverse voltage v r 3 v peak forward current i fp 1 a f = 100 hz, duty factor = 0.1% power dissipation p in 75 mw output load voltage v l 350 v continuous load current i l 0.1 a (0.12 a) ( ) : in case of using only 1 channel peak load current i peak 0.36 a 100 ms (1 shot), v l = dc power dissipation p out 600 mw item symbol aqs610ts remarks input led forward current i f 50 ma peak forward current i fp 1 a f = 100 hz, duty factor = 0.1% power dissipation p in 75 mw output output voltage bv cec 30 v power dissipation p out 150 mw item symbol aqs610ts remarks total power dissipation p t 650 mw i/o isolation voltage v iso 1500 v ac temperature limits operating t opr C40 c to +85 c C40 f to +185 f non-condensing at low tempera- tures storage t stg C40 c to +100 c C40 f to +212 f testing
aqs610ts 94 2. electrical characteristics (ambient temperature: 25 c 77 f ) 1) relay portion (2, 3, 14, 15, 16 and 4, 5, 11, 12, 13 pins) note: recommendable led forward current i f = 5 ma 2) detector portion (6, 7, 9, 10 pins) 3) others *operate/reverse time for type of connection, see page 34. item symbol aqs610ts condition input led operate current typical i fon 0.9 ma i l =max. maximum 3 ma led reverse current minimum i foff 0.4 ma i l =max. typical 0.8 ma led dropout voltage typical v f 1.14 (1.25 v at i f =50ma) i f =5ma maximum 1.5 v output on resistance typical r on 18 w i f = 5 ma (n.o.), i f = 0 ma (n.c.) i l = max. within 1 s on time maximum 25 w off state leak- age current maximum i leak 1 m a i f = 0 ma (n.o.), i f = 5 ma (n.c.) v l = max. transfer char- acteristics operate time* typical t on 0.23 ms (n.o.), 0.52 ms (n.c.) i f = 0 ma ? 5 ma i l =max. maximum 1.0 ms reverse time* typical t off 0.04 ms (n.o.), 0.23 ms (n.c.) i f = 5 ma ? 0 ma i l =max. maximum 1.0 ms item symbol aqs610ts condition input led operate current typical i fon 2 ma i c = 2 ma v ce = 0.5 v maximum 6 ma led turn off current minimum i foff 5 m a i c = 1 m a v ce = 5 v typical 35 m a led dropout voltage typical v f 1.14 (1.25 v at i f = 50 ma) i f = 5 ma maximum 1.5 v output saturation volt- age typical v on 0.08 v i f = 15 ma i c = 2 ma maximum 0.5 v off state leak- age current typical i ceo 0.01 na i f = 0 v ce = 5 v maximum 500 na current trans- fer ratio minimum 33% i f = 5 ma v ce = 0.5 v typical 100% transfer char- acteristics turn on time* typical t on 0.01 ms i f = 5 ma v ce = 5 v i c =2 ma turn off time* typical t off 0.03ms i f = 5 ma v ce = 5 v i c = 2 ma item symbol aqs610ts condition transfer char- acteristics i/o capacitance typical c iso 0.8pf f = 1 mhz v b = 0 maximum 1.5pf initial i/o isola- tion resistance minimum r iso 1,000m w 500v dc ton input output 10% 90% 1) n.o. 2) n.c. toff toff input output 10% 90% ton n for dimensions, see page 28. n for schematic and wiring diagrams, see page 34. n for cautions for use, see page 36.
aqs610ts 95 reference data [1] relay portion (2, 3, 14, 15, 16 and 4, 5, 11, 12, 13 pins) 1. load current vs. ambient temperature char- acteristics allowable ambient temperature: C40 c to +85 c C40 f to +185 f 2. on resistance vs. ambient temperature char- acteristics led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 3. operate time vs. ambient temperature char- acteristics led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) ambient temperature, c load current, ma 0 40 60 0204060 80 85 ?0 ?0 20 80 100 120 130 using only 1 channel using 2 channels ambient temperature, c on resistance, w 0 10 20 30 40 ?0 ?0 50 0204060 80 85 between terminals 14 and 16(n.o.) between terminals 11 and 13(n.c.) ambient temperature, c operate time, ms 0 0.4 0.6 ?0 ?0 1.0 0204060 80 85 0.2 0.8 between terminals 14 and 16(n.o.) between terminals 11 and 13(n.c.) 4. reverse time vs. ambient temperature char- acteristics led current: 5 ma; load voltage: max. (dc); continuous load current: max. (dc) 5. led operate current vs. ambient tempera- ture characteristics load voltage: max. (dc); continuous load current: max. (dc) 6. led reverse current vs. ambient tempera- ture characteristics load voltage: max. (dc); continuous load current: max. (dc) ambient temperature, c reverse time, ms 0 ?0 ?0 20 40 60 100 80 85 1.0 0.8 0.6 0.4 0.2 0 between terminals 14 and 16(n.o.) between terminals 11 and 13(n.c.) ambient temperature, c led operate current, ma 0 1 2 3 4 ?0 ?0 5 0204060 80 85 between terminals 14 and 16(n.o.) between terminals 11 and 13(n.c.) ambient temperature, c led reverse current, ma 0 1 2 3 4 ?0 ?0 5 0204060 80 85 between terminals 14 and 16(n.o.) between terminals 11 and 13(n.c.) 7. led dropout voltage vs. ambient tempera- ture characteristics led current: 5 to 50 ma 8. voltage vs. current characteristics of output at mos portion ambient temperature: 25 c 77 f 9. off state leakage current ambient temperature: 25 c 77 f ambient temperature, c led dropout voltage, v 0 ?0 ?0 20 40 60 80 85 1.5 1.4 1.3 1.2 1.1 1.0 0 50ma 30ma 20ma 10ma 5ma 20 40 60 80 140 ?0 ?0 ?0 ?00 ?20 ?40 ? ? ? ?.5 ?.5 ?.5 1.5 2.5 123 0.5 ?0 voltage, v between terminals 14 and 16(n.o.) between terminals 11 and 13(n.c.) current, ma 120 100 load voltage, v off state leakage current, a 0 60 100 10 ? 10 ? 10 ? 10 ?2 20 40 80 between terminals 14 and 16(n.o.) between terminals 11 and 13(n.c.) 10. led forward current vs. operate time char- acteristics load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 11. led forward current vs. reverse time char- acteristics load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 12. applied voltage vs. output capacitance characteristics frequency: 1 mhz; ambient temperature: 25 c 77 f led forward current, ma operate time, ms 10 0 2030405060 5 4 2 3 1 0 between terminals 14 and 16(n.o.) between terminals 11 and 13(n.c.) led forward current, ma reverse time, ms 10 20 30 40 50 60 10 0 2030405060 0.5 0.4 0.3 0.2 0.1 0 between terminals 14 and 16(n.o.) between terminals 11 and 13(n.c.) applied voltage, v output capacitance, pf 0 120 100 80 60 40 20 10 20 30 40 60 50 0 between terminals 14 and 16(n.o.) between terminals 11 and 13(n.c.)
aqs610ts 96 [2] detector portion (6, 7, 9, 10 pins) 1. output loss vs. ambient temperature charac- teristics allowable ambient temperature: C40 c to +85 c C40 f to +185 f 2. relative output current vs. ambient tempera- ture characteristics measured portion: between terminals 6 and 7 i f = 5 ma, v ce = 0.5 v dc 3. led dropout voltage vs. ambient tempera- ture characteristics led current: 5 to 50 ma ambient temperature, c output loss, mw ?0 ?0 0 20 40 60 80 85 100 0 50 100 150 200 ambient temperature, c relative output current, % 0 50 100 150 0 ?0 ?0 20 40 60 8085 ambient temperature, c led dropout voltage, v 0 ?0 ?0 20 40 60 80 85 1.5 1.4 1.3 1.2 1.1 1.0 0 50ma 30ma 20ma 10ma 5ma 4-1. collector current vs. voltage between col- lector and emitter characteristics (i c -v ce ) measured portion: between terminals 6 and 7 ambient temperature: 25 c 77 f 4-2. collector current vs. voltage between col- lector and emitter characteristics (i c -v ce ) measured portion: between terminals 6 and 7 ambient temperature: 25 c 77 f 5. off state leakage current measured portion: between terminals 6 and 7 i f = 0 ma t a = 25 c 77 f voltage between collector and emitter, v collector current, ma 0 0 20 40 60 80 246810 pc(max.) i f =50ma i f =40ma i f =30ma i f =20ma i f =10ma i f =5ma voltage between collector and emitter, v collector current, ma 0 0 10 20 30 40 0.1 0.2 0.3 0.4 0.5 i f =50ma i f =40ma i f =30ma i f =20ma i f =10ma i f =5ma voltage between collector and emitter, v collector current, ma 0 0 10 20 30 40 0.1 0.2 0.3 0.4 0.5 i f =50ma i f =40ma i f =30ma i f =20ma i f =10ma i f =5ma 5/7/2001 all rights reserved, ? copyright matsushita electric works, ltd. go to online catalog
|
