View IS1000E-403_7798910.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

switch characteristics max. contact capacity voltage max. operating current impact resistance specifications model is1000-01 air/inert gas 1.0 mpa 0.7 mpa 0.1 to 0.4 mpa 0.08 mpa or less 0.05 mpa 0.05 mpa 1a grommet, lead wire length 0.5 m (standard) air ? to 60 c (no freezing) r 1/8 74 g 01 n01 port size lead wire length 3 m regulating pressure range 0.1 to 0.6 mpa lead wire length 3 m regulating pressure range 0.1 to 0.6 mpa x201 x202 x215 option how to order 0.1 0.2 0.3 0.4 0 0.5 set pressure scale (mpa) operating pressure (mpa) fluid proof pressure max. operating pressure regulating pressure range (at off point) hysteresis error of scale repeatability contacts wiring specifications fluid ambient and fluid temperature port size weight ac 2 va, 2 w dc 30 g 48 vac/dc 40 ma 24 vac/dc or less 50 ma 100 vac/dc 20 ma electrical circuit up to 100 vac/dc operating pressure range 0.4 0.3 0.2 0.1 is1000 r 1 / 8 npt 1 / 8 on pressure off pressure reed switch is1000-01 is1000-01-x202 nil s seal none with seal 01 s hysteresis mechanical style pressure switch series is1000 long service life: 5 million cycles for details about certified products conforming to international standards, visit us at www.smcworld.com. 16-9-1 zse ise pse z i se3 ps z i se 1 2 zsp isa2 is zsm pf2 if data
series is1000 16-9-2 warning warning warning construction description shield plate switch assembly piston pt fittings adjusting screw pointer spring scale plate miniseal y type magnet material rolled steel plate polyacetal zinc die-casted brass brass stainless steel 304-wpb rigid vinyl chloride nbr rare earth magnet no. q w e r t y u i o ! 0 component parts precautions mounting/piping r 1 / 8 23 58.5 50 20 ? 500 5 15 r e o ! 0 i y u t q w 0.4 0.3 0.2 0.1 is1000 mpa 3. internal circuit of contact protection box brown blue part no. cd-p11 cd-p12 voltage 100 vac 24 vdc lead wire length switch side: 0.5 m load side: 0.5 m choke coil surge absorber (+) brown (? blue choke coil condenser resistance cd-p11 cd-p12 1. connect load before connecting with power source. 2. in the case of induction load or lead wire ex- ceeding 5 m long, the following contact protec- tion box should be used. it may lead to dam- age to a switch. 4. how to connect contact protection box connect the lead wires from the body and the contact protective box side indicated ?witch? lead wire should be as short as possible, within 1 m. 5. dimensions of lead wire enclosure: ?3.4 insulator: ?1.1 conductor: ?0.64 warning pressure setting 1. do not use with corrosive gases or fluids. 2. never use in an environment where flamma- ble fluid or gas is used. since this is not an explosion-proof construction, it may lead to an explosive disaster. 3. avoid use in vacuum applications. switch may be imploded. warning operating environment 1. scale of switching set display is the set value at the pressure drop. 2. when detecting on-pressure signal, note that set pressure on scale plate plus on-off differ- ential (hysteresis) will be on-pressure signal. 3. pressure display on the scale plate is just as a reference guide. for an accurate setting, measure it by pressure gauge. 1. avoid using a switch in a magnetic environ- ment. it may cause a malfunction. 2. do not use in such an environment, where water or oil is splashed. since it is the open type construction, if water or oil make an ingress into the internal parts, the electric circuit will be corroded and may result in a malfunction or damage. 3. avoid vibration. vibration may cause malfunc- tion or may cause setting to be incorrect. 1. when changing piping by hand, hold body. electrical wire must not be subjected to exces- sive force. it may cause a malfunction or damage. 2. do not drop nor apply excessive force. it may cause a malfunction or damage. 3. tighten is1000-01 applying the spanner on the pt fitting part. 4. mounting direction is available in either horizontal or perpendicular. be sure to read before handling. refer to pages 16-14-3 and 16-14-4 for safety instructions and common precautions on the products mentioned in this catalog, and refer to pages 16-1-11 to 16-1-13 for precautions on every series. wiring pressure source
pressure switch with piping adapter specifications switch characteristics how to order fluid air proof pressure max. operating pressure set pressure range (off) differential 1.0mpa contact point structure 1a max. contact point capacity 2v ac/2w dc ac, 12v to 24v dc: 50ma ac, 48v dc: 40ma ac, 100v dc: 20ma voltage ac, dc max. operating current 12v, 24v, 48v, 100v 0.7mpa 0.1 to 0.4mpa 0.08mpa ambient and fluid temperature 5 to 60 c (no condensation) ac4000, ac4010, ac4020 ac4030, ac4040 aw4000, aw4050 (2) ac2500 , ac2520 , ac2530 ac3000 , ac3010 , ac3020 ac3030 , ac3040 aw3000 , aw3050 ac2000 , ac2010 , ac2020 ac2030 , ac2040 aw2000 port size applicable model a b c d is1000e-2 l 01y is1000e-2 l 02y is1000e-2 l 03y is1000e-3 l 02y is1000e-3 l 03y is1000e-3 l 04y is1000e-4 l 02y is1000e-4 l 03y is1000e-4 l 04y is1000e-4 l 06y 28 73 62 18.5 26 80 63 16.5 33 87 66 17.5 50 87 66 17.5 40 80 63 17.5 note1) l in the part number indicate a connecting thread. use nothing for rc(pt), n for npt and f for g(pf). note2) can not be mounted on "ac40 l 0-06" and "aw40 l 0-06". * with retainer, o ring and bolt. ** consult smc when mounting the pressure switch on "ac40 l 0-06" and "aw40 l 0-06". * for more information, refer to p.3.0-0. 3 03 yl is1000e options attachment piping adapter port size attachments for is1000e body size thread pressure switch with piping adapter x201 x202 x250 length of lead wire: 3m reverse mounting (left side mounting style) setting pressure range: 0.1 to 0.6mpa y yl yt n f without attachment with attachment with attachment and l type bracket with attachment and t type bracket pressure switch applicable model no. y type standard rc(pt) npt g(pf) for ac2000 for ac2500, ac3000 for ac4000-02 to 04 01 02 03 04 06 2 3 4 is1000e-201 to 203 is1000e-302 to 304 is1000e-402 to 406 y20e y30e y40e yl type with l type bracket y20le y30le y40le yt type with t type bracket y20te y30te y40te model (1 ) 1 / 8 1 / 4 3 / 4 1 / 4 3 / 8 1 / 2 3 / 8 1 / 4 1 / 2 3 / 8 1 / 8 1 / 4 3 / 8 1 / 2 3 / 4 jis symbol 1.1- 18 ** ac av au af ar ir vex aw amr awm awd itv vba ve vy g al attachments ac series 2/15/99 8:51 am page 18
1.1- 20 ** ac av au af ar ir vex aw amr awm awd itv vba ve vy g al attachments pressure switch: (s) specifications switch characteristics how to order fluid air proof pressure max. operating pressure set pressure range (off) differential 1.0mpa contact point structure 1a max. contact point capacity 2v ac/2w dc ac, 12v to 24v dc: 50ma ac, 48v dc: 40ma ac, 100v dc: 20ma voltage ac, dc max. operating current 12v, 24v, 48v, 100v 0.7mpa 0.1 to 0.4mpa 0.08mpa ambient and fluid temperature 5 to 60 c(no condensation) model applicable model a b c d e f * for more information, refer to smc pressure switch catalog. (catalog no.e824) 4 yt is1000m options attachment attachments for is1000m body size pressure switch x201 x202 length of lead wire: 3m set pressure range: 0.1 to 0.6mpa y yl yt without attachment with attachment with attachment and l type bracket with attachment and t type bracket pressure switch applicable model no. y type standard for ac2000 for ac2500, ac3000 for ac4000-02 to 04 for ac4000-06 for ac5000, ac6000 2 3 4 5 6 is1000m-2 is1000m-3 is1000m-4 is1000m-5 is1000m-6 y20m y30m y40m y50m y60m yl type with l type bracket y20lm y30lm y40lm y50lm y60lm yt type with t type bracket y20tm y30tm y40tm y50tm y60tm compact pressure switch can be mounted easily. makes it easier to detect pressure in lines. pressure switch is1000m-2y is1000m-3y is1000m-4y is1000m-5y is1000m-6y 15 15 15 15 15 73.5 82 88.7 91 100 62.6 64.9 67.6 68 72.5 23 23 23 23 23 28 29 35 44 54 10 11 14 14 15 ac2500, ac2520, ac2530 ac3000, ac3020, ac3030 ac5000, ac5500, ac6000 ac5020, ac5520, ac6020 ac4000-06, ac4020-06 ac4030-06 ac2000, ac2020, ac2030 ac4000, ac4020, ac4030 caution on assembling attachment for pressure switch can be installed at the in/out side of af, ar, al, afm and afd. mounting at the in/out side of aw and upward handle ofar is not possible. jis symbol ac series 2/15/99 8:51 am page 20
16 attachment specifications series ac how to order model is1000m-20 is1000m-30 is1000m-40 is1000m-50 is1000m-60 applicable model ac20 ac25 , ac30 ac40 ac40 -06 ac50 , ac55 , ac60 a 11 13 15 17 22 b 76 86 95 99 92.5 c 66 72 77 79 68.5 d 28 30 36 44 53 30 is1000m pressure switch pressure switch (s) a compact integrated pressure switch can be easily installed and facilitates the pressure detection of the line. pressure switch accessories x201 x202 x207 x215 lead wire length: 3m regulating pressure range: 0.1 to 0.6mpa mpa/psi dual scale lead wire length: 3m; regulating pressure range: 0.1 to 0.6mpa specifications switch characteristics fluid proof pressure maximum operating pressure set pressure range (off) differential ambient and fluid temperature air 1.0mpa 0.7mpa 0.1 to 0.4mpa 0.08mpa ? to 60 c (with no freezing) contact point configuration maximum contact point capacity operating voltage: ac, dc maximum operating current 1a 2va(ac), 2w(dc) 100v or less ac, dc12v to 24v: 50ma ac, dc48v: 40ma ac, dc100v: 20ma body size for ac20 for ac25, ac30 for ac40-02 to 04 for ac40-06 for ac50, ac55, ac60 20 30 40 50 60 note) separate interfaces are required for modular unit. d b c a 15 approx. 500 23 center of f.r.l. body jis symbol cross interface cross interface (c) m5 x 0.8, 1/8, 1/4, 3/8, 1/2 pipings are possible in all 4 directions. in/out ports are not machined for threads. contact smc if threaded (machined) ports are required. model y14-m5 y24- 01 y24- 02 y34- 01 y34- 02 y44- 02 y44- 03 y54- 03 y54- 04 port size m5 1/8 1/4 1/8 1/4 1/4 3/8 3/8 1/2 applicable model ac10 ac20 ac25 , ac30 ac40 ac40 -06 e: 4-rc f: without thread a 23 40 49 60 72 b 16 40 43 48 62 c 14 22 28 36 40 d 25 40 48 54 62 ?when mounting a cross interface directly on the in side of the lubricator, be sure to use a series akm check valve between the lubricator and cross interface. ?factory mounting of a cross interface on the ac model is available as a special order. cautions in mounting b c a d e e e e port size center of f.r.l. body f f notes) ? in the model numbers indicates a thread type. no indication is necessary for rc; however, indicate n for npt, and f for g. ?if threaded ports are required, they are available as a special order. contact smc. this product is for overseas use only according to the new measurement law. (the si unit type is provided for use in japan.)
14 specifications switch characteristics how to order fluid proof pressure maximum operating pressure set pressure range (when off) differential ambient and fluid temperature air 1.0mpa 0.7mpa 0.1 to 0.4mpa 0.08mpa ? to 60 c (with no freezing) contact point configuration maximum contact point capacity operating voltage: ac, dc max. operating current 1a 2va(ac), 2w(dc) 100v or less 12v to 24v ac, dc: 50ma 48v ac, dc: 40ma 100v ac, dc: 20ma model note 1) is1000e-20 01 is1000e-20 02 is1000e-20 03 is1000e-30 02 is1000e-30 03 is1000e-30 04 is1000e-40 02 is1000e-40 03 is1000e-40 04 is1000e-40 06 port size 1/8 1/4 3/8 1/4 3/8 1/2 1/4 3/8 1/2 3/4 applicable model ac20 ar20 , aw20 awm20, awd20 ac25 , ac30 ar25 , ar30 , aw30 awm30, awd30 ac40 ar40 , aw40 awm40, awd40 a 30 32 32 b 68 74.5 80.5 c 57 60.5 62.5 d 28 30 37 e 16 13 12.5 30 03 is1000e option piping adapter port size body size thread type x201 x202 x207 x215 x250 x251 x252 x253 lead wire length: 3m regulating pressure range: 0.1 to 0.6mpa mpa/psi dual scale lead wire length: 3m; regulating pressure range: 0.1 to 0.6mpa opposite-side mounting (left-side mounting type) lead wire length: 3m; opposite-side mounting (left-side mounting type) set pressure range: 0.1 to 0.6mpa; opposite-side mounting (left-side mounting type) lead wire length: 3m; regulating pressure range: 0.1 to 0.6mpa; opposite-side mounting (left-side mounting type) nil n f rc npt g for ac20 for ac25, ac30 for ac40-02 to 04 20 30 40 pressure switch with piping adapter (p) jis symbol pressure switch with piping adapter d approx. 500 b c a e 23 center of f.r.l. body port size attachment specifications series ac pressure switch with piping adapter note 1) in the model numbers indicates a thread type. no indication is necessary for rc; however, indicate n for npt, and f for g. note 2) a pressure switch cannot be mounted on ac40 -06 and aw40 -06. ? separate interfaces are required for modular unit. ?? the pressure switch on ac40 -06 and above and aw40 -06 can be mounted by screwing is1000-01 into the piping adapter e500- 06-x501 or e600- 06-x501 to e600- 06 to 10-x501 (with top-face thread rc 1/8). products with a premounted switch are available as a special order. please contact smc regarding their availability. symbol 01 02 03 04 06 port size 1/8 1/4 3/8 1/2 3/4 20 30 40 body size note 2) this product is for overseas use only according to the new measurement law. (the si unit type is provided for use in japan.)
86 attachments & accessories modular air components ledom trop ezis a b c d e ledomelbacilppa y10n2-e0001sin 8/1 01.1 )82( 78.2 )37( 44.2 )26( 37. )5.81( 01.1 )82( 0102can 0002can 0202can 0402can 0302can 0002wan y20n2-e0001sin 4/1 y30n2-e0001sin 8/3 y20n3-e0001sin 4/1 20.1 )62( 51.3 )08( 84.2 )36( 56. )5.61( 01.1 )82( 0252can 0052can 0352can y30n3-e0001sin 8/3 0103can 0003can 0303can 0203can y40n3-e0001sin 2/1 20.1 )04( 51.3 )08( 84.2 )36( 56. )5.71( 01.1 )82( 0403can 0003wan y20n4-e0001sin 4/1 03.1 )33( 34.3 )78( 06.2 )66( 56. )5.71( 41.1 )92( 0104can 0004can 0204can 0404can 0304can 0004wan y30n4-e0001sin 8/3 83.1 )53( y40n4-e0001sin 2/1 37.1 )44( y60n4-e0001sin 4/3 79.1 )05( 34.3 )78( 06.2 )66( 56. )5.71( 31.2 )45( pressure switch with piping adaptor scitsiretcarahc noitautcafoepy t) .o.n(a1 yticapachctiw sw 2cd av2ca )cd,ca(egatlovgnitarep ov 001,v84,v42,v21 tnerrucgnitarepo.xam am05:v42~v21cd,ca am04:v84cd,ca am02:v001cd,ca emitesnopse rs m2.1 3 03 yl nis1000e option x201 x202 x250 length of lead wire:3m set pressure range 15~85 psi (0.1 to 0.6mpa) reverse mounting (left side mounting) attachment y yl yt without attachment with attachment with attachment & l type bracket with attachment & t type bracket piping adapter port size pressure switch with piping adapter 2 3 4 nac2000 nac2500, nac3000 nac4000-02 ~ 04 body size thread attachments for is1000 parts no. applying pressure switch y type standard yl type with l type bracket nis1000e-n01 ~ n03 nis1000e-n02 ~ n04 nis1000e-n02 ~ n06 y20e y30e y40e y20le y30le y40le yt type with t type bracket y20te y30te y40te n f rc(pt) npt g(pf) 01 02 03 04 06 8 1 4 1 8 3 2 1 4 3 how to order snoitacificeps diul fr ia erusserpfoor p) apm0.1(gisp541 erusserpgnitarepo.xa m) apm7.0(gisp001 )ffo(egnargnitte s) apm4.0~1.0(gisp06~51 erusserplaitnereffi d) apm80.0(gisp21nahtssel erutarepmetdiulfdnatneibm a) c 06~ 5(f 041~04 ? ? re turn to m enu
85 modular air components attachments & accessories nac2000 nac2500, nac3000 nac4000-02 to 04 nac4000-n06 nac5000, nac6000 caution on assembling the pressure switch can be mounted on both in and out sides on naf, nar, nal, nafm and nafd but cannot be mounted in this way on nvhs, naw, or when the handle of nar faces upwards. pressure switch snoitacificeps diul fr ia erusserpfoor p) apm0.1(gisp541 erusserpgnitarepo.xa m) apm7.0(gisp001 )ffo(egnargnitte s) apm4.0~1.0(gisp06~51 erusserplaitnereffi d) apm80.0(gisp21nahtssel erutarepmetdiulfdnatneibm a) c 06~ 5(f 041~04 scitsiretcarahc noitautcafoepy t) .o.n(a1 yticapachctiw sw 2cd av2ca )cd,ca(egatlovgnitarep ov 001,v84,v42,v21 tnerrucgnitarepo.xam am05:v42~v21cd,ca am04:v84cd,ca am02:v001cd,ca emitesnopse rs m2.1 ledom a b c d e f ledomelbacilppa y2-m0001sin 95. )51( 98.2 )5.37( 64.2 )6.26( 19. )32( 01.1 )82( 93. )01( 0302can 0202can 0002can y3-m0001sin 95. )51( 32.3 )28( 65.2 )9.46( 19. )32( 41.1 )92( 34. )11( 0352can 0252can 0052can 0303can 0203can 0003can y4-m0001sin 95. )51( 94.3 )7.88( 66.2 )6.76( 19. )32( 83.1 )53( 55. )41( 0304can 0204can 0004can y5-m0001sin 95. )51( 85.3 )19( 86.2 )86( 19. )32( 37.1 )44( 55. )41( 60n-0204can 60n-0004can 60n-0304can y6-m0001sin 95. )51( 49.3 )001( 58.2 )5.27( 19. )32( 31.2 )45( 95. )51( 0006can 0055can 0005can 0206can 0255can 0205can pressure switch 4 yt nis1000m option length of lead wire:3m set pressure range 15~85 psi (0.1 to 0.6mpa) attachment y yl yt without attachment with attachment with attachment and l type bracket with attachment and t type bracket pressure switch 2 3 4 5 6 body size how to order x201 x202 attachments for is1000 part no. applying to pressure switch y type standard yl type with l type bracket yt type with t type bracket y20m y30m y40m y50m y60m y20lm y30lm y40lm y50lm y60lm y20tm y30tm y40tm y50tm y60tm nis1000m-2 nis1000m-3 nis1000m-4 nis1000m-5 nis1000m-6 re turn to m enu
safety instructions these safety instructions are intended to prevent a hazardous situation and/or equipment damage. these instructions indicate the level of potential hazard by labels of "caution", "warning" or "danger" . to ensure safety, be sure to observe iso 4414 note 1) , jis b 8370 note 2) and other safety practices. 1. the compatibility of pneumatic equipment is the responsibility of the person who designs the pneumatic system or decides its specifications. since the products specified here are used in various operating conditions, their compatibility for the specific pneumatic system must be based on specifications or after analysis and/or tests to meet your specific requirements. the expected performance and safety assurance will be the responsibility of the person who has determined the compatibility of the system. this person should continuously review the suitability of all items specified, referring to the latest catalog information with a view to giving due consideration to any possibility of equipment failure when configuring a system. 2. only trained personnel should operate pneumatically operated machinery and equipment. compressed air can be dangerous if an operator is unfamiliar with it. assembly, handling or repair of pneumatic systems should be performed by trained and experienced operators. 3. do not service machinery/equipment or attempt to remove components until safety is confirmed. 1. inspection and maintenance of machinery/equipment should only be performed once measures to prevent falling or runaway of the driver objects have been confirmed. 2. when equipment is to be removed, confirm the safety process as mentioned above. cut the supply pressure for this equipment and exhaust all residual compressed air in the system. 3. before machinery/equipment is restarted, take measures to prevent shooting-out of cylinder piston rod, etc. 4. contact smc if the product is to be used in any of the following conditions: 1. conditions and environments beyond the given specifications, or if product is used outdoors. 2. installation on equipment in conjunction with atomic energy, railway, air navigation, vehicles, medical equipment, food and beverages, recreation equipment, emergency stop circuits, clutch and brake circuits in press applications, or safety equipment. 3. an application which has the possibility of having negative effects on people, property, or animals, requiring special safety analysis. note 1) iso 4414: pneumatic fluid power--general rules relating to systems. note 2) jis b 8370: general rules for pneumatic equipment warning caution : operator error could result in injury or equipment damage. w arning : operator error could result in serious injury or loss of life. danger : in extreme conditions, there is a possible result of serious injury or loss of life. 16-14-3
1. confirm the specifications. products represented in this catalog are designed for use in compressed air appllications only (including vacuum), unless otherwise indicated. do not use the product outside their design parameters. please contact smc when using the products in applications other than compressed air (including vacuum). 4. use clean air if the compressed air supply is contaminated with chemicals, cynthetic materials, corrosive gas, etc., it may lead to break down or malfunction. selection mounting piping air supply maintenance operating environment w arning 1. instruction manual install the products and operate them only after reading the instruction manual carefully and understanding its contents. also keep the manual where it can be referred to as necessary. 2. securing the space for maintenance when installing the products, please allow access for maintenance. 3. tightening torque when installing the products, please follow the listed torque specifications. w arning 1. do not use in environments where the product is directly exposed to corrosive gases, c hemicals, salt water, water or steam. 2. do not expose the product to direct sunlight f or an extended period of time. 3. do not use in a place subject to heavy vibrations and/or shocks. 4. do not mount the product in locations where it is exposed to radiant heat. w arning 1. maintenance procedures are outlined in the operation manual. not following proper procedures could cause the product to malfunction and could lead to damage to the equipment or machine. 2. maintenance work if handled improperly, compressed air can be dangerous. assembly, handling and repair of pneumatic systems should be performed by qualified personnel only. 3. drain flushing remove drainage from air filters regularly. (refer to the specifications.) 4. shut-down before maintenance before attempting any kind of maintenance make sure the supply pressure is shut of and all residual air pressure is released from the system to be worked on. 5. start-up after maintenance and inspection apply operating pressure and power to the equipment and check for proper operation and possible air leaks. if operation is abnormal, please verify product set-up parameters. 6. do not make any modifications to be product. do not take the product apart. w arning 1. before piping make sure that all debris, cutting oil, dust, etc, are removed from the piping. 2. wrapping of pipe tape when screwing piping or fittings into ports, ensure that chips from the pipe threads or sealing material do not get inside the piping. also, when the pipe tape is used, leave 1.5 to 2 thread r idges exposed at the end of the threads. caution 1. operating fluid please consult with smc when using the product in applications other than compressed air (including vacuum). regarding products for general fluid, please ask smc about applicable fluids. 2. install an air dryer, aftercooler, etc. excessive condensate in a compressed air system may cause v alves and other pneumatic equipment to malfunction. installation of an air dryer, after cooler etc. is recommended. 3. drain flushing if condensate in the drain bowl is not emptied on a regular basis, the bowl will over flow and allow the condensate to enter the compressed air lines. if the drain bowl is difficult to check and remove, it is recommended that a drain bowl with the auto-drain option be installed. f or compressed air quality, refer to ?ir preparation equipment catalog. w arning common precautions be sure to read before handling. for detailed precautions on every series, refer to main text. 16-14-4
quality assurance information (iso 9001, iso 14001) reliable quality of products in the global market to enable our customers throughout the world to use our products with ev en greater confidence, smc has obtained certification for international standards ?so 9001 and ?so 14001? and created a complete structure for quality assurance and environmental controls. smc products pursue to meet its customers expectations while also considering companys contribution in society. this is an international standard for quality control and quality assurance. smc has obtained a large nu mber of certifications in japan and overseas, providing assurance to our customers throughout the world. quality management system iso 9001 this is an international standard related to environmental management systems and environmental inspections. while promoting environmentally friendly automation technology, smc is also making diligent efforts to preserve the environment. environmental management system iso 14001 sales coordination production make customers our first priority, offering them reliable and friendly service. market research product planning after service process control inspection, testing, etc. initial production control quality system education t raining of suppliers new product evaluation reliability design reliability testing new technical development education t raining research design development produce the highest quality with the participation of all employees. create new products using the latest technology, and offer the finest products in a timely manner. smcs quality control system quality policies quality control activities 16-14-5
ce mark smc product conforming to inter smc products complying with en/iso, csa/ul standards are supporting the ce mark indicates that machines and components meet essential requirements of all the ec directives applied. it has been obligatory to apply ce marks indicating conformity with ec directives when machines and components are exported to the member nations of the eu. once ? manufacturer himself?declares a product to be safe by means of ce marking (declaration of conformity by manufacturer), free distribution inside the member nations of the eu is permissible. ce mark smc provides ce marking to products to which emc and low voltage directives have been applied, in accordance with cetop (european hydraulics and pneumatics committee) guide lines. as of february 1998, the following 18 countries will be obliged to conform to ce mark legislation iceland, ireland, united kingdom, italy, austria, netherlands, greece, liechtenstein, sweden, spain, denmark, germany, norway, finland, france, belgium, portugal, luxembourg ec directives and pneumatic components ?machinery directive the machinery directive contains essential health and safety requirements for machinery, as applied to industrial machines e.g. machine tools, injection molding machines and automatic machines. pneumatic equipment is not specified in machinery directive. however, the use of smc products that are certified as conforming to en standards, allows customers to simplify preparation work of the technical construction file required for a declaration of conformity. electromagnetic compatibility (emc) directive the emc directive specifies electromagnetic compatibility. equipment which may generate electromagnetic interference or whose function may be compromised by electromagnetic interference is required to be immune to electromagnetic affects (ems/immunity) without emitting excessive electromagnetic affects (emi/emission). ?low voltage directive this directive is applied to products, which operate above 50 vac to 1000 vac and 75 vdc to 1500 vdc operating voltage, and require electrical safety measures to be introduced. ?simple pressure vessels directive this directive is applied to welded vessels whose maximum operating pressure (ps) and volume of vessel (v) exceed 50 bar/l. such vessels require ec type examination and then ce marking. 16-14-6
http://www.smcworld.com you to comply with ec directives and csa/ul standards. csa standards & ul standards ul and csa standards have been applied in north america (u.s.a. and canada) symbolizing safety of electric products, and are defined to mainly prevent danger from electric shock or fire, resulting from trouble with electric products. both ul and csa standards are acknowledged in north america as the first class certifying body. they have a long experience and ability for issuing product safety certificate. products approved by csa or ul standards are accepted in most states and governments beyond question. since csa is a test certifying body as the national recognized testing laboratory (nrtl) within the jurisdiction of occupational safety and health administration (osha), smc was tested for compliance with csa standards and ul standards at the same time and was approved for compliance with the two standards. the above csa nrtl/c logo is described on a product label in order to indicate that the product is approved by csa and ul standards. tssa (mccr) registration products tssa is the regulation in ontario state, canada. the products that the operating pressure is more than 5 psi (0.03 mpa) and the piping size is bigger than 1 inch. fall into the scope of tssa regulation. products conforming to ce standard with ce symbol for simple visual recognition in this catalog each accredited product series is indicated with a ce mark symbol. however, in some cases, every available models may not meet ce compliance. please visit our web site for the latest selection of available models with ce mark. mark of compliance for csa mark of compliance for csa/ul national standards 16-14-7 smc product conforming to international standards
america europe u.s.a. smc corporation of america 3011 north franklin road indianapolis, in 46226, u.s.a. tel: 317-899-4440 fax: 317-899-3102 canada smc pneumatics (canada) ltd. 6768 financial drive mississauga, ontario, l5n 7j6 canada tel: 905-812-0400 fax: 905-812-8686 mexico smc corporation (mexico), s.a. de c.v. carr. silao-trejo k.m. 2.5 s/n, predio san jose del duranzo c.p. 36100, silao, gto., mexico tel: 472-72-2-55-00 fax: 472-72-2-59-44/2-59-46 chile smc pneumatics (chile) s.a. av. la monta?a 1,115 km. 16,5 p. norte parque industrial valle grande, lampa santiago, chile tel: 02-270-8600 fax: 02-270-8601 argentina smc argentina s.a. teodoro garcia 3860 (1427) buenos aires, argentina tel: 011-4555-5762 fax: 011-4555-5762 bolivia smc pneumatics bolivia s.r.l. avenida beni numero 4665 santa cruz de la sierra-casilla de correo 2281, bolivia tel: 591-3-3428383 fax: 591-3-3449900 venezuela smc neumatica venezuela s.a. apartado 40152, avenida nueva granada, edificio wanlac, local 5, caracas 1040-a, venezuela tel: 2-632-1310 fax: 2-632-3871 peru (distributor) impeco automatizacion industrial s.a. av. canevaro 752, lince, lima, peru tel: 1-471-6002 fax: 1-471-0935 uruguay (distributor) bako s.a. galicia 1650 esq. gaboto c.p. 11200, montevideo, uruguay tel: 2-401-6603 fax: 2-409-4306 brazil smc pneumaticos do brasil ltda. rua. dra. maria fidelis, nr. 130, jardim piraporinha-diadema-s.p. cep: 09950-350, brasil tel: 11-4051-1177 fax: 11-4071-6636 colombia (distributor) airmatic ltda. calle 18 69-05 apart. aereo 081045 santa fe de bogot?, colombia tel: 1-424-9240 fax: 1-424-9260 u.k. smc pneumatics (u.k.) ltd. vincent avenue, crownhill, milton keynes, mk8 0an, backinghamshire, u.k. tel: 01908-563888 fax: 01908-561185 germany smc pneumatik gmbh boschring 13-15 d-63329 egelsbach, germany tel: 06103-4020 fax: 06103-402139 italy smc italia s.p.a. via garibaldi 62 i-20061 carugate milano, italy tel: 02-9271365 fax: 02-9271365 france smc pneumatique s.a. 1 boulevard de strasbourg, parc gustave eiffel, bussy saint georges, f-77600 marne la vallee cedex 3 france tel: 01-64-76-10-00 fax: 01-64-76-10-10 sweden smc pneumatics sweden ab ekhagsv?gen 29-31, s-141 05 huddinge, sweden tel: 08-603-07-00 fax: 08-603-07-10 switzerland smc pneumatik ag dorfstrasse 7, postfach 117, ch-8484 weisslingen, switzerland tel: 052-396-3131 fax: 052-396-3191 austria smc pneumatik gmbh (austria) girakstrasse 8, a-2100 korneuburg, austria tel: 0-2262-6228-0 fax: 0-2262-62285 spain smc espa?a, s.a. zuazobidea 14 pol. ind. j?ndiz 01015 vitoria, spain tel: 945-184-100 fax: 945-184-510 ireland smc pneumatics (ireland) ltd. 2002 citywest business campus, naas road, saggart, co. dublin, ireland tel: 01-403-9000 fax: 01-466-0385 netherlands (associated company) smc pneumatics bv de ruyterkade 120, nl-1011 ab amsterdam, netherlands tel: 020-5318888 fax: 020-5318880 greece (distributor) s.parianopoulos s.a. 7, konstantinoupoleos street 11855 athens, greece tel: 01-3426076 fax: 01-3455578 denmark smc pneumatik a/s knudsminde 4 b dk-8300 odder, denmark tel: 70252900 fax: 70252901 smc? global service network 16-14-20
europe finland smc pneumatics finland oy pl72, tiistinniityntie 4, sf-02231 esp00, finland tel: 09-8595-80 fax: 09-8595-8595 norway smc pneumatics norway a/s vollsveien 13c, granfoss n?ingspark n-1366 lysaker, norway tel: 67-12-90-20 fax: 67-12-90-21 belgium (distributor) smc pneumatics n.v./s.a. nijverheidsstraat 20 b-2160 wommelgem belguim tel: 03-355-1464 fax: 03-355-1466 poland smc industrial automation polska sp.z.o.o. ul. konstruktorska 11a, pl-02-673 warszawa, poland tel: 022-548-5085 fax: 022-548-5087 turkey (distributor) entek pn?matik san.ve tic. ltd. sti perpa tic. merkezi kat:11 no.1625 80270 okmeydani istanbul, t?rkiye tel: 0212-221-1512 fax: 0212-221-1519 russia smc pneumatik llc. 36/40 sredny prospect v.o. st. petersburg 199004, russia tel: 812-118-5445 fax: 812-118-5449 czech smc industrial automation cz s.r.o. hudcova 78a, cz-61200 brno, czech republic tel: 05-4121-8034 fax: 05-4121-8034 hungary smc hungary ipari automatiz?l?si kft. budafoki ut 107-113 1117 budapest tel: 01-371-1343 fax: 01-371-1344 romania smc romania s.r.l. str. frunzei, nr. 29, sector 2, bucharest, romania tel: 01-3205111 fax: 01-3261489 slovakia smc priemyseln? automatiz?ci?, s.r.o nova 3, sk-83103 bratislava tel: 02-4445-6725 fax: 02-4445-6028 slovenia smc industrijska avtomatilca d.o.o. grajski trg 15, slo- 8360 zuzemberk, slovenia tel: 07388-5240 fax: 07388-5249 south africa (distributor) hyflo southern africa (pty.) ltd. p.o.box 240 paardeneiland 7420 south africa tel: 021-511-7021 fax: 021-511-4456 egypt (distributor) saadani trading & ind. services 15 sebaai street, miami 21411 alexandria, egypt tel: 3-548-50-34 fax: 3-548-50-34 oceania/asia australia smc pneumatics (australia) pty.ltd. 14-18 hudson avenue castle hill nsw 2154, australia tel: 02-9354-8222 fax: 02-9894-5719 new zealand smc pneumatics (new zealand) ltd. 8c sylvia park road mt.wellington auckland, new zealand tel: 09-573-7007 fax: 09-573-7002 taiwan smc pneumatics (taiwan) co.,ltd. 17, lane 205, nansan rd., sec.2, luzhu-hsiang, taoyuan-hsien, taiwan tel: 03-322-3443 fax: 03-322-3387 hong kong smc pneumatics (hong kong) ltd. 29/f, clifford centre, 778-784 cheung, sha wan road, lai chi kok, kowloon, hong kong tel: 2744-0121 fax: 2785-1314 singapore smc pneumatics (s.e.a.) pte. ltd. 89 tuas avenue 1, jurong singapore 639520 tel: 6861-0888 fax: 6861-1889 philippines shoketsu smc corporation unit 201 common goal tower, madrigal business park, ayala alabang muntinlupa, philippines tel: 02-8090565 fax: 02-8090586 malaysia smc pneumatics (s.e.a.) sdn. bhd. lot 36 jalan delima1/1, subang hi-tech industrial park, batu 3 40000 shah alam selangor, malaysia tel: 03-56350590 fax: 03-56350602 south korea smc pneumatics korea co., ltd. woolim e-biz center (room 1008), 170-5, guro-dong, guro-gu, seoul, 152-050, south korea tel: 02-3219-0700 fax: 02-3219-0702 china smc (china) co., ltd. 7 wan yuan st. beijing economic & technological development zone 100176, china tel: 010-67882111 fax: 010-67881837 thailand smc thailand ltd. 134/6 moo 5, tiwanon road, bangkadi, amphur muang, patumthani 12000, thailand tel: 02-963-7099 fax: 02-501-2937 india smc pneumatics (india) pvt. ltd. d-107 to 112, phase-2, extension, noida, dist. gautaim budh nagar, u.p. 201 305, india tel: (0120)-4568730 fax: 0120-4568933 indonesia (distributor) p.t. riyadi putera makmur jalan hayam wuruk komplek glodok jaya no. 27-28 jakarta 11180 indonesia tel: 021-625 5548 fax: 021-625 5888 pakistan (distributor) jubilee corporation first floor mercantile centre, newton road near boulton market p.o. box 6165 karachi 74000 pakistan tel: 021-243-9070/8449 fax: 021-241-4589 israel (distributor) baccara automation control kvutzat geva 18915 israel tel: 04-653-5960 fax: 04-653-1445 saudi arabia (distributor) assaggaff trading est. p.o. box 3385 al-amir majed street, jeddah-21471, saudi arabia tel: 02-6761574 fax: 02-6708173 16-14-21 smcs global service network

▲Up To Search▲

Price & Availability of IS1000E-403

	To Download IS1000E-403 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .