View KV29AL40C_7796871.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 kv-29al40/kv-29al40a/kv-29al40c trinitron ? color tv model commander dest . chassis no . kv -29al40 rm-y165 e scc-s06j-a k v -29al40 a rm-y16 5 e scc-s06h-a kv -29al40c rm-y165 e scc-s06k-a kv-29al40 service manual chassis ba-4 rm-y165 free datasheet http://www.datasheet-pdf.com/
2 kv-29al40/kv-29al40a/kv-29al40c specifications television system american tv standard (all models except kv-29al40a) pal-m, pal-l, ntsc (kv-29al40a only) channel coverage vhf:2-13/uhf:14-69/catv:1-125 visible screen size 29-inch picture measured actual screen size 29-inch picture measured antenna 75 ohm external terminal for vhf/uhf supplied accessories remote commander (including 2 size aa (r6) batteries) rm-y165 optional accessory connecting cables: vmc-810s/820s, vmc-720m, yc-15v/30v tv stand su-27a3 vhf, uhf mixer eac-66 design and specifications are subject to change without notice. 1) 1 vp-p 75 ohms unbalanced, sync negative 2) y: 1 vp-p 75 ohms unbalanced, sync negative c: 0.286 vp-p (burst signal), 75 ohms 3) 500 mvrms (100% modulation), impedance: 47 kilohms 4) more than 408 mvrms at the maximum volume setting (variable) kv29al40a kv29al40 kv-29al40c power requirements 120v,60hz 220v, 50/60hz number of inputs/outputs: video 1) 22 s video 2) CC audio 3) 22 audio out 4) 11 monitor out C C speaker output (w) 10w x 2 10w x 2 power consumption (w): in use (max.) 170w 170w in standby 2w 3w dimensions (w/h/d): (mm) 660.4 x 598 660.4 x 598 x 505.5mm x 505.5mm (in.) 26 x 23 1/2 26 x 23 1/2 x 20in x 20in mass: (kg.) 42kg 42kg (lbs.) 92 lbs. 8 oz. 92 lbs. 8 oz ( l ) srs (sound retrieval system) the ( l ) srs (sound retrieval system) is manu- factured by sony corporation under license from srs labs, inc. it is covered by u.s. patent no. 4,748,669. other u.s. and foreign patents pending. the word srs and the srs symbol ( l ) are registered trademarks of srs labs, inc. bbe and bbe symbol are trademarks of bbe sound, inc. and are licensed by bbe sound, inc. under u.s. patent no. 4,638,258 and 4,482,866. free datasheet http://www.datasheet-pdf.com/
3 kv-29al40/kv-29al40a/kv-29al40c warnings and caution ............................................................ 4 self-diagnostic function ........................................................ 4 safety check out instructions ................................................ 7 1. general (in spanish) connecting and installing the tv ....................................... 8 using the remote control .................................................. 8 programming the channels ................................................ 9 watching the tv ................................................................. 9 other functions .................................................................. 9 using the audio menu ..................................................... 11 troubleshooting ................................................................ 11 2. disassembly 2-1. rear cover removal ................................................. 12 2-2. control switch removal ........................................... 12 2-3. chassis assembly removal ....................................... 12 2-4. service position ......................................................... 12 2-5. picture tube removal ............................................... 13 3. set-up adjustments 3-1. beam landing ........................................................... 14 3-2. convergence .............................................................. 15 3-3. focus ......................................................................... 16 3-4. screen (g2) ................................................................ 16 3-5. method of setting the service adjustment mode ..... 16 3-6. white balance adjustments ...................................... 16 table of contents section title page section title page 4. safety related adjustments ......................... 17 5. circuit adjustments 5-1. electrical adjustment by remote commander ......... 19 5-2. a board adjustments ................................................. 22 6. diagrams 6-1. block diagrams ......................................................... 25 6-2. circuit boards location ............................................ 28 6-3. printed wiring boards and schematic diagrams ...... 28 ? a board ...................................................................... 29 ? cv board ................................................................... 37 ? k board ..................................................................... 38 ? e board ...................................................................... 40 ? ht board ................................................................... 40 ? hv board ................................................................... 41 ? hz board ................................................................... 42 6-4. semiconductors ......................................................... 43 7. exploded vlews 7-1. chassis ....................................................................... 44 7-2. main power switch ................................................... 45 (kv-29al40a only) 8. electrical parts list ........................................ 46 free datasheet http://www.datasheet-pdf.com/
4 kv-29al40/kv-29al40a/kv-29al40c warnings and cautions self-diagnostic function the units in this manual contain a self-diagnostic function. if an error occurs, the standby/timer lamp will automatically begi n to flash. the number of times the lamp flashes translates to a probable source of the problem. a definition of the standby/timer l amp flash indicators is listed in the instruction manual for the user's knowledge and reference. if an error symptom cannot be repr oduced, the remote commander can be used to review the failure occurrence data stored in memory to reveal past problems and how often these problems occur. 1. diagnostic test indicators when an error occurs, the standby/timer lamp will flash a set number of times to indicate the possible cause of the problem. if there is more than one error, the lamp will identify the first of the problem areas. results for all of the following diagnostic items are displayed on screen. no error has occurred if the screen displays a "0". diagnostic item no. of times self-diagnostic display/ probable cause detected symptoms description standby/times diagnostic result location lamp flashes ? power does not turn on does not light ? power cord is not plugged in. ? power does not come on. ? fuse is burned out (f5050). (e board) ? no power is supplied to the tv. ? ac power supply is faulty. ? +b overcurrent (ocp) 2 times 2:0 or 2:1 ? h.out (q502) is shorted. (a board) ? power does not come on. ? ic1701, q946, q947 is shorted. (c board) ? load on power line is shorted. ? vertical deflection stopped 4 times 4:0 or 4:1 ? +13v is not supplied. (a board) ? has entered standby state after ? ic 541 is faulty (a board) horizontal raster. ? vertical deflection pulse is stopped. ? power line is shorted or power supply is stopped. ? white balance failure 5 times 5:0 or 5:1 ? video out (q306, q307, q308) is ? no raster is generated. (not balanced) faulty. (a board) ? crt cathode current detection ? ic301 is faulty. (a board) ? g2 is improperly adjusted. (note 2) note 1: if a +b overcurrent is detected, stoppage of the vertical deflection is detected simultaneously. the symptom that is diagnosed first by the microcontroller is displayed on the screen. note 2: refer to screen (g2) adjustment in section 3-4 of this manual . a ttention apres avoir deconnecte le cap de l'anode, court-circuiter l'anode du tube cathodique et celui de l'anode du cap au chassis metallique de l'appareil, ou au couche de carbone peinte sur le tube cathodique ou au blindage du tube cathodique. attention!! afin d'eviter tout resque d'electrocution provenant d'un chssis sous tension, un transformateur d'isolement doit etre utilis lors de tout dpannage. le chssis de ce rcepteur est directement raccord l'alimentation secteur. a ttention a ux composants rela tifs a la securite!! les composants identifies par une trame et par une marque sur les schemas de principe, les vues explosees et les listes de pieces sont d'uneimportance critique pour la securite du fonctionnement. ne les remplacer que par des composants sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par sony. les reglages de circuit dont l'importance est critique pour la securite du fonctionnement sont identifies dans le present manuel. suivre ces procedures lors de chaque remplacement de composants critiques, ou lorsqu'un mauvais fontionnement suspecte. ! caution! short circuit the anode of the picture tube and the anode cap to the metal chassis, crt shield, or carbon painted on the crt, after removing the anode. warning!! an isolation transformer should be used during any service to avoid possible shock hazard, because of live chassis.the chassis of this receiver is directly connected to the ac power line. safety-related component warning!! components identified by shading and mark on the schematic diagrams, exploded views and in the parts list are critical for safe operation. replace these components with sony parts whose part numbers appear as shown in this manual or in supplements published by sony. circuit adjustments that are critical for safe operation are identified in this manual. follow these procedures whenever critical components are replaced or improper operation is suspected. ! free datasheet http://www.datasheet-pdf.com/
5 kv-29al40/kv-29al40a/kv-29al40c 2. display of standby/timer light flash count diagnostic item flash count* +b overcurrent 2 times vertical deflection stopped 4 times white balance failure 5 times * one flash count is not used for self-diagnostic. 3. stopping the standby/timer flash turn off the power switch on the tv main unit or unplug the power cord from the outlet to stop the standby/timer lamp from flas hing. 4. self-diagnostic screen display for errors with symptoms such as "power sometimes shuts off" or "screen sometimes goes out" that cannot be confirmed, it is pos sible to bring up past occurrences of failure for confirmation on the screen: [to bring up screen test] in standby mode, press buttons on the remote commander sequentially in rapid succession as shown below: screen display / channel 5 / sound volume C / power on note that this differs from entering the service mode (sound volume + ). self-diagnostic screen display: 5. handling of self-diagnostic screen display since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen dur ing repairs. when you have completed the repairs, clear the result display to "0". unless the result display is cleared to "0", the self-diagnostic function will not be able to detect subsequent faults after co mpletion of the repairs. [clearing the result display] to clear the result display to "0", press buttons on the remote commander sequentially as shown below when the diagnostic scree n is being displayed. channel 8 / enter [quitting self-diagnostic screen] to quit the entire self-diagnostic screen, turn off the power switch on the remote commander or the main unit. self diagnostic 2: 0 <------------- numeral "0" means that no fault has been detected. 3: n/a 0 4: 0 5: 1 <------------- numeral "1" means a fault has been detected one time only. 101: n/a 0 lamp on 0.3 sec. lamp off 0.3 sec. lamp off 3 sec. 2 times 4 times 5 times standby/sleep lamp free datasheet http://www.datasheet-pdf.com/
6 kv-29al40/kv-29al40a/kv-29al40c 6. self-diagnostic circuit +b overcurrent (ocp) occurs when an overcurrent on the +b(115v) line is detected by pin 18 of ic301. if the voltage to pin 18 of ic301 is less than 1v when v.sync is more than seven verticals in a period, the unit will automatically turn off. vertical deflection stopped occurs when an absence of the vertical deflection pulse is detected by pin 17 of ic001. power supply will shut down when waveform interval exceeds 2 seconds. white balance failure if the rgb levels* do not balance within 2 seconds after the power is turned on, this error will be detected by ic301. tv will stay on, but there will be no picture. *(refers to the rgb levels of the akb detection ref pulse that detects ik.) ik in hp/protect from crt from ic521 pin 7 i-prot o-led ic001 system ic301 y/chroma jungle ref ic541 v.out ic003 memory b-dat io-bdat sdat sda 21 18 35 3 17 37 18 21 5 free datasheet http://www.datasheet-pdf.com/
7 kv-29al40/kv-29al40a/kv-29al40c fig. b. checking for earth ground. safety check-out after corre cting the original service problem, perform the following safety checks before releasing the set to the customer: 1. check the area of your repair for unsoldered or poorly- soldered connections. check the entire board surface for solder splashes and bridges. 2. check the interboard wiring to ensure that no wires are pinched or contact high-wattage resistors. 3. check that all control knobs, shields, covers, ground straps, and mounting hardware have been replaced. be absolutely certain that you have replaced all the insulators. 4. look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. point them out to the customer and recommend their replacement. 5. look for parts which, though functioning, show obvious signs of deterioration. point them out to the customer and recommend their replacement. 6. check the line cords for cracks and abrasion. recommend the replacement of any such line cord to the customer. 7. check the b+ and hv to see if they are specified values. make sure your instruments are accurate; be suspicious of your hv meter if sets always have low hv. 8. check the antenna terminals, metal trim, metallized" knobs, screws, and all other exposed metal parts for ac leakage. check leakage as described below. fig. a. using an ac voltmeter to check ac leakage. leakage test the ac l eakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 ma (500 microampere). leakage current can be measured by any one of three methods. 1. a commercial leakage tester, such as the simpson 229 or rca wt-540a. follow the manufacturers' instructions to use these instructions. 2. a battery-operated ac milliammeter. the data precision 245 digital multimeter is suitable for this job. 3. measuring the voltage drop across a resistor by means of a vom or battery-operated ac voltmeter. the "limit" indication is 0.75 v, so analog meters must have an accu rate low voltage scale. the simpson's 250 and sanwa sh-63trd are examples of passive voms that are suitable. nearly all battery operated digital multimeters that have a 2v ac range are suitable. (see fig. a) how to find a good earth ground a cold-water pipe is guaranteed earth ground; the cover-plate retaining screw on most ac outlet boxes is also at earth ground. if the retaining screw is to be used as your earth-ground, verify that it is at ground by measuring the resistance between it and a cold-water pipe with an ohmmeter. the reading should be zero ohms. if a cold- water pipe is not accessible, connect a 60-l00 watts trouble light (not a neon lamp) between the hot side of the receptacle and the retaining screw. try both slots, if necessary, to locate the hot side of the line, the lamp should light at normal brilliance if the screw is at ground potential. (see fig. b) 1.5 k 0.15 f ac voltmeter (0.75 v) to exposed metal parts on set earth ground trouble light ac outlet box ohmmeter cold-water pipe free datasheet http://www.datasheet-pdf.com/
? 12 ? kv-29al40/kv-29al40a/kv-29al40c section 2 disassembly 2-1. rear cover removal 2-2. control switch removal 2-3. chassis assembly removal 2-4. service position control switch four claws nine screws (bvtp 3x12) free datasheet http://www.datasheet-pdf.com/
? 13 ? kv-29al40/kv-29al40a/kv-29al40c 2-5. picture tube removal how to handle an anode-cap 1 1 1 1 1 do not use sharp objects which may cause damage to the surface of the anode-cap. 2 2 2 2 2 do not squeeze the rubber covering too hard to avoid damaging the anode-cap. a material fitting called a shatter-hook terminal is built into the rubber. 3 3 3 3 3 do not force turn the foot of the rubber cover. this may cause the shatter-hook terminal to protrude and damage the rubber. 1 1 1 1 1 turn up one side of the rubber cap in the direction indicated by the arrow a a a a a . 2 2 2 2 2 use your thumb to pull the rubber cap firmly in the direction indicated by the arrow b b b b b . anode-cap removal note: short circuit the anode of the picture tube and the anode cap to the metal chassis, crt shield or carbon painted on the c rt, after removing the anode. removal procedures warning: before removing anode cap h.v. remains in the crt even after the power is disconnected. discharge the crt before attempting to remove the anode cap to avoid electrical shock. short between the anode and crt coating the earth ground strap. coating earth ground strap 3 3 3 3 3 when one side of the rubber cap separates from the anode button, the anode-cap can be removed by turning the rubber cap and pull- ing it in the direction of the arrow c c c c c . a b anode button c tension spring two dgc holders (m) four screws (tapping screw 7) anode cap a board cushion e board picture tube cv board hv board k board degaussing coil deflection yoke free datasheet http://www.datasheet-pdf.com/
? 14 ? kv-29al40/kv-29al40a/kv-29al40c fig. 2 blue red green fig. 3 fig. 1 fig. 4 purity control section 3 set-up adjustments the following adjustments should be made when a complete realignment is required or a new picture tube is installed. these adjustments should be performed with rated power supply voltage unless otherwise noted. the controls and switch should be set as follows unless otherwise noted: picture control ................. normal brightness control ......... normal 3-1. beam landing preparation: ? feed in the white pattern signal. ? before starting, degauss the entire screen. 1. input a raster signal with the pattern generator. 2. loosen the deflection yoke mounting screw, and set the purity control to the center as shown in fig.2. 3. turn the raster signal of the pattern generator to green. 4. move the deflection yoke backward, and adjust with the purity control so that green is in the center and red and blue are at the sides evenly. (fig.3) 5. move the deflection yoke forward, and adjust so that the entire screen becomes green. (fig.1) 6. switch over the raster signal to red and blue and confirm the condition. 7. when the position of the deflection yoke is determined, tighten it with the deflection yoke mounting screw. 8. when landing at the corner is not right, adjust by using the disk magnets. (fig.4) perform the adjustments in order as follows: 1. beam landing 2. convergence 3. focus 4. screen (g2) and white balance note: test equipment required 1. color bar pattern generator 2. degausser 3. dc power supply 4. digital multimeter a b cd d a c purity control corrects this area. disk magnets or rotatable disk magnets correct these areas(a-d). deflection yoke positioning corrects these areas. b free datasheet http://www.datasheet-pdf.com/
? 15 ? kv-29al40/kv-29al40a/kv-29al40c if the blue dot does not converge with red and green dots, perform the following steps: ? move bmc magnet (a) to correct insufficient h. static conver- gence. ? rotate bmc magnet (b) to correct insufficient v. static conver- gence. in either case, repeat beam landing adjustment. ( 2 ) dynamic convergence adjustment preparation: ? before starting, perform horizontal and vertical static convergence adjustment. 1. slightly loosen deflection yoke screw. 2. remove deflection yoke spacers. 3. move the deflection yoke for best convergence as shown below. ( fig. 8) 4. tighten the deflection yoke screw. 5. install the deflection yoke spacers. 3-2. convergence preparation: ? before starting, perform focus, v. lin and v. size adjustments. ? set brightness control to minimum. ? feed in dot pattern. (1) v ertical static convergence 1. adjust v. stat magnet to converge red, green and blue dots in the center of the screen. (vertical movement) tilt the v. stat magnet and adjust static convergence to open or close the v. stat magnet. 2. when the v. stat magnet is moved in the direction of arrow a and b, red, green, and blue dots move as shown below: r center dot g b r g b v. stat magnet v. stat magnet fig. 5 bmc magnet fig. 7 bgr b g r b g r r g b rg b rgb rgb bgr rgb r g b r g b bgr fig. 8 a b bmc magnet b purity v. stat bmc magnet b r g b r g rg b g r b g b r bg r a b a b b a b b a b b 1 2 3 fig. 6 free datasheet http://www.datasheet-pdf.com/
? 16 ? kv-29al40/kv-29al40a/kv-29al40c a a-b : screen-corner misconvergence b cd fig. 9 a permalloy assembly b d c fig. 10 focus screen fig. 11 green red service write n n n n n n n n n n pedestal 170 v dc n n n n n gnd 170 v dc disp. (item) item data service afc 0 service afc 0 (3) screen-corner convergence affix a permalloy assembly corresponding to the misconverged areas: 3-3. focus 1. adjust focus control for best picture. 3-4. screen (g2) 1. input a dots pattern. 2. set the picture and bright controls at minimum and color control at normal. 3. adjust sbrt, gcut, bcut in service mode with an oscilloscope as shown in fig. 11 so that voltages on the red, green, and blue cathodes are 170vdc. 4. observe the screen and adjust screen (g2) vr to obtain the faintly visible background of dot signal. 3-5. method of setting the service adjustment mode (1) ser vice mode procedure 1. standby mode. (power off) 2. on the remote commander. (press each button within a second.) (2) ser vice adjustment mode in 3. the crt displays the item being adjusted. 4. press 1 or 4 on the remote commander to select the item. 5. press 3 or 6 on the remote commander to change the data. 6. press then to write into memory. (3) ser vice adjustment mode memor y 7. turn set off and on to exit. 3-6. white balance adjustments 1. input an entire white signal. 2. set to service adjustment mode. 3. set dcol to "0" 4. set the picture and bright to minimum. 5. adjust with sbrt if necessary. 6. select gcut and bcut with 1 and 4 . 7. adjust with 3 and 6 for the best white balance. 8. set the picture and bright to maximum. 9. select gdrv and bdrv with 1 and 4 . 10. adjust with 3 and 6 for the best white balance. 11. reset dcol to "1". 12. write into the memory by pressing then . free datasheet http://www.datasheet-pdf.com/
17 kv-29al40/kv-29al40a/kv-29al40c a board the following adjustments should always be performed when replacing the following components which are marked with ] on the schematic diagram: dy, c511, c572, c573, c574, c575, d573, d574, r582, r583, r585, r586, r578, r579, t504, ic301, ic521, ic603, c507, c508, c509, c515, c520, l591, l501 (1) preparation before confirmation using variac, apply ac input voltage: 120 +2vac (or 220 + 2 vac for kv-29al40a/c) 1) turn the power switch on. 2) input a white signal and set the picture and bright controls to maximum. 3) confirm that the voltage between c574 (+) or tp503 and ground is more than: 105vdc. (2) hold-down operation confirmation 1) connect the current meter between pin 11 of the fbt (t504) and the pcb land where pin 11 would normally attach. (see figure 1.0 on next page) 2) input a dot signal and set picture and brightness to minimum: iabl = 100 +100a 3) confirm the voltage of a board tp-600 is 135 3vdc 4) connect the digital voltmeter and the dc power supply via diode 1ss119 to c574 (+). (see figure 1.0 on next page.) 5) increase the dc power voltage gradually until the picture blanks out. 6) turn dc power source off immediately. 7) read the digital voltmeter indication. st andard less than or equal to: 141.3 vdc 8) input a white signal and set picture and brightness to maximum: iabl = 1750 +100a 9) repeat steps from (4) to (7). st andard less than or equal to: 141.3 vdc section 4 safety related adjustments the following adjustments should always be performed when replacing the following components which are marked with ] on the schematic diagram: ic603, ic601, r699 1) using variac, apply ac input voltage: 130 + 2.0 vac (or 220.0 2.0 vac for kv-29al40a/c). 2) input a dot signal. 3) set the picture control and the bright control to minimum. 4) set to service adjustment mode. 5) select padj with and . 6) adjust with to the 0 level. 7) confirm the voltage of a board tp-600 is less than 138 vdc. 8) if step 7 is not satisfied, replace the components, repeat the above steps. 9) adjust with and for: 135 3 vdc 10) write into the memory by pressing then . b+ voltage confirmation and adjustment (3) hold-down readjustment if the current setting indicated in step 2-2 cannot be met, readjustment should be performed by altering the resistance value of r584, a component marked with . + i abl abl t504 fbt range - ammeter 3.0 ma dc a r584 confirmation method (hv hold-down confirmation) and readjustments free datasheet http://www.datasheet-pdf.com/
? 18 ? kv-29al40/kv-29al40a/kv-29al40c abl 11 ammeter 3ma dc range t504 fbt digital multimeter tp600 [a board] power supply c574 digital multimeter 1ss119 r584 free datasheet http://www.datasheet-pdf.com/
? 19 ? kv-29al40/kv-29al40a/kv-29al40c 5-1. electrical adjustment by remote commander 7. press then on the remote commander to initialize. carry out step 7 when adjusting ids 0 to 4 and when replacing and adjusting ic003. service reset 8. turn set off and on to exit. (3) adjust buttons and indicator use remote commander (rm-y165) to perform circuit adjust- ments on this model. note: test equipment required: 1. pattern generator 2. frequency counter 3. digital multimeter 4. audio osc (1) method of setting the service adjustment mode ser vice mode procedure 1. standby mode. (power off) 2. on the remote commander. (press each button within a second.) ser vice adjustment mode in 3. the crt displays the item being adjusted. 4. press or on the remote commander to select the item. 5. press or on the remote commander to change the data. 6. press then to write into memory. ser vice adjustment mode memor y green service write red (2) memory w rite confirmation method 1. after adjustment, pull out the plug from the ac outlet, then replace the plug in the ac outlet again. 2. turn the power switch on and set to service mode. 3. call the adjusted items again to confirm they were adjusted. section 5 circuit adjustments disp. (item) item data service sys 0 1 2 3 4 5 6 7 8 0 9 ch vol code set reset menu mts guide jump sleep ch + tv dbs enter display tv/video tv/vtr position freeze audio swap tv/video pip tv vtr vtr power dbs/cable tv muting tv dbs/cable function tv rm-y165 power 3 5 6 enter muting display 1 4 7 volume rm-y165 free datasheet http://www.datasheet-pdf.com/
? 20 ? kv-29al40/kv-29al40a/kv-29al40c (4) item of adjustments initial data no. item function data range ntsc pal-m pal-n video average data 1 hsiz horizontal amp. adj. 0-63 45 45 45 48 2 hpos horizontal pos. adj. 0-63 10 10 10 10 3 vbow vrt line bowing adj. 0-15 6 6 4 vang vrt line bow slant adj. 0-15 9 5 5 trap horiz. trapezoid adj. 0-15 7 5 6 pamp horiz. pin distortion adj. 0-63 21 20 20 30 7 cpin same as pamp-scrn tp/btm 0-63 40 40 40 30 8 vsiz vertical amp. adjust 0-63 39 31 38 35 9 vpos vertical position adj. 0-63 37 35 35 35 1 0 vlin vertical linearityadj. 0-15 7 6 6 6 1 1 scor vertical amount adj. 0-15 8 8 8 8 12 vzom 16:9 crt z mode on/off 0,1 0 0 1 3 eht vrt hl-volt. correction 0-15 4 4 14 asp aspect ratio control 0-63 47 47 1 5 scrl 16:9 crt z mode tran scrl 0-63 31 31 16 hblk rgb out width control 0,1 1 1 17 lblk left screen hblk contro l 0-15 15 15 18 rblk rgt screen hblk control 0-15 3 3 19 vusn v saw waveform compres 0,1 0 0 2 0 hdw h. drive pulse width 0,1 0 0 2 1 ewdc ew/dc adjust 0,1 0 0 22 lvln screen btm vrt lin adjust 0-15 0 0 2 3 uvln screen top vrt lin adjust 0-15 0 0 2 4 rdrv r output drive control 0-63 42 40 2 5 gdrv g output drive control 0-63 32 35 2 6 bdrv b output drive control 0-63 28 35 2 7 rcut r output cutoff control 0-15 9 7 2 8 gcut g output cutoff control 0-15 4 5 2 9 bcut b output cutoff control 0-15 4 5 3 0 dcol dynamic color on/off 0,1 0 1 31 shue sub hue 0-31 14 8 32 scol sub color 0-31 18 14 14 14 3 3 sbrt sub brightness 0-31 14 12 3 4 ron r output on/off 0,1 1 1 3 5 gon g output on/off 0,1 1 1 36 bon b output on/off 0,1 1 1 37 axpl axis pal 0,1 0 0 3 8 axnt axis ntsc 0,1 0 0 39 cbpf chroma bpf on/off 0,1 0*, 1** 4 0 ctrp y trap filter on/off 0,1 1* , 0** 4 1 coff color on/off 0,1 0 0 4 2 koff set color killer 0,1 0 0 43 sshp sub sharpness 0-15 7 6 4 4 shpf sharpness circuit f0 0,1 1 1 1 45 prel pre/ovr shoot switching 0,1 1 1 4 6 y-dc dc trans ratio switching 0,1 1 1 4 7 gamm gamma correction amnt 0-3 0 0 48 ablm abl mode switching 0,1 1 1 4 9 vth abl c d vth switching 0,1 1 1 50 ydel y delay time control 0-15 7 7 51 ncol no color id 0,1 1 1 5 2 fsc fsc out on/off 0,1 1*, 0** 5 3 k-id killer id control sw 0,1 0 0 54 hosc h vco oscillation freq 0-15 7 7 55 vss v sync slice level 0,1 0 0 56 hss h sync slice level 0,1 0 0 57 hmsk 0,1 1 1 58 vtms select signal vtim pin 0-3 0 0 5 9 cdmd v cnt dwn mode switching 0-3 0 1 6 0 afc afc loop gain switching 0-3 0 0 free datasheet http://www.datasheet-pdf.com/
? 21 ? kv-29al40/kv-29al40a/kv-29al40c note: no. 1 through 106 show adjustment order. service id0 25 * ntsc models ** trinorma models initial data no. item function data range ntsc pal-m pal-n video average data 6 1 fifr field frequency 0-3 3*, 1** 62 sbal sub balance 0-31 14 14 63 disp osd position 0-127 15 15 64 padj power adjustment 0-63 3 3 65 pshp pip sub sharpness 0-15 7 7 6 6 ppix pip sub contrast 0-15 7 7 67 phue pip sub hue 0-15 3 3 68 pcol pip sub color 0-15 5 5 5 5 69 ptrp pip c trap f0 0-15 7 7 70 pafc pip afc 0-3 1 1 1 7 1 pydr pip y drive 0-31 14 14 72 uped u ped 0-15 8 8 73 vped v ped 0-15 8 8 74 u2pe u2 ped 0-15 5 5 75 v2pe v2 ped 0-15 5 5 7 6 y2dr y2 drive 0-31 20 20 7 7 u2dr u2 drive 0-31 18 18 78 v2drv v2 drive 0-31 9 9 79 psfo pip shp f0 0,1 1 1 80 pcd2 pip cd mode 2 0,1 1 1 1 81 pdct pip dc tran 0-7 4 4 82 pp/o pip pre/over 0-3 1 1 83 pdly pip y delay 0-3 0 0 8 4 pbg pip bg 0-15 5 5 8 5 pext pip ext color 0,1 1*, 0** 1** 0* 86 phmk 0,1 0 0 87 abl0 0,1 0 0 88 abl1 0-7 1 1 89 phpo pip horizontal position 0-63 58 58 90 pvpo pip vertical position 0-31 18 18 9 1 pysd pip ys delay 0-15 1 1 92 pydl pip y input delay 0-7 0 0 93 phvi pip hv sync 0,1 0 0 94 pclp pip clamp 0-3 0 0 95 pclk pip clock 0,1 1 1 9 6 pihs inset horizontal sync 0-15 2 2 97 pivs inset vertical sync 0-63 22 22 98 pmvs main vertical synv 0-63 17 17 99 pcon pip contrast 0-15 10 10 100 pfry pip frame y 0-15 5 5 101 pfrc pip frame chroma 0-255 0 0 102 pfrw pip frame width 0-31 20 20 103 psel pip sel 0,1 1 1 104 ppll pip pll 0-3 0 0 105 pvpe pip v ped 0-15 0 0 106 pupe pip u ped 0-15 0 0 free datasheet http://www.datasheet-pdf.com/
? 22 ? kv-29al40/kv-29al40a/kv-29al40c r on . . . . . . . . . . . on (1) g on . . . . . . . . . . . off (0) b on . . . . . . . . . . . off (0) 6. connect an oscilloscope probe to c board, cn301 pin 5 (red out). 7. select rdrv with and . 8. adjust with and for: 1.90 0.05 vp-p. 9. reset the item dcol to "1" level. 10. write the memory by pressing then . 11. return the following back to normal after adjustment. picture . . . . . . . . . . . max color . . . . . . . . . . . center bright . . . . . . . . . . . center r on . . . . . . . . . . . on (1) g on . . . . . . . . . . . on (1) b on . . . . . . . . . . . on (1) (5) feature id map 5-2. a board adjustments h. freq uency adjustment 1. input a monoscope signal. 2. set to service adjustment mode. 3. connect a frequency counter to base of q501 (tp-500 h. drive). 4. select the item of afc, set to 3 level (free run). 5. check h. frequency for the 15735 200 hz. (ntsc) or check h. frequency for the 15650 200 hz. (trinorma) 6. select the item of afc again, adjust the level "0". 7. write into the memory by pressing then . v . freq uency adjustment 1. select video 1 with no signal input. 2. set the conditions with standard setting. 3. connect the frequency counter across tp-508 or cn501 vdy (+) pin 6 connector and ground. 4. check v. frequency for the 60 2 hz (ntsc) 5. check v. frequency for the 50 2 hz (trinorma). sub contra ct adjustment (scon) 1. input a color-bar signal. 2. select the red color. 3. set to service adjustment mode. 4. select the item dcol to "0" level. 5. set the conditions as follows. picture . . . . . . . . . . . max color . . . . . . . . . . . min bright . . . . . . . . . . . center white 1.90 0.05 vp-p n n black 1.8 ?0.05 vp-p 1.90 ?0.05 vp-p 1: on 0: off service ron 1 kv- destination id-0 id-1 id-2 id-3 id-4 id-5 id-6 id-7 1 29al40 2 151 3 173 195 551064 3 (e) (e) (e) 29al40a 29al40c 145 3 173 195 63 1 0 64 145 3 173 195 63 1 0 64 free datasheet http://www.datasheet-pdf.com/
? 23 ? kv-29al40/kv-29al40a/kv-29al40c h. center adjustment (hpos) note : perform this adjustment after checking h. frequency. 1. input a cross-hatch signal. 2. set the service adjustment mode. 3. select hpos with and . 4. adjust with and for the best horizontal center. 5. write into the memory by pressing then v . linearity (vlin) and v correction 1. input a cross-hatch signal. 2. v. correction is automatically adjusted from the circuit and should satisfy the conditions below: ser vice adjustment mode memor y 1. change dcol to "1". 2. after completing all adjustments, press "0" then . / / v. size (vsiz) displa y position adjustment (disp) 1. input a color-bar signal. 2. set to service adjustment mode. 3. select disp with and . 4. adjust with and for adjustment of characters to center . 5. write the memory by pressing then . 6. check if the text is displayed on the screen. sub bright adjustment (sbr t) 1. input a cross-hatch signal. 2. set to service adjustment mode. 3. set the picture and bright to minimum. 4. select sbrt with and . 5. adjust with and to obtain a faintly visible cross-hatch. 6. write into the memory by pressing then . sub hue, sub color adjustment (shue, scol) 1. input a color-bar signal. 2. set to service adjustment mode. 3. select the item dcol and set to "0" level. 4. connect oscilloscope probe to c board, cn301 pin 7 (blue out). 5. select shue and scol with and . 6. adjust with and for the v1 = v4 0.1vp-p (scol) and v2 = v3 0.1vp-p (shue). 7. reset the item dcol to "1" level. 8. write into the memory by pressing then . v . size adjustment ( vsiz) 1. input a cross-hatch signal. 2. set to service adjustment mode. 3. select vsiz with and . 4. adjust with and for the best vertical size. / ? h. center (vpos) / ? v. center (vpos) service disp 15 v . center adjustment (vpos) 1.input a cross-hatch signal. 2.set to service adjustment mode. 3.select vpos with and . 4.adjust with and for the best vertical center. 5.write into the memory by pressing then v1 v2 v3 v4 read from memor y green 0 service read red free datasheet http://www.datasheet-pdf.com/
? 24 ? kv-29al40/kv-29al40a/kv-29al40c notes: free datasheet http://www.datasheet-pdf.com/
? 25 ? kv-29al40/kv-29al40a/kv-29al40c notes: free datasheet http://www.datasheet-pdf.com/
? 26 ? kv-29al40/kv-29al40a/kv-29al40c notes: free datasheet http://www.datasheet-pdf.com/
? 28 ? 6-2. circuit boards location d y , c5 1 1, c572, c573, c574, c575, d573, d574, r582, r583, r585, r586, r578, r579 , t504, ic301, ic521,ic603, c507, c508, c509, c515, c520, l591, l501 ic603, ic601, r699 part replaced ( ] ) all voltages are in v . v oltage is dc with respect to ground unless otherwise noted. readings are taken with a 10m digital multimeter. ? readings are taken with a color-bar signal input. ? v oltage variations may be noted due to normal production tolerance. ? circled numbers are waveform references. ? : b + line ? : b - line ? m : signal path reference information resis t or : rn me t a l film : rc solid : fprd non flammable carbon : fuse non flammable fusible : r w non flammable wirewound : rs non flammable me t a l oxide : rb non flammable cement : adjustmen t resis t or coil : lf-8l micro inductor ca p aci t o r : t a t an t alum : ps styrol : pp po l ypropylene : pt mylar : mps me t alized po l yester : mpp me t alized po l ypropylene : alb bipolar : a l t high temper a ture : alr high ripple pitch: 5mm rating electrical power 1/4w all resistors are in ohms. k =1000, m=1000k ? f nonflammable resisto r . ?: internal component. ? p : panel designation and adjustment for repai r . all variable and adjustable resistors have characteristic curve b, unless otherwise noted. the components identified by ] in this manual have been carefully factory-selected for each set in order to satisfy regulations regarding x-ray radiation. should replacement be required, replace only with the value originally used. when replacing components identified by ] make the necessary adjustments indicated. if results do not meet the specified value, change the component identified b y [ and repeat the adjustment until the specified value is achieved. (refer to r584 on page 17 and 18). 6-3. printe d wiring boa r ds and schematic diagrams note: all capacitors are in m f unless otherwise noted. pf: mm f 50wv or less are not indicated except for electrolytic and tantalums. all electrolytics are 50v unless otherwise specified indication of resistance, which does not have one for rating electrical powe r , is as follows: adjustment ( [ ) hv hold-down (r584) b+ vo l t age confirm a tion note : the symbol g displ a y is on the component sid e . the components identified b y shading and mark are critical f or sa f et y . replace only with pa r t number specified. the symbol g indicates fast operating fus e . replace only with fuse of same rating as marked. when replacing parts in the table below be sure to perform the related adjustment. hv ht hz (29al40a on l y) a cv e k v v - - - - - free datasheet http://www.datasheet-pdf.com/
1 4 5 6 8 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 8 9 10 11 1 2 3 4 1 2 3 4 5 6 1 2 3 4 5 6 7 8 1 3 2 4 6 t502 cf001 x300 x301 x302 t5001 t5050 t504 t501 sw501 s2002 s2003 s2004 s2005 s2006 s2007 s2001 d2006 sbt hdt 1 2 1 2 1 2 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 45 6 8 12 12 1 2 3 1 2 1 2 1 2 1 2 1 1 1 1 1 2 1 2 1 1 2 1 2 1 2 1 1 2 12 1 2 3 4 5 6 7 8 9 10 11 12 13 14 12 12 1 2 1 2 3 4 5 6 7 8 1 12 1 2 12 12 12 12 12 12 12 12 1 2 3 4 5 6 8 9 10 11 1 2 3 4 1 2 1 2 12 12 12 1 2 1 2 12 1 2 1 2 12 1 2 1 2 1 1 1 2 1 1 1 2 1 2 3 4 6 1 2 12 1 2 1 2 1 2 3 4 12 1 212 1 2 12 12 12 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 3 4 1 2 1 2 1 2 1 2 1 2 1 2 12 1 2 3 4 5 6 1 2 1 2 1 2 1 2 12 1 2 1 2 1 e (chassis) v l r ( a/v sw audio-amp, pin-mod, v. def, h.def, av-sw micon, y/c jungle, tuner, vol-ctl av1 l r tuner l out r out tu101 buff buff i-hsync ic001 tuning-micon io-bdat 0-bclkn memory ic301 y/c jungle o-r o-g o-b b2-i r2-i g2-i f-mono st led mode aft o-mono i-stereo o-sap i-aft data clock 1 2 3 4 e b int b dat b clk l out1 r out1 l-in r-in l-out r-out l-out r-out in1+ in2+ mute mute o-mute buffer i-vpn v-tim vd+ vd- hd q501 q502 o-sclkn io-sdat sda scl buffer r out g out b out ik 5v reg +9v +5v o-mute bclk bdat i-bintn to crt high voltage j201 ew to c board focus h-drive h-out pin drives h-center adjust main v main l main r sclkn sdata o-osdblk o-ym ys2/vm i-dsc o-dsc xtal1 xtal2 to fbt focus focus processor q287,q288 tv/c2 det out 2 q286 det out q002 h sync sep q001 q650 +5v +7.5 stby +5v reg ic002 xtal3 c 1 1 2 3 4 5 6 e nc nc +b ik r in g in b in r out g out b out crt drive (from f b hv 1 2 3 4 5 6 e nc 200v nc +b cn502 audio ic402 ic202 q201 q200 j200 r ear r /fix var/fix mute t603 prt power control t602 audio vcc drive q601 +12v ac rect d601 ry601 conv.out ic601 1 2 1 2 1 2 1 2 3 ac ac ac ac gnd gnd gnd gnd 7.5v sw q5001 sw q5002 (energy start) ry602 7.5v 9v reg +12v +9v 7.5v stby driver q604 q670 to ic001 pin6 soft start ic603 4 3 12v 1 2 3 gnd gnd 7.5v 1 2 gnd gnd ac ac ac power s901 (ac power) ac ac 11 2 2 ac in q310 q309 ik g q307 b q306 fv hv fbt g2 200v 115v 5 6 9 8 7 2 4 1 0 0 11 i-hp o-chblk2 yuvsw to c board heater heater q350-q353 y drives c drives q354-q357 q360 q358,q359 buf q302 buf dig comb filt ic302 comb y comb c ayo aco xtal3 fin adin monout i-cvin pin 6 b+ g2 heater g2 to fbt heater ablin q555 afcfil b+ q521,q522 q305 out1 v cntl ic 521 in2- in1+ in1- in2+ out2 buf q300 hp/prot to fbt pin 11 buf to fbt pin 7 buf q571 q550 o-dgc v out1 q608 v l r j2231 1 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 1 2 3 4 5 6 7 gnd v2-l v2-r v2-v gnd push-b power mpwr/st stby/tim ir 5v 1 2 3 e tv/v set up power ch+ ch- vol+ vol- 1 2 3 key e power on srs1 srs2 vcc e bbe 1 2 3 4 5 6 7 8 9 10 11 gnd v2-l v2-r v2-v gnd push-b power mpwr/st stby/tim ir 5v ic2003 srs1 srs2 vcc left in e right in bbe left out right out l out r out ic1403 mode1 mode2 ic1404 r in l in ) 1 2 sp r+ sp r- sp l+ sp l- 1 2 3 4 5 6 7 1 2 3 e 1 2 3 4 5 6 7 spsw mute e au+ au+ au- au- left in right in spsw mute e au+ au+ au- au- mute q1400 inv ninv out2 out1 m/ss inv ninv out2 out1 m/ss r audio amp ic1400 l audio amp ic1401 left out right out srs1 srs2 bbe i-rmcn i-key cn1702 r q308 cn1701 cn301 ic1701 cn1704 (audio amp) cn1400 3 4 cn1401 cn1402 cn251 v2-front ir detector cn2200 cn250 cn1406 cn1405 cn253 (cntl/audio) audio proc. vol cntl. for all models except: 200v cn203 for jig cn1703 h dy+ h dy+ h dy- h dy- v dy- v dy+ cn501 h.dy h.dy v.dy v.dy v out out ic541 drive+ drive- buffer buffer buf ( only acin dgc dgc 1 2 dgc dgc cn602 cn601 cn604 cn101 cn5001 cn5003 cn901 cn902 cn5000 cn5002 ic003 o-led ic604 ic203 mute mute mute q400 q203 q204 o-spsw q081 to cn502 pin 6 v1-v v1-l v1-r v2-v v2-l v2-r kv-29al40a for kv-29al40a only for kv-29al40a out) (rgb b-sv6867 -blk ac ac 1 2 1 2 3 key e power on cn2001 (cntl) cn2201 200v rear cn1400 +b g2 to fbt g2 cn1703 1 2 3 4 5 6e b g r 9v 1k e b g r 9v 1k 1 2 3 4 5 6 free datasheet http://www.datasheet-pdf.com/
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 1 2 3 4 5 6 1 2 3 4 5 6 7 1 2 1 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 1 2 3 4 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 r o u t l o u t v c c 9 v v c c 3 0 v v c c 5 v s c l s d a a s r f a g c o u t if o u t v c c 9 v a f t o u t n c n c d e t o u t 2 d e t o u t s t l e d s a p l e d m o d e f m o n o s m d m u t e s o u t 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1 3 2 4 6 1 4 5 3 1 2 3 4 5 6 7 1 2 1 2 3 4 5 6 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 4 5 6 8 14 13 12 11 10 9 8 7 6 5 4 3 2 1 l r io g 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 1 2 3 4 5 6 7 1 2 3 4 5 6 1 2 3 1 2 3 4 5 6 7 8 9 10 11 -2 v l r c690 c692 c008 c693 c037 r049 r045 r047 c020 c038 c691 c001 c047 c014 r017 r058 c225 r243 c101 r253 r324 r650 c576 r319 r690 c562 r586 r304 r312 r316 r542 r543 r535 c531 d541 d574 c219 r631 c222 c620 c541 c542 c308 c305 c306 c303 r056 c028 c062 c010 r622 r075 r073 l504 c373 c375 c376 c151 r150 r151 r250 r263 r264 r298 c288 c289 c256 c257 c501 c504 c527 c571 d501 fb521 fb522 r503 r505 r521 r522 r523 r524 r526 r529 r532 r533 r541 r548 r214 r216 c207 c208 r219 r221 r223 r224 c209 c211 c213 r229 r228 t501 r046 c520 r562 c529 c513 c629 c285 c524 c311 c313 r578 l003 l150 d602 r618 vdr602 c611 r699 jw602 d615 c011 r070 r241 r571 c614 c613 r576 r244 r245 r057 r050 r013 r242 r691 c012 r091 r220 c402 c401 c400 c403 c404 c405 c406 c407 c410 c411 c412 c413 c414 c415 c416 r402 r544 r520 r546 t504 l302 l151 l001 c350 c351 c352 c353 c354 c355 c356 c357 c358 c359 c360 c361 l350 r350 r353 r354 r355 r357 r358 r359 r361 r373 r375 r376 r377 r379 r381 r585 c377 c300 r008 r217 r018 d610 r600 r601 r352 r380 r308 r329 r333 r342 c654 c102 r034 r035 d522 d523 d571 d572 d581 d690 r203 r204 d003 r362 r378 r004 r317 r369 r372 t502 c314 r321 r322 r218 r222 ry601 r307 r328 r313 r314 c307 c612 c615 c616 c390 r509 c574 r582 r502 r534 r207 c286 r005 r006 r365 r374 j200 r344 d670 r670 r257 r399 l301 l351 c543 c510 l502 r297 fb501 c320 c321 r279 r299 r320 r403 r404 r528 r525 r527 r674 r642 r209 t603 l591 c591 r506 c573 c039 c508 c512 c514 c218 c150 c610 c505 c507 c503 c526 c525 c575 c530 c528 r205 ps201 r432 c418 d403 r040 d303 r370 r081 r401 r405 r406 r315 c323 c324 r368 c509 c515 c511 c555 r648 c632 r001 c070 r604 r605 d604 d605 d618 d620 sw501 t602 jw655 jw654 jw656 jw657 c521 r043 r340 r549 r630 r606 r603 jw601 r508 r647 r675 r551 r510 r602 r587 r019 r641 ry602 r671 r608 r610 r609 r611 r092 jw630 c420 c362 jw122 r579 r561 jw651 jw650 jw652 jw653 r507 d502 d503 d520 c319 r318 r101 r256 d207 q002 d080 r085 r002 c060 r028 r213 r215 q201 r230 c223 r210 ic203 ic402 cf001 c092 r031 c091 c019 r016 c048 r038 c017 c046 r010 r051 r011 r071 r044 r032 r048 c030 l002 r054 c034 r086 r088 r087 d004 c316 c317 c318 r331 r330 c330 r347 r356 r323 q300 c310 c309 r310 r364 r366 d306 r550 r580 r553 c553 r552 r591 r572 r573 r575 c564 r096 c005 r074 r076 c006 r077 c007 r007 c301 r302 x302 c302 x300 x301 q400 r343 r345 r346 r554 r555 r558 r559 c312 c331 c332 c380 c381 c382 c621 c606 c607 jw150 r300 r334 r351 jw450 c226 c581 r581 r360 r511 r624 c623 c624 r623 r225 c212 r226 r227 r673 d691 r692 cn203 cn101 r547 c617 r557 r556 r367 r336 r335 r341 ic604 c619 c618 l101 r033 r003 c065 jw451 d208 c284 c374 r306 r305 ic301 fb350 c502 q501 ic541 ic601 q670 d601 ic603 ic002 q502 q521 q522 ic521 q555 q571 c653 ic003 q360 q302 q359 q358 q357 q356 q355 q354 q353 d305 q352 q351 r363 q350 r337 ic302 q200 q288 l501 cn251 cn253 cn502 cn501 cn604 cn602 r653 j201 r270 r271 r272 ic001 r504 r258 r259 r249 r251 r273 r274 r583 r584 cn250 cn301 cn601 c287 c290 c626 c258 d205 d650 d253 d254 d255 d001 d621 d622 d005 c021 d521 d302 d550 d551 d552 d573 d561 d562 fb601 fb602 fb603 fb605 ic202 l503 l520 q001 q081 q203 q204 q286 q287 q305 q306 q307 q308 q309 q310 q550 q601 q604 q608 q650 r612 r613 r025 r026 r027 r388 r387 r311 r530 r574 r400 tu101 thp601 0.001 b:chip 0.001 b:chip 0.001 b:chip 0.001 b:chip 0.1 25v b:chip 0.1 :pt 470p b:chip 0.0022 b:chip 470 25v 220p ch:chip 2200p b:chip 4.7 47 25v 0.47 0.47 4.7 10 10 0.1 10 0.0047 b:chip 1 1 1 1 4.7 0.1 :chip 0.1 :chip 10 0.01 :chip 0.01 :chip 0.1 25v f:chip 0.1 25v f:chip 47 25v 10 16v 4.7 0.1 4700p :chip 4.7 4.7 4.7 4.7 10 4.7 0.1 0.1 47 0.1 4.7 330p 680p 500v b 0.001 100v :pt 0.047 630v 220p 500v b 22 0.0022 :chip 0.068 200v :pt 220 47 470 25v 10 33 160v :hr 0.47 :mps 680p 1000 25v 100 25v 0.47 470 25v 47 25v 0.47 :mps erc06-15s gp08dpkg23 ez0150av1 d10sc4m 1.1uh 1.1uh :flr50 :chip :chip :chip :chip 220 :chip 22k :chip 470k :chip 1k : chip 4.7k :chip 220 4.7k :chip 47k :chip 10k :chip 4.7k 4.7k :chip 4.7k :chip 4.7k 4.7k 10k :chip 10k :chip 100 :chip 100 :chip 470k :chip 470k :chip 220 :chip 10k :chip 10k :chip 10k :chip 10k :chip 10k :chip 4.7k :chip 100k :chip 4.7k : chip 27k :chip 39k :chip 1k :chip 1k :chip 220 :chip 15k 2w :rs 220 220 470 :chip 10k :chip 220 :chip 100 10k :chip 4.7k :chip 1m :chip 5.6k :fprd 47 :rs 47 1w 330 680 10k :chip 10k 22k :chip 150k :chip 4.7k :rn 47k :rn 100k 12k 10k 10k 1.5 1w 470 2w 12k 0.47 1/2w 0.47 2w :rs 100k 47k 1w :rs 10k :chip 10k :chip 10 1/4w :rf 10 10k 680 3.3 1w :rs 470 1/4w :fprd :hdt 220p ch:chip 100 16v 100 16v :bp 0.0047 :chip 0.022 100 16v el1z-v1 :4g 1ss133t-77 :4a 220 :chip 220 :chip 100 :chip 1k :chip 6.8k :chip 15 1/4w :rd 1ss133t-77 :4a 1ss133t-77 :4a 1ss133t-77 :4a 1ss133t-77 :4a 1ss133t-77 :4a 1ss133t-77 :4a :pmt 1.2k 3w 1k 2w 2p :chip 2.2 250v 2.2 :f pit 33 1w 10 :ci 0.15 200v 470 25v 470 25v 0.47 :mps 470p 2kv 0.014 2kv 820p 500v b 1 47p 500v ch 10000p :chip 100p :ch 0.47 10 0.01 200v 0.62 200v 2200p :chip 1000p :chip 0.47 4.7 4.7 160v 0.0047 1500p 0.22 0.22 1ss133 1ss133 1ss133t-77 1ss133t-77 10k :chip 100 :chip 1k :chip 470 100 :chip 560 :chip 560 :chip 100 :chip 100 :chip 5.6k :chip 5.6k :chip 10k 4.7k 560 :chip 4.7k 220 :chip 220 :chip 100 0 :chip 220 :chip 0 :chip 100k :chip 220 220 100k :chip 100 :chip 10k 6.8k :small 18k :chip 2.2k 18k 10k :chip 47k 2.2k 22k 220 :chip 680p 2kv 680p 2kv 1.5 200v 0.0022 :chip jw(5mm) 10 220 :chip 220p b:chip 470k 470k s2l60f s2l60f d2s4mta-1 d2s4mta-1 prt (7.5mm) (7.5mm) (7.5mm) (7.5mm) 2200p 2kv 1k 1k 10k 2.2k 0.47 1/2w 56 2w 10k 22 1w 470 56 2w 10k :chip 4.7k 13w:rs relay 1k 68k :rs 68k :rs 68k :rs 68k :rs 10k :chip (10mm) 1 (10mm) 620 :chip 0.47 1/4w (7.5mm) (7.5mm) (15mm) (15mm) 680 1/2w gp08d gp08d mdv04-600 4.7 10k :chip 220 :chip rd3.3es-t1b :40 2sd601a buffer 1ss133t-77 1k :chip 10k :chip 470p b:chip 1k :chip 2.2k :chip 220 :chip 2sd601a-q mute :1b 10k :chip 47 25v :ci 10k :chip mm1313ad av-switch cxa2021s audio processor :sv 15p :chip 680 :chip 15p :chip 560p :chip 470 :chip 0.001 b:chip 1k :chip 1 47 25v 220 chip 220 chip 220 :chip 4.7k 1/10w :rk-cp 220 220 100 :chip 220p ch:chip :chip 10k :chip 0.022 25v b:chip 680 :chip 680 :chip 680 :chip 1ss133 0.01 :chip 0.01 :chip 0.01 :chip 100 :chip 100 :chip 330p b:chip 1k :chip 2.7k :chip 330 chip 2sd601a-q hp/protect :1b 1 1k :chip ma111-tx 2.2k 100k 47 1/2w :rd 22 250v 220k 22 2w :rs 10k 470k 470k 470 25v 680 :chip 1 10k :chip 1m :chip 0.047 50v f:cc-cp 100k :chip 220p :chip 100 1/10w 18p :chip :sv 2sd601a-q mute 1000 25v 0.01 :chip 0.01 :chip 0.01 :chip 470 25v 560 250v 560 250v (7.5mm) (12.5mm) 4.7 50v :ci 4.7 6.8k 0 3.3k 2.2k 0.0047 0.0047 :pt 100k 10k :chip 4.7 4.7k 100k :chip 2.2k 1ss133t-77 :4a 15 1/4w :rd 4p gry :micro 2p 2.2 :small 470p 500v :cc 2.2k :chip 2.2k :chip 10k :chip pq09rf21 9v reg. 33 160 :hr 470p 500v :cc :chip 220 220 :chip 1000p :chip (5.0mm) mtzj-t-77 2.2a 47 25v 470 16v 10k :rn-cp 220 :chip 0.047 200v :pt 2sc3209lk-tp h.drive :1b tda8172 v.out :hn mx0541ab-f conv. out :9z 2sd774-t-34 relay drive d3sb60f ac-rect :4e dm-58 power control mm1319afbe stby+5v reg. :hj 2sc5426-01 h.out :if 2sd601a pin-drive 2sc4159 pin-out njm2903m-te2 v.control hold :hc 2sd601a buffer 2sa1091o-tpe2 ocp :0b 47 25v st 24c08fm6tr memory 2sd601a buffer ma111-tx 2.2k :chip 2sd601a-q mute :1b 2sd601a buffer :hlc 7p to k-board cn 1402 7p to hv-board cn 1405 6p :s-micro 6p wht :dy 3p 2p wht :mini 1 3p 75 :chip 470k :chip 470k :chip m37273mf 1 1w 220 :chip 220 :chip 100 :chip 100 :chip 4.7k :chip 4.7k :chip 100k :chip 47k :chip 11p 6p :s-micro 2p wht :ac 0.47 0.47 50v 100 25v 0.47 mtzj-t-77-30d :40 rd5.6esb2 +5v ref. :40 rd10 esb2 protect :40 rd10 esb2 protect :40 rd10 esb2 protect :40 mtzj-t-77-5.1c :40 d1nl40 d1nl40 rd5.6esb2 220p :chip el1z :4g mtzj-t-77-5.1c :40 rd8.2 1ss133t el1z rd8.2 esb2 egp20g egp20g 0.45uh :f 0.45uh :f 0 uh :e 0 uh :f :ha :y-chk :choke 2sa1162 h.sync.sep :0b 2sa1162 hp 2sa1175 sw 2sd601a-q sw :1b 2sa1162 buffer 2sa1162 buffer 2sa1162 buffer :0b 2sa1162 buffer 2sa1162 buffer 2sa1162 buffer 2sa1162 ik buffer 2sa1162 ik buffer 2sc2785 :1b 2sc2785 relay drive :1b 2sc2785 stby :1b 2sa1175 soft s. 2sd1312 5v reg. :1b 1 1w 1 1w 5.6k 5.6k 5.6k dtz5.1b 5.6k :chip 0 jl 5mm 47k :chip 820 :fprd 22k btf-wa411 9v set 9v set 9v main mute mute vp vol 5v 9v sda video video r g b +b +b audio vcc audio vcc vp +b 9v sda scl a u d io v c c r b g 9v vol 5v s e t -5 v s e t 9v * :chip * * * * * * * * * :chip * * * * * ** * * * * * * * * :chip * * :chip * * * * * * * * * * * * * * * :chip * * * * * * * * * * * * :chip * :chip ** * * :chip * * * * :chip * * :chip * * :chip * :chip * :chip * :chip * :chip * :chip * :chip * chip * * chip * * * * :chip * * y.chroma.jungle * :chip * buffer * buffer * buffer * buffer * buffer * buffer * buffer * buffer * buffer * buffer * * buffer * digital comb filter r g b e ik h dy + h dy - v dy - v dy + h dy - h dy + out 9v fv hv v out v mid fbt rf-agc e a c a c d g c d g c i-hp i-cvin i-cnvss i-dsc o-osc vss o-r o-g o-b o-osdblk io-bdat i-reset vcc b int b dat b clk g2 h.dy h.dy v.dy v.dy 200v 115v 115v abl h h control tuning system o-sclkn io-sdat i-vhold to dgc ao a1 a2 vss vdd b-clk b-dat lr g n d 1 2 v o u t -1 in -1 in + 1 o u t 2 in -2 in + 2 5 6 9 8 7 2 4 1 0 0 11 o-bclkn n c g n d g n d r e s e t c d o u t in set+9v h.drive set 9v det out blue out h out stereo rear-var/fix var/fix d r iv e + b o o s t d r iv e - v c c + v c c - out1 in-1 in+1 -vcc +vcc out2 in-2 in+2 +b audio vcc stby+5v b+ set+5v -13v +13v h.prot r e f e heater i-vpn o-vol o-adj o-mute i-rmcn i-hsync i-prot i-powern i-hlf o-led i-avcc i-key o-dgc i-aft o-ym o-sap v 1 -v v i-l v 1 -y v 1 -r v 1 -c s w 1 v 2 -v v 2 -l v 2 -y v 2 -r v 2 -c s w 2 v 3 -l n c v 3 -r n c n c s c l s d a l o u t 2 v o u t 2 r o u t 2 s u b l i-aft2 o-chblk1 i-bintn o-marker i-steren o-mono o-hsyncsw o-antsw2 o-chblk2 o-antsw1 s u b r m u t e c in g n d y in r o u t 1 l o u t 1 n c b ia s y o u t 1 v c c c o u t 1 m a in r m a in l c l p e n c l p o a d in a d v s a d v d a c o d a v d a y o d a v s v r f v g v b ir f m o d 2 m o d 1 t s t 3 v d d 2 v s s 2 t s t 2 t s t 1 f in c k s l in it c p o v c v p l v d p l v s a p c n v s s 1 v d d 1 v o u t 1 s u b v gnd v2-l v2-r v2-v gnd push-b ir mute gnd audio + audio + audio - audio - nc nc 200v r -in g n d c l -r c h -r b a l t r e b a s v o l r -o u t d e t 2 s c l s d a d e t 1 l -o u t p s h p 0 h p 1 v r s c h -l c l -l v c c l -in s r s 1 s r s 2 v c c l e f t o u t e r ig h t o u t b b e a p e d y c l a m p g n d 1 e w i r e f v d + v d - r e g h d s c l s d a e y in a b l f il s c p v m c 1 a b l in c v b s 1 /y 1 v t im m o n o u t c o m b c o m b y h p /p r o t e c t a f c f il ik in r o u t g o u t b o u t y s 1 b 1 in g 1 in r 1 in y s 2 /y m b 2 in g 2 in r 2 in v c c 1 y u v s w e r -y in e b -y in g n d 2 c v b s 2 /y 2 t v /c 2 v c c 2 a p c f il x t a l 3 x t a l 2 x t a l 1 o-relay srs1 srs2 bbe gnd power tp001 tp100 tp101 tp102 tp300 tp400 tp500 tp501 tp502 tp503 tp504 tp506 tp507 tp508 tp600 tp601 tp602 s p s w 7.5v o-ycsw o-spsw m a in v v 3 -v a d r gnd g n d g n d :lightening o-stled mpwr/st stby/tim micon y/c/j tuner vol-ctl pin-mod v.def h.def av-sw 200v cn1702 to cv board cn1701 to cv board to hv board cn2200 to e board cn5001 stby 5v (to cv board) hv focus g2 (to cv board) cn1703 (to crt) b-sv6867-a to e board cn5002 free datasheet http://www.datasheet-pdf.com/
a board waveforms 3.5 vp-p (8mhz) 4.9 vp-p (h) 1.5 vp-p (h) 3.0 vp-p (h) 1.5 vp-p (h) 4.2 vp-p (v) 2.0 vp-p (h) 1.5 vp-p (h) 1.5 vp-p (h) 1.5 vp-p (v) 1.5 vp-p (v) 8.5 vp-p (h) 6.0 vp-p (h) 3.4 vp-p (h). 3.0 vp-p (h) 3.2 vp-p (h) 2.0 vp-p (h) 1.8 vp-p (h) 1.5 vp-p (h) 2.06 vp-p (h) 190 vp-p (h) 32.0 vp-p (h) 1.05 kvp-p (h) 30.0 vp-p (v) 54.0 vp-p (v) 32.0 vp-p (v) 2.8 vp-p (v) 122.0 vp-p (h) free datasheet http://www.datasheet-pdf.com/
h kg g2 cv kr g1 g4 hv kb 1 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 1 2 3 4 5 6 1 4 5 6 7 8 9 10 11 12 1 i.c kg kr h kb gnd g1 g2 h fgnd r1710 r1709 c1702 cn1704 cn1701 l1701 d1708 c1705 cn1703 j1701 d1706 d1705 d1704 r1715 r1708 r1706 r1707 c1701 r1712 r1711 r1713 r1714 ic1701 r1720 cn1702 100k 1/2w 100 1/2w 0.0047 2kv e :zzz 6p :s-micro rgp10gpk23 2.2m 160v :zzz :crt 1ss83td 1ss83td 1ss83td 100 1k 1/2w 1k 1/2w 1k 1/2w 10 250v 3.3 2w :rs 2.2 2w :rs 100 100 tda6108q crt drive 560k 1/2w 6p :s-micro crt tp47r tp47b r out b out to a board to a board tab(contact) e r g b ik g2 to a board b in g in r i n g n d ik r o u t g o u t b o u t +b 180v cn502 cn301 t504(fbt) (1p) 9v e e n.c. n.c. v d d 200v b-sv6867-cv crt drive r.g.b. drive g2 focus to a board t504(fbt) heater free datasheet http://www.datasheet-pdf.com/
1 2 c v board waveforms 154.7 v p-p ( h ) 118.8 v p-p ( h ) 142.2 v p-p ( h ) 3 free datasheet http://www.datasheet-pdf.com/
1 2 3 1 2 3 4 5 6 8 9 10 11 1 2 3 4 1 2 s 1 2 1 2 cn5001 cn5002 c5009 r5001 d5002 c5007 c5004 c5006 c5008 r5010 r5007 r5008 d5004 d5005 t5001 d5003 r5050 cn5003 cn5000 r5002 r5003 q5001 q5002 d5001 t5050 c5021 r5012 d5006 d5007 c5010 vdr5050 r5011 r5013 r5009 d5008 c5003 c5020 c5050 c5000 c5002 f5050 erc04-06s sbt era22-08tp3 0.001 0.001 470p 0.001 22 3p wht :s-micro 2p :pin-z 1ss133-t-77 1ss133-t-77 4.7 :fprd 2.2k 10k 680 2.2m 2p 2p :pinz 470k 22m 2sk2845 sw 2sc3311a sw erc04-06s jw (7.5mm) 1k mtzj-t-77-6.2c d1n20r-ta 120 35v 6.8 1/2w :fprd 680 47k d1nl20-ta 0.01 630v 0.0047 125v 0.47 125v 22 250v 22 250v * * ac ac gnd gnd 7.5v ac ac g n d g n d :lightening to a board to a board cn601 to a board cn604 to ac connector (energy start) b-sv6867-e free datasheet http://www.datasheet-pdf.com/
1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 1 2 3 4 5 6 7 1 2 3 cn1402 l1400 ps1400 ps1401 r1401 r1402 c1406 c1401 c1403 cn1401 r1437 ic1400 ic1401 q1400 c1402 c1405 cn1400 c1452 c1453 c1450 c1451 r1433 r1434 r1435 r1436 r1450 r1451 r1452 r1453 c1404 7p (5.0mm) :cfk-i :cfk-i 10k 47k 100 16v 0.22 2200 25v 3p wht :s-micro 22k tda1519aqu tda1519aqu 2sc3311a mute 0.22 100 16v 4p wth :s-micro 0.0022 0.0022 0.33 50v 0.33 50v 2.2k 10k 10k 2.2k 2.7k 2.7k 10k 10k 2200 25v n in v g n d 1 r r o u t 1 g n d 2 o u t 2 n in v g n d 1 r r o u t 1 g n d 2 o u t 2 v p m /s s in v mute au+ au+ au- au- s p r - s p l + s p l - e l e f t in e r ig h t in s p r + spsw v p m /s s in v to a board cn251 b-sv6867- k amp) (audio audio amp audio amp to speakers to hv board cn1406 free datasheet http://www.datasheet-pdf.com/
1 2 3 r2006 r2001 r2002 r2003 r2004 s2005 s2001 s2004 s2003 s2002 s2006 s2007 r2005 cn2201 680 1/4w :rd 820 1/4w :rd 2.2k 1/4w :rd 6.8k 1/4w :rd 10k 1/4w :rd 220 1/4w :rd 3p :pin-z power on e key (cntl) b-sv6867-ht to hv board cn2001 free datasheet http://www.datasheet-pdf.com/
1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 1 2 3 1 2 3 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 9 10 11 v l r c2233 c2234 c2235 d2235 d2236 r1431 r1415 r1417 r1414 r 1 4 1 0 r1406 r1408 r1407 r1404 r1403 r1409 r1433 r1419 r1420 r1421 r1430 r1434 r 1 4 3 5 d2001 cn2200 r2235 r2236 r2238 r2237 r2239 c2068 r2009 r2010 c1413 c 1 4 1 1 c1412 c1410 c1408 c1407 c1409 c1416 c1417 c1418 c1420 c1421 c1422 c1423 c1427 c1429 c1430 c1431 c1419 c1424 c1426 c2236 d2006 ic1403 j2231 r 1 4 1 3 r 1 4 1 2 r1411 cn1405 cn1406 c1425 r1423 r1422 c1428 r1405 r1416 c1415 c1432 c1437 cn2001 ic2003 jw(5mm) 1 1 mtzj-t-77-10b mtzj-t-77-10b 10k 10k 10k 10k 4 7 k 47k 100k 33k 1.5k 4.7k 1k 10k 100k 10k 100k 47k 10k 1 5 k mtzj-t-77-10b 11p wht :s-micro 75 470k 470k 4.7k 4.7k 100 25v jw(5.0mm) jw(5.0mm) 10 1 0 10 10 4700p 0.47 0.47 0.022 200v :ca 4700p 100v 470p 0.015 2200p 4700p 100v 0.47 0.01 0.01 10 0.0047 0.1 0.1 0.1 0.001 200v njm2178l 3p 1 0 k 1 0 k 10k 7p :pin-z 3p wht :s-micro 0.01 100k 10k 0.1 3.9k 10k 100 10 10 3p wht :s-micro sbx1981-51 remote sensor 3 4 1 2 r l v timer to a board key e power on led led c 1 c 2 c 3 c 4 c 5 c 6 c f 1 c f 2 c f 3 m o c 5 m o c 6 m o c 3 m o c 4 m o c 1 m o c 2 v + e m o d e 2 m o d e 1 r o u t l o u t v r e f c in c o u t s in s o u t p n in p n o u t l in r in v2-r v2-v gnd push-b ir e left out right out vcc left in e right in stby to k board cn 1401 s r s 1 s r s 2 b b e from a board cn 253 gnd v2-l power cn250 mpwr/st stby/tim b-sv6867-hv board ht cn2201 to (cntl/audio) stby 5v free datasheet http://www.datasheet-pdf.com/
kv-29al40/kv-29al40a/kv-29al40c 43 6-4. semiconductors e b c e letter side c b e c b 2sa1162-g 2sd601a-q 2sa1175-hfe 2sc2785-hfe 2sa933as-qrt 2sc3209lk 2sd1312-k 2sd774-34 2sc4159-e e c b b c e e b c 2sa1091-0 2sk2845-lb102 2sc5426-01 rd9.1ew free datasheet http://www.datasheet-pdf.com/
kv-29al40/kv-29al40a/kv-29al40c 44 cathode anode b2 e2 c2 c1 e1 b1 { | { | 3 3 1 1 2 2 cathode anode cathode anode cathode anode ma111 mx0541b-f d3sb60f d1nl40-ta2 d10sc4m d1nl20r era22-08tp3 rd6.2esb2 rd8.2esb2 mtzj-3.3 mtzj-5.1c rd5.6esb2 d2s4mf mtzj-t-77-5.1c mtzj-t-77-30d d1nl20-ta egp20g el1z 1ss83 1s133t-77 s2l60f gp08d u05g free datasheet http://www.datasheet-pdf.com/
kv-29al40/kv-29al40a/kv-29al40c 45 23 1-751-057-21 cord, power (w/connector) 10a/125v (kv-29al40) 23 1-783-838-31 cord, power (w/connector) (kv-29al40a) 23 1-769-796-71 cord, power (w/connector) (kv-29al40c) 24 * a-1343-525-a e board (var), mounted (kv-29al40) 24 * a-1343-526-a e board (var), mounted (kv-29al40a/40c) 25 * a-1298-609-a a board, complete (kv-29al40) 25 * a-1298-672-a a board, complete (kv-29al40a) 25 * a-1298-610-a a board, complete (kv-29al40c) 26 * a-1331-776-a cv board (com), mounted 27 * a-1380-582-a k board (var), mounted 28 4-040-387-01 holder (m), dgc 29 4-040-388-01 holder (s), dgc 30 1-416-588-11 coil demagnetic (kv-29al40) 30 1-416-589-21 coil demagnetic (kv-29al40a/40c) 31 4-036-329-01 spring (b), tension 32 1-900-802-13 connector assy, 4p 33 1-766-374-11 plug, f-pin 34 4-064-762-01 cover, rear 35 4-062-047-01 piece a (110), conv correct 37 * 1-900-802-39 connector assy, 6 pin 38 * a-1372-483-a hv board (var), mounted 39 8-598-431-00 tuner, fss btf-wa411 1 x-4035-965-1 beznet assy (kv-29al40/c) 2-4 1 x-4035-963-1 beznet assy (kv-29al40a) 2-4 2 4-046-160-01 emblem (no.9), sony 3 4-064-768-01 door 4 4-064-767-01 guide, led 7 4-064-764-01 bracket, top control 8 4-064-763-01 panel, top control 9 4-064-765-01 button, top control 10 * a-1372-482-a ht board, mounted 12 x-4035-964-1 baffle assy, speaker 13 13 4-374-745-31 cushion (a) 14 1-505-993-11 speaker (8x13cm) 15 4-041-268-01 screw (7), tapping 16 1-452-032-00 magnet, disc 18 4-053-005-01 spacer, dy 19 8-733-873-05 crt 29nx (kv-29al40) 19 8-733-874-05 crt 29nx (kv-29al40a/40c) 20 3-704-372-31 holder, hv cable 21 8-451-486-21 dy y29nxa-v2 22 1-453-268-11 transformer, fbt assy nx4005//x4j4 ref.no. part no. description remark ref.no. part no. description remark section 7 exploded views 7-1. chassis 15 19 21 18 26 15 19 21 18 26 22 2 1 3 29 28 12 13 14 31 30 24 22 25 38 16 35 34 23 27 37 32 33 20 7 8 9 10 13 14 12 4 39 resistors ? all resistors are in ohms ? f : nonflammable capacitors ? mf = f inductors ? uh = h, mmh = mh the components identified by shading and mark are critical for safety. replace only with part number specified. note: note: les composants identifies per un trame et une marque sont critiques pour la securite. ne les remplacer que par une piece portant le numero specifie. ? items marked " * " are not stocked since they are seldom required for routine service. some delay should be ant icipated when ordering these items. ? all variable and adjustable resistors have characteristic curve b, unless otherwise noted. ! ! when indicating parts by reference number, please include the board name. 7-685-663-79 screw +bvtp 4x16 7-685-648-79 screw +bvtp 3x12 ! ! ! ! ! ! ! ! ! ! ! ! free datasheet http://www.datasheet-pdf.com/
kv-29al40/kv-29al40a/kv-29al40c 46 ref.no. part no. description remark the components identified with gray shading and a critical symbol ( ) are critical for safety. replace only with part number specified. les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. 7-2. main power switch (kv-29al40a) ! ! 51 4-062-611-01 button, main power 52 * 4-062-612-01 bracket, main power 53 * a-1372-117-a hz board, mounted 52 51 53 free datasheet http://www.datasheet-pdf.com/
? 47 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c resistors ? all resistors are in ohms ? f : nonflammable capacitors ? mf = f inductors ? uh = h, mmh = mh the components identified by shading and mark are critical for safety. replace only with part number specified. note: note: les composants identifies per un trame et une marque sont critiques pour la securite. ne les remplacer que par une piece portant le numero specifie. ? items marked " * " are not stocked since they are seldom required for routine service. some delay should be ant icipated when ordering these items. ? all variable and adjustable resistors have characteristic curve b, unless otherwise noted. when indicating parts by reference number, please include the board name. 47 ! ! ref.no. part no. description remark ref.no. part no. description remark * a-1298-609-a a board, complete (kv-29al40) * a-1298-672-a a board, complete (kv-29al40a) * a-1298-610-a a board, complete (kv-29al40c) 4-382-854-01 screw (m3x8), p, sw (+) 4-382-854-11 screw (m3x10), p, sw (+) capacitor c001 1-163-259-91 ceramic chip 220pf 5% 50v c005 1-126-960-11 elect 1mf 20% 50v c007 1-163-259-91 ceramic chip 220pf 5% 50v c008 1-163-009-11 ceramic chip 0.001mf 10% 50v c010 1-163-009-11 ceramic chip 0.001mf 10% 50v c011 1-163-009-11 ceramic chip 0.001mf 10% 50v c012 1-163-009-11 ceramic chip 0.001mf 10% 50v c014 1-164-004-11 ceramic chip 0.1mf 10% 25v c017 1-126-960-11 elect 1mf 20% 50v c019 1-163-135-00 ceramic chip 560pf 5% 50v c020 1-130-495-00 film 0.1mf 5% 50v c021 1-163-259-91 ceramic chip 220pf 5% 50v c028 1-163-005-11 ceramic chip 470pf 10% 50v c034 1-163-037-11 ceramic chip 0.022mf 10% 50v c037 1-164-161-11 ceramic chip 0.0022mf 10% 50v c038 1-126-941-11 elect 470mf 20% 25v c039 1-126-964-11 elect 10mf 20% 50v c046 1-104-664-11 elect 47mf 20% 25v c047 1-163-259-91 ceramic chip 220pf 5% 50v c048 1-163-009-11 ceramic chip 0.001mf 10% 50v c060 1-163-005-11 ceramic chip 470pf 10% 50v c062 1-164-161-11 ceramic chip 0.0022mf 10% 50v c065 1-163-009-11 ceramic chip 0.001mf 10% 50v c070 1-163-259-91 ceramic chip 220pf 5% 50v c091 1-163-231-11 ceramic chip 15pf 5% 50v c092 1-163-231-11 ceramic chip 15pf 5% 50v c101 1-126-963-11 elect 4.7mf 20% 50v c102 1-126-382-11 elect 100mf 20% 16v c150 1-126-941-11 elect 470mf 20% 25v c151 1-104-664-11 elect 47mf 20% 25v c207 1-126-959-11 elect 0.47mf 20% 50v c208 1-126-959-11 elect 0.47mf 20% 50v c209 1-126-963-11 elect 4.7mf 20% 50v c211 1-126-964-11 elect 10mf 20% 50v c212 1-126-963-11 elect 4.7mf 20% 50v c213 1-126-964-11 elect 10mf 20% 50v c218 1-126-941-11 elect 470mf 20% 25v c219 1-130-495-00 film 0.1mf 5% 50v c222 1-126-964-11 elect 10mf 20% 50v c223 1-104-664-11 elect 47mf 20% 25v c225 1-163-017-00 ceramic chip 0.0047mf 10% 50v c226 1-126-963-11 elect 4.7mf 20% 50v c256 1-126-960-11 elect 1mf 20% 50v c257 1-126-960-11 elect 1mf 20% 50v c258 1-126-959-11 elect 0.47mf 20% 50v c284 1-104-664-11 elect 47mf 20% 25v c285 1-126-235-11 elect 100mf 20% 16v c286 1-163-251-11 ceramic chip 100pf 5% 50v c287 1-126-959-11 elect 0.47mf 20% 50v c288 1-126-960-11 elect 1mf 20% 50v c289 1-126-960-11 elect 1mf 20% 50v c290 1-164-005-11 ceramic chip 0.47mf 25v c300 1-163-233-11 ceramic chip 18pf 5% 50v (kv-29al40a) c301 1-163-099-00 ceramic chip 18pf 5% 50v c302 1-163-233-11 ceramic chip 18pf 5% 50v (kv-29al40a) c303 1-126-963-11 elect 4.7mf 20% 50v c305 1-164-004-11 ceramic chip 0.1mf 10% 25v c306 1-164-004-11 ceramic chip 0.1mf 10% 25v c307 1-126-964-11 elect 10mf 20% 50v (kv-29al40/kv-29al40c) c308 1-126-964-11 elect 10mf 20% 50v c309 1-163-021-91 ceramic chip 0.01mf 10% 50v (kv-29al40/kv-29al40c) c309 1-163-017-00 ceramic chip 0.0047mf 10% 50v (kv-29al40a) c310 1-126-960-11 elect 1mf 20% 50v c311 1-163-021-91 ceramic chip 0.01mf 10% 50v c312 1-126-942-61 elect 1000mf 20% 25v c313 1-163-021-91 ceramic chip 0.01mf 10% 50v a a section 8 electrical parts list free datasheet http://www.datasheet-pdf.com/
? 48 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c c314 1-163-003-11 ceramic chip 330pf 10% 50v (kv-29al40/kv-29al40c) c316 1-163-021-91 ceramic chip 0.01mf 10% 50v c317 1-163-021-91 ceramic chip 0.01mf 10% 50v c318 1-163-021-91 ceramic chip 0.01mf 10% 50v c319 1-126-963-11 elect 4.7mf 20% 50v c320 1-126-959-11 elect 0.47mf 20% 50v (kv-29al40/kv-29al40c) c320 1-126-957-11 elect 0.22mf 20% 50v (kv-29al40a) c321 1-163-133-00 ceramic chip 470pf 5% 50v (kv-29al40/kv-29al40c) c321 1-163-259-91 ceramic chip 220pf 5% 50v (kv-29al40a) c323 1-163-243-11 ceramic chip 47pf 5% 50v (kv-29al40/kv-29al40c) c324 1-163-251-11 ceramic chip 100pf 5% 50v (kv-29al40/kv-29al40c) c330 1-163-003-11 ceramic chip 330pf 10% 50v c331 1-163-005-11 ceramic chip 470pf 10% 50v (kv-29al40/kv-29al40c) c332 1-163-009-11 ceramic chip 0.001mf 10% 50v (kv-29al40/kv-29al40c) c350 1-163-021-91 ceramic chip 0.01mf 10% 50v (kv-29al40/kv-29al40c) c351 1-126-964-11 elect 10mf 20% 50v (kv-29al40/kv-29al40c) c352 1-163-021-91 ceramic chip 0.01mf 10% 50v (kv-29al40/kv-29al40c) c353 1-163-038-91 ceramic chip 0.1mf 25v (kv-29al40/kv-29al40c) c354 1-163-038-91 ceramic chip 0.1mf 25v (kv-29al40/kv-29al40c) c355 1-164-222-11 ceramic chip 0.22mf 25v (kv-29al40/kv-29al40c) c356 1-163-038-91 ceramic chip 0.1mf 25v (kv-29al40/kv-29al40c) c357 1-163-021-91 ceramic chip 0.01mf 10% 50v (kv-29al40/kv-29al40c) c358 1-104-664-11 elect 47mf 20% 25v (kv-29al40/kv-29al40c) c359 1-163-021-91 ceramic chip 0.01mf 10% 50v (kv-29al40/kv-29al40c) c360 1-163-021-91 ceramic chip 0.01mf 10% 50v (kv-29al40/kv-29al40c) c361 1-163-037-11 ceramic chip 0.022mf 10% 50v (kv-29al40/kv-29al40c) c362 1-126-964-11 elect 10mf 20% 50v (kv-29al40/kv-29al40c) c373 1-163-038-91 ceramic chip 0.1mf 25v c374 1-126-935-11 elect 470mf 20% 16v a c375 1-163-038-91 ceramic chip 0.1mf 25v c376 1-104-664-11 elect 47mf 20% 25v c377 1-126-964-11 elect 10mf 20% 50v c380 1-163-021-91 ceramic chip 0.01mf 10% 50v c381 1-163-021-91 ceramic chip 0.01mf 10% 50v c382 1-163-021-91 ceramic chip 0.01mf 10% 50v c390 1-126-959-11 elect 0.47mf 20% 50v c400 1-126-963-11 elect 4.7mf 20% 50v c401 1-126-956-91 elect 0.1mf 20% 50v c402 1-163-017-00 ceramic chip 0.0047mf 10% 50v c403 1-126-963-11 elect 4.7mf 20% 50v c404 1-126-963-11 elect 4.7mf 20% 50v c405 1-126-963-11 elect 4.7mf 20% 50v c406 1-126-963-11 elect 4.7mf 20% 50v c407 1-126-964-11 elect 10mf 20% 50v c410 1-126-963-11 elect 4.7mf 20% 50v c411 1-126-956-91 elect 0.1mf 20% 50v c412 1-130-495-00 film 0.1mf 5% 50v c413 1-126-967-11 elect 47mf 20% 50v c414 1-163-017-00 ceramic chip 0.0047mf 10% 50v c415 1-126-956-91 elect 0.1mf 20% 50v c416 1-126-963-11 elect 4.7mf 20% 50v c418 1-126-964-11 elect 10mf 20% 50v c420 1-126-960-11 elect 1mf 20% 50v c501 1-102-112-00 ceramic 330pf 10% 50v c502 1-106-383-00 mylar 0.047mf 10% 200v c503 1-102-212-00 ceramic 820pf 10% 500v c504 1-102-002-00 ceramic 680pf 10% 500v c505 ! 1-162-134-11 ceramic 470pf 10% 2kv c507 ! 1-119-969-11 mylar 14000pf 3% 2kv c508 ! 1-107-364-11 mylar 0.01mf 10% 200v c509 ! 1-162-116-00 ceramic 680pf 10% 2kv c510 1-107-649-11 elect 2.2mf 20% 250v c511 ! 1-117-673-11 film 1.5mf 5% 200v c512 1-106-395-00 mylar 0.15mf 10% 200v c513 1-106-343-00 mylar 0.001mf 10% 100v c514 1-117-891-11 film 0.62mf 5% 200v c515 ! 1-162-116-00 ceramic 680pf 10% 2kv c520 ! 1-129-722-00 film 0.047mf 5% 630v c521 1-164-646-11 ceramic 2200pf 10% 500v c524 1-102-244-00 ceramic 220pf 10% 500v c525 1-162-815-11 ceramic 47pf 5% 500v c526 1-126-960-11 elect 1mf 20% 50v c527 1-126-965-11 elect 22mf 20% 50v c528 1-164-695-11 ceramic chip 0.0022mf 5% 50v c529 1-164-161-11 ceramic chip 0.0022mf 10% 50v c530 1-163-009-11 ceramic chip 0.001mf 10% 50v free datasheet http://www.datasheet-pdf.com/
? 49 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c c531 1-106-387-00 mylar 0.068mf 10% 200v c541 1-126-969-11 elect 220mf 20% 50v c542 1-126-967-11 elect 47mf 20% 50v c543 1-137-194-81 film 0.47mf 5% 50v c553 1-107-662-11 elect 22mf 20% 250v c555 1-164-161-11 ceramic chip 0.0022mf 10% 50v c562 1-126-941-11 elect 470mf 20% 25v c564 1-126-941-11 elect 470mf 20% 25v c571 1-126-964-11 elect 10mf 20% 50v c573 1-126-963-11 elect 4.7mf 20% 50v c574 1-107-635-11 elect 4.7mf 20% 160v c575 1-163-021-91 ceramic chip 0.01mf 10% 50v c576 1-123-024-21 elect 33mf 160v c581 1-126-963-11 elect 4.7mf 20% 50v c591 1-137-417-11 mylar 0.0047mf 10% 200v c606 ! 1-117-894-11 elect 560mf 20% 250v c607 ! 1-117-894-11 elect 560mf 20% 250v c610 1-137-194-81 film 0.47mf 5% 50v c611 1-137-194-81 film 0.47mf 5% 50v c612 1-164-735-11 ceramic 0.0015mf 10% 500v c613 1-164-625-11 ceramic 680pf 10% 500v c614 ! 1-129-718-00 film 0.022mf 5% 630v c615 1-136-169-00 film 0.22mf 5% 50v c616 1-136-169-00 film 0.22mf 5% 50v c617 1-165-127-11 ceramic 470pf 10% 500v c618 1-165-127-11 ceramic 470pf 10% 500v c619 1-123-024-21 elect 33mf 160v c620 1-126-942-61 elect 1000mf 20% 25v c621 1-126-941-11 elect 470mf 20% 25v c623 1-137-368-11 film 0.0047mf 5% 50v c624 1-137-417-11 mylar 0.0047mf 10% 200v c626 1-104-665-11 elect 100mf 20% 25v c629 1-104-665-11 elect 100mf 20% 25v c632 1-126-964-11 elect 10mf 20% 50v c651 1-164-645-11 ceramic 1000pf 10% 500v c653 1-104-664-11 elect 47mf 20% 25v c654 1-126-382-11 elect 100mf 20% 16v c690 1-126-959-11 elect 0.47mf 20% 50v c691 1-126-941-11 elect 470mf 20% 25v c692 1-104-664-11 elect 47mf 20% 25v c693 1-137-194-81 film 0.47mf 5% 50v filter cf001 1-767-487-11 vibrator, crystal (kv-29al40/kv-29al40a) connector cn101 1-508-786-00 pin, connector (5mm pitch) 2p cn203 * 1-560-124-00 plug, connector (2.5mm) 4p cn250 * 1-564-514-11 plug, connector 11p cn251 1-564-510-11 plug, connector 7p cn253 1-564-510-11 plug, connector 7p cn301 * 1-564-509-11 plug, connector 6p cn501 * 1-580-798-11 connector pin (dy) 6p cn502 * 1-564-509-11 plug, connector 6p cn601 * 1-580-843-11 pin, connector (power) cn602 1-508-786-00 pin, connector (5mm pitch) 2p cn604 * 1-564-506-11 plug, connector 3p diode d001 8-719-921-44 diode mtzj-5.1c d003 8-719-991-33 diode 1ss133t-77 d004 8-719-991-33 diode 1ss133t-77 d005 8-719-109-89 diode rd5.6esb2 d080 8-719-991-33 diode 1ss133t-77 d205 8-719-982-22 diode mtzj-30d d207 8-719-109-66 diode rd3.3esb2 d208 8-719-982-96 diode mtzj-t-77-2.2a d254 8-719-110-17 diode rd10esb2 d255 8-719-110-17 diode rd10esb2 d302 8-719-921-44 diode mtzj-5.1c d303 8-719-991-33 diode 1ss133t-77 d305 8-719-404-49 diode ma111 d306 8-719-404-49 diode ma111 d403 8-719-991-33 diode 1ss133t-77 d501 8-719-945-80 diode erc06-15s d502 8-719-908-03 diode gp08d d503 8-719-908-03 diode gp08d d520 8-719-067-63 diode mdv04-600rl d521 8-719-302-43 diode el1z d522 8-719-991-33 diode 1ss133t-77 d523 8-719-991-33 diode 1ss133t-77 d541 8-719-908-03 diode gp08d d550 8-719-110-08 diode rd8.2esb2 d551 8-719-991-33 diode 1ss133t-77 d552 8-719-302-43 diode el1z d561 8-719-979-85 diode egp20g d562 8-719-979-85 diode egp20g d571 8-719-991-33 diode 1ss133t-77 d572 8-719-991-33 diode 1ss133t-77 d573 8-719-110-08 diode rd8.2esb2 d574 ! 8-719-302-43 diode el1z d581 8-719-991-33 diode 1ss133t-77 d601 8-719-510-51 diode d3sb60f d602 8-719-991-33 diode 1ss133t-77 d604 8-719-060-90 diode s2l60f a free datasheet http://www.datasheet-pdf.com/
? 50 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c d605 8-719-060-90 diode s2l60f d610 ! 8-719-057-52 diode ez0150av1 d615 8-719-510-12 diode d10sc4m d618 8-719-022-97 diode d2s4mf d620 8-719-022-97 diode d2s4mf d621 8-719-052-90 diode d1nl40-ta2 d622 8-719-052-90 diode d1nl40-ta2 d650 8-719-109-89 diode rd5.6esb2 d670 8-719-991-33 diode 1ss133t-77 d690 8-719-991-33 diode 1ss133t-77 d691 8-719-991-33 diode 1ss133t-77 ferrite bead fb350 1-216-295-91 short 0 (kv-29al40/kv-29al40c) fb501 1-410-396-41 ferrite 0.45uh fb521 1-410-397-21 ferrite 1.1uh fb522 1-410-397-21 ferrite 1.1uh fb601 1-410-396-41 ferrite 0.45uh fb602 1-410-396-41 ferrite 0.45uh fb603 1-412-911-11 ferrite 0uh fb605 1-412-911-11 ferrite 0uh ic ic001 8-759-562-90 ic m37273mf-251sp ic002 8-759-371-21 ic mm1319afbe ic003 8-759-353-44 ic st24c08fm6tr ic202 8-759-100-96 ic upc4558g2 ic203 8-759-534-81 ic mm1313ad/ ic301 8-752-083-09 ic cxa2061s (kv-29al40/kv-29al40c) ic301 8-752-082-35 ic cxa2061s (kv-29al40c) ic302 8-752-385-80 ic cxd2073s (kv-29al40/kv-29al40c) ic402 8-752-072-39 ic cxa2021s ic521 ! 8-759-700-07 ic njm2903m ic541 8-759-980-58 ic tda8172 ic601 ! 8-729-039-65 transistor mx0541b-f ic603 ! 8-749-012-13 ic dm-58 ic604 8-759-198-03 ic pq09rf21 jack j200 1-774-750-21 jack block, pin 2p j201 1-774-749-11 jack block, pin chip conductor jr001 1-216-295-91 short 0 jr003 1-216-295-91 short 0 jr277 1-216-295-91 short 0 jr301 1-216-295-91 short 0 jr344 1-216-295-91 short 0 coil l001 1-410-470-11 inductor 10uh l002 1-412-032-11 inductor chip 100uh l003 1-412-032-11 inductor chip 100uh l101 1-412-029-11 inductor chip 10uh l150 1-412-032-11 inductor chip 100uh l151 1-412-029-11 inductor chip 10uh l301 1-412-031-11 inductor chip 47uh l302 1-412-029-11 inductor chip 10uh l350 1-412-029-11 inductor chip 10uh (kv-29al40/kv-29al40c) l351 1-412-031-11 inductor chip 47uh (kv-29al40/kv-29al40c) l501 ! 1-411-976-11 coil horizontal linearity l502 1-412-552-11 inductor 2.2mmh l503 1-406-677-11 inductor 0uh l504 1-412-533-21 inductor 47uh l520 1-409-955-11 inductor 0uh l591 ! 1-412-528-61 inductor 18uh ic link ps201 1-532-984-11 link, ic 2a/90v transistor q001 8-729-216-22 transistor 2sa1162-g q002 8-729-422-27 transistor 2sd601a-q q081 8-729-216-22 transistor 2sa1162-g q200 8-729-422-27 transistor 2sd601a-q q201 8-729-422-27 transistor 2sd601a-q q203 8-729-119-76 transistor 2sa1175-hfe q204 8-729-422-27 transistor 2sd601a-q q286 8-729-216-22 transistor 2sa1162-g q287 8-729-216-22 transistor 2sa1162-g q288 8-729-422-27 transistor 2sd601a-q q300 8-729-422-27 transistor 2sd601a-q q302 8-729-422-27 transistor 2sd601a-q q305 8-729-216-22 transistor 2sa1162-g q306 8-729-216-22 transistor 2sa1162-g q307 8-729-216-22 transistor 2sa1162-g q308 8-729-216-22 transistor 2sa1162-g q309 8-729-216-22 transistor 2sa1162-g q310 8-729-216-22 transistor 2sa1162-g q350 8-729-216-22 transistor 2sa1162-g (kv-29al40/kv-29al40c) a free datasheet http://www.datasheet-pdf.com/
? 51 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c q351 8-729-422-27 transistor 2sd601a-q (kv-29al40/kv-29al40c) q352 8-729-216-22 transistor 2sa1162-g (kv-29al40/kv-29al40c) q353 8-729-216-22 transistor 2sa1162-g (kv-29al40/kv-29al40c) q354 8-729-216-22 transistor 2sa1162-g (kv-29al40/kv-29al40c) q355 8-729-422-27 transistor 2sd601a-q (kv-29al40/kv-29al40c) q356 8-729-216-22 transistor 2sa1162-g (kv-29al40/kv-29al40c) q357 8-729-216-22 transistor 2sa1162-g (kv-29al40/kv-29al40c) q358 8-729-422-27 transistor 2sd601a-q (kv-29al40/kv-29al40c) q359 8-729-216-22 transistor 2sa1162-g (kv-29al40/kv-29al40c) q360 8-729-216-22 transistor 2sa1162-g (kv-29al40/kv-29al40c) q400 8-729-422-27 transistor 2sd601a-q q501 8-729-140-50 transistor 2sc3209lk q502 8-729-043-43 transistor 2sc5426-01 q521 8-729-422-27 transistor 2sd601a-q q522 8-729-809-29 transistor 2sc4159-e q550 8-729-119-78 transistor 2sc2785-hfe q555 8-729-422-27 transistor 2sd601a-q q571 8-729-200-17 transistor 2sa1091-o q601 8-729-119-78 transistor 2sc2785-hfe q604 8-729-119-78 transistor 2sc2785-hfe q608 8-729-119-76 transistor 2sa1175-hfe q650 8-729-111-55 transistor 2sd1312-k q670 8-729-140-96 transistor 2sd774-34 resistor r001 1-216-033-00 res, chip 220 5% 1/10w r002 1-216-073-00 res, chip 10k 5% 1/10w r003 1-216-033-00 res, chip 220 5% 1/10w r004 1-216-073-00 res, chip 10k 5% 1/10w r005 1-216-025-91 res, chip 100 5% 1/10w r006 1-216-049-91 res, chip 1k 5% 1/10w r007 1-216-025-91 res, chip 100 5% 1/10w r008 1-216-033-00 res, chip 220 5% 1/10w r010 1-216-033-00 res, chip 220 5% 1/10w r011 1-216-033-00 res, chip 220 5% 1/10w r013 1-216-081-00 res, chip 22k 5% 1/10w r016 1-216-041-00 res, chip 470 5% 1/10w r017 1-216-113-00 res, chip 470k 5% 1/10w r018 1-216-049-91 res, chip 1k 5% 1/10w r019 1-249-425-11 carbon 4.7k 5% 1/4w r025 1-249-426-11 carbon 5.6k 5% 1/4w r026 1-249-426-11 carbon 5.6k 5% 1/4w r027 1-249-426-11 carbon 5.6k 5% 1/4w r028 1-216-049-91 res, chip 1k 5% 1/10w r031 1-216-045-00 res, chip 680 5% 1/10w r032 1-247-815-91 carbon 220 5% 1/4w r033 1-247-815-91 carbon 220 5% 1/4w r034 1-216-033-00 res, chip 220 5% 1/10w r035 1-216-033-00 res, chip 220 5% 1/10w r038 1-216-049-91 res, chip 1k 5% 1/10w r040 1-249-413-11 carbon 470 5% 1/4w r043 1-249-417-11 carbon 1k 5% 1/4w r044 1-247-815-91 carbon 220 5% 1/4w r045 1-216-065-91 res, chip 4.7k 5% 1/10w r046 1-247-815-91 carbon 220 5% 1/4w r047 1-216-065-91 res, chip 4.7k 5% 1/10w r048 1-216-025-91 res, chip 100 5% 1/10w r049 1-216-089-91 res, chip 47k 5% 1/10w r050 1-216-073-00 res, chip 10k 5% 1/10w r051 1-216-033-00 res, chip 220 5% 1/10w r054 1-216-073-00 res, chip 10k 5% 1/10w r056 1-249-425-11 carbon 4.7k 5% 1/4w r057 1-216-065-91 res, chip 4.7k 5% 1/10w r058 1-216-065-91 res, chip 4.7k 5% 1/10w r070 1-249-425-11 carbon 4.7k 5% 1/4w r071 1-216-065-91 res, chip 4.7k 5% 1/10w r073 1-249-425-11 carbon 4.7k 5% 1/4w r074 1-216-073-00 res, chip 10k 5% 1/10w r075 1-216-073-00 res, chip 10k 5% 1/10w r076 1-216-121-91 res, chip 1m 5% 1/10w r077 1-216-097-91 res, chip 100k 5% 1/10w r081 1-249-413-11 carbon 470 5% 1/4w (kv29al40a) r085 1-216-049-91 res, chip 1k 5% 1/10w r086 1-216-045-00 res, chip 680 5% 1/10w r087 1-216-045-00 res, chip 680 5% 1/10w r088 1-216-045-00 res, chip 680 5% 1/10w r091 1-216-073-00 res, chip 10k 5% 1/10w r092 1-216-073-00 res, chip 10k 5% 1/10w r096 1-216-045-00 res, chip 680 5% 1/10w r101 1-216-073-00 res, chip 10k 5% 1/10w r150 1-216-025-91 res, chip 100 5% 1/10w r151 1-216-025-91 res, chip 100 5% 1/10w r203 1-216-025-91 res, chip 100 5% 1/10w r204 1-216-043-91 res, chip 560 5% 1/10w r205 1-216-043-91 res, chip 560 5% 1/10w r207 1-216-025-91 res, chip 100 5% 1/10w r209 1-216-025-91 res, chip 100 5% 1/10w a free datasheet http://www.datasheet-pdf.com/
? 52 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c r210 1-216-073-00 res, chip 10k 5% 1/10w r213 1-216-057-00 res, chip 2.2k 5% 1/10w r214 1-216-113-00 res, chip 470k 5% 1/10w r215 1-216-033-00 res, chip 220 5% 1/10w r216 1-216-113-00 res, chip 470k 5% 1/10w r217 1-216-033-00 res, chip 220 5% 1/10w r218 1-216-067-00 res, chip 5.6k 5% 1/10w r219 1-216-073-00 res, chip 10k 5% 1/10w r220 1-216-073-00 res, chip 10k 5% 1/10w r221 1-216-073-00 res, chip 10k 5% 1/10w r222 1-216-067-00 res, chip 5.6k 5% 1/10w r223 1-216-073-00 res, chip 10k 5% 1/10w r224 1-216-073-00 res, chip 10k 5% 1/10w r225 1-216-073-00 res, chip 10k 5% 1/10w r226 1-249-425-11 carbon 4.7k 5% 1/4w r227 1-216-097-91 res, chip 100k 5% 1/10w r228 1-216-065-91 res, chip 4.7k 5% 1/10w r229 1-216-097-91 res, chip 100k 5% 1/10w r230 1-216-073-00 res, chip 10k 5% 1/10w r241 1-216-065-91 res, chip 4.7k 5% 1/10w r242 1-216-083-00 res, chip 27k 5% 1/10w r243 1-216-689-11 res, chip 39k 5% 1/10w r244 1-216-049-91 res, chip 1k 5% 1/10w r245 1-216-049-91 res, chip 1k 5% 1/10w r249 1-216-025-91 res, chip 100 5% 1/10w r250 1-216-033-00 res, chip 220 5% 1/10w r251 1-216-025-91 res, chip 100 5% 1/10w r253 1-215-899-11 metal oxide 15k 5% 2w f r256 1-216-033-00 res, chip 220 5% 1/10w r257 1-249-429-11 carbon 10k 5% 1/4w r258 1-216-033-00 res, chip 220 5% 1/10w r259 1-216-033-00 res, chip 220 5% 1/10w r263 1-247-815-91 carbon 220 5% 1/4w r264 1-247-815-91 carbon 220 5% 1/4w r270 1-216-022-00 res, chip 75 5% 1/10w r271 1-216-113-00 res, chip 470k 5% 1/10w r272 1-216-113-00 res, chip 470k 5% 1/10w r273 1-216-065-91 res, chip 4.7k 5% 1/10w r274 1-216-065-91 res, chip 4.7k 5% 1/10w r279 1-249-425-11 carbon 4.7k 5% 1/4w r297 1-216-043-91 res, chip 560 5% 1/10w r298 1-216-041-00 res, chip 470 5% 1/10w r299 1-249-425-11 carbon 4.7k 5% 1/4w r300 1-216-295-91 short 0 (kv-29al40a) r302 1-216-295-91 short 0 (kv-29al40a) r304 1-216-073-00 res, chip 10k 5% 1/10w r305 1-216-033-00 res, chip 220 5% 1/10w r306 1-208-806-11 res, chip 10k 0.50% 1/10w r307 1-216-065-91 res, chip 4.7k 5% 1/10w (kv-29al40/kv-29al40c) r307 1-216-075-00 res, chip 12k 5% 1/10w (kv-29al40a) r308 1-216-025-91 res, chip 100 5% 1/10w (kv-29al40/kv-29al40c) r310 1-216-049-91 res, chip 1k 5% 1/10w r312 1-216-033-00 res, chip 220 5% 1/10w r313 1-216-033-00 res, chip 220 5% 1/10w r314 1-216-033-00 res, chip 220 5% 1/10w r315 1-216-033-00 res, chip 220 5% 1/10w r316 1-247-807-31 carbon 100 5% 1/4w r317 1-216-025-91 res, chip 100 5% 1/10w (kv-29al40/kv-29al40c) r318 1-216-025-91 res, chip 100 5% 1/10w (kv-29al40/kv-29al40c) r319 1-216-073-00 res, chip 10k 5% 1/10w r320 1-247-807-31 carbon 100 5% 1/4w (kv-29al40/kv-29al40c) r321 1-216-025-91 res, chip 100 5% 1/10w (kv-29al40/kv-29al40c) r322 1-216-025-91 res, chip 100 5% 1/10w (kv-29al40/kv-29al40c) r323 1-216-037-00 res, chip 330 5% 1/10w r324 1-216-065-91 res, chip 4.7k 5% 1/10w r328 1-247-807-31 carbon 100 5% 1/4w r329 1-216-025-91 res, chip 100 5% 1/10w r330 1-216-025-91 res, chip 100 5% 1/10w r331 1-216-025-91 res, chip 100 5% 1/10w r333 1-216-049-91 res, chip 1k 5% 1/10w r334 1-216-025-91 res, chip 100 5% 1/10w (kv-29al40/kv-29al40c) r335 1-216-057-00 res, chip 2.2k 5% 1/10w r336 1-216-057-00 res, chip 2.2k 5% 1/10w r337 1-216-057-00 res, chip 2.2k 5% 1/10w r340 1-249-417-11 carbon 1k 5% 1/4w r341 1-216-073-00 res, chip 10k 5% 1/10w r342 1-216-069-00 res, chip 6.8k 5% 1/10w r343 1-216-129-00 res, chip 2.2m 5% 1/10w (kv-29al40/kv-29al40c) r345 1-216-129-00 res, chip 2.2m 5% 1/10w (kv-29al40/kv-29al40c) r346 1-216-129-00 res, chip 2.2m 5% 1/10w (kv-29al40/kv-29al40c) r347 1-216-049-91 res, chip 1k 5% 1/10w r350 1-208-766-11 res, chip 220 0.50% 1/10w (kv-29al40/kv-29al40c) r351 1-208-766-11 res, chip 220 0.50% 1/10w (kv-29al40/kv-29al40c) a free datasheet http://www.datasheet-pdf.com/
? 53 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c r352 1-208-794-11 res, chip 3.3k 0.50% 1/10w (kv-29al40/kv-29al40c) r353 1-216-295-91 short 0 (kv-29al40/kv-29al40c) r354 1-208-794-11 res, chip 3.3k 0.50% 1/10w (kv-29al40/kv-29al40c) r355 1-216-295-91 short 0 (kv-29al40/kv-29al40c) r356 1-216-059-00 res, chip 2.7k 5% 1/10w r357 1-216-091-00 res, chip 56k 5% 1/10w (kv-29al40/kv-29al40c) r358 1-216-043-91 res, chip 560 5% 1/10w (kv-29al40/kv-29al40c) r359 1-216-057-00 res, chip 2.2k 5% 1/10w (kv-29al40/kv-29al40c) r360 1-216-295-91 short 0 r361 1-216-049-91 res, chip 1k 5% 1/10w (kv-29al40/kv-29al40c) r362 1-216-043-91 res, chip 560 5% 1/10w (kv-29al40/kv-29al40c) r363 1-216-037-00 res, chip 330 5% 1/10w (kv-29al40/kv-29al40c) r364 1-216-025-91 res, chip 100 5% 1/10w (kv-29al40/kv-29al40c) r365 1-216-025-91 res, chip 100 5% 1/10w (kv-29al40/kv-29al40c) r366 1-216-053-00 res, chip 1.5k 5% 1/10w (kv-29al40/kv-29al40c) r367 1-216-057-00 res, chip 2.2k 5% 1/10w (kv-29al40/kv-29al40c) r368 1-216-033-00 res, chip 220 5% 1/10w (kv-29al40/kv-29al40c) r369 1-216-041-00 res, chip 470 5% 1/10w (kv-29al40/kv-29al40c) r370 1-216-033-00 res, chip 220 5% 1/10w r372 1-216-035-00 res, chip 270 5% 1/10w (kv-29al40/kv-29al40c) r373 1-216-025-91 res, chip 100 5% 1/10w (kv-29al40/kv-29al40c) r374 1-216-025-91 res, chip 100 5% 1/10w (kv-29al40/kv-29al40c) r375 1-216-053-00 res, chip 1.5k 5% 1/10w (kv-29al40/kv-29al40c) r376 1-216-049-91 res, chip 1k 5% 1/10w (kv-29al40/kv-29al40c) r377 1-216-049-91 res, chip 1k 5% 1/10w (kv-29al40/kv-29al40c) r378 1-216-041-00 res, chip 470 5% 1/10w (kv-29al40/kv-29al40c) r379 1-216-049-91 res, chip 1k 5% 1/10w (kv-29al40/kv-29al40c) r380 1-208-790-11 res, chip 2.2k 0.50% 1/10w (kv-29al40/kv-29al40c) r381 1-216-053-00 res, chip 1.5k 5% 1/10w (kv-29al40/kv-29al40c) r387 1-216-067-00 res, chip 5.6k 5% 1/10w r388 8-719-976-99 diode dtz5.1b r399 1-216-295-91 short 0 r400 1-247-863-91 carbon 22k 5% 1/4w r401 1-216-097-91 res, chip 100k 5% 1/10w r402 1-216-121-91 res, chip 1m 5% 1/10w r403 1-247-815-91 carbon 220 5% 1/4w r404 1-247-815-91 carbon 220 5% 1/4w r405 1-216-097-91 res, chip 100k 5% 1/10w r406 1-216-025-91 res, chip 100 5% 1/10w r432 1-249-429-11 carbon 10k 5% 1/4w r502 1-215-892-11 metal oxide 1k 5% 2w f r503 1-249-426-11 carbon 5.6k 5% 1/4w f r504 1-216-349-00 metal oxide 1 5% 1w f r505 1-249-401-11 carbon 47 5% 1/4w r506 1-215-860-11 metal oxide 33 5% 1w f r507 1-260-097-11 carbon 680 5% 1/2w r508 1-216-449-11 metal oxide 56 5% 2w f r509 1-216-481-11 metal oxide 1.2k 5% 3w f r510 1-216-449-11 metal oxide 56 5% 2w f r511 1-247-843-11 carbon 3.3k 5% 1/4w r520 1-215-861-00 metal oxide 47 5% 1w f r521 1-249-411-11 carbon 330 5% 1/4w r522 1-249-415-11 carbon 680 5% 1/4w r523 1-216-073-00 res, chip 10k 5% 1/10w r524 1-249-429-11 carbon 10k 5% 1/4w r525 1-249-427-11 carbon 6.8k 5% 1/4w r526 1-216-081-00 res, chip 22k 5% 1/10w r527 1-216-079-00 res, chip 18k 5% 1/10w r528 1-249-421-11 carbon 2.2k 5% 1/4w r529 1-216-101-00 res, chip 150k 5% 1/10w r530 1-216-089-91 res, chip 47k 5% 1/10w r532 1-215-437-00 metal 4.7k 1% 1/4w r533 ! 1-215-461-00 metal 47k 1% 1/4w r534 1-215-451-00 metal 18k 1% 1/4w r535 1-249-441-11 carbon 100k 5% 1/4w r541 1-249-430-11 carbon 12k 5% 1/4w r542 1-249-429-11 carbon 10k 5% 1/4w r543 1-249-429-11 carbon 10k 5% 1/4w r544 1-216-351-00 metal oxide 1.5 5% 1w f r546 1-215-890-11 metal oxide 470 5% 2w f r547 1-249-385-11 carbon 2.2 5% 1/4w f r548 1-249-430-11 carbon 12k 5% 1/4w r549 1-249-429-11 carbon 10k 5% 1/4w a free datasheet http://www.datasheet-pdf.com/
? 54 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c r550 1-249-421-11 carbon 2.2k 5% 1/4w r551 1-249-413-11 carbon 470 5% 1/4w r552 1-247-887-00 carbon 220k 5% 1/4w r553 1-260-312-11 carbon 47 5% 1/2w r554 1-216-101-00 res, chip 150k 5% 1/10w (kv-29al40/kv-29al40c) r555 1-216-093-00 res, chip 68k 5% 1/10w (kv-29al40/kv-29al40c) r556 1-216-081-00 res, chip 22k 5% 1/10w (kv-29al40/kv-29al40c) r557 1-249-431-11 carbon 15k 5% 1/4w (kv-29al40/kv-29al40c) r558 1-216-065-91 res, chip 4.7k 5% 1/10w (kv-29al40/kv-29al40c) r559 1-216-121-91 res, chip 1m 5% 1/10w (kv-29al40/kv-29al40c) r561 ! 1-249-377-11 carbon 0.47 5% 1/4w f r562 ! 1-260-288-11 carbon 0.47 5% 1/2w r571 1-216-365-00 metal oxide 0.47 5% 2w f r572 1-249-429-11 carbon 10k 5% 1/4w r573 1-247-895-91 carbon 470k 5% 1/4w r574 1-249-416-11 carbon 820 5% 1/4w f r575 1-247-895-91 carbon 470k 5% 1/4w r576 1-249-441-11 carbon 100k 5% 1/4w r578 1-215-902-11 metal oxide 47k 5% 1w f r579 1-208-777-11 res, chip 620 0.50% 1/10w r580 1-215-469-00 metal 100k 1% 1/4w r581 1-249-427-11 carbon 6.8k 5% 1/4w r582 1-208-806-11 res, chip 10k 0.50% 1/10w r583 1-208-830-11 res, chip 100k 0.50% 1/10w r584 1-208-822-11 res, chip 47k 0.50% 1/10w r585 1-216-073-00 res, chip 10k 5% 1/10w r586 1-216-073-00 res, chip 10k 5% 1/10w r587 1-216-073-00 res, chip 10k 5% 1/10w r591 1-215-882-00 metal oxide 22 5% 2w f r600 1-247-289-00 carbon 8.2m 5% 1w (kv-29al40a/kv-29al40c) r601 ! 1-219-513-11 carbon 4.7m 5% 1/2w (kv-29al40) r602 ! 1-205-998-11 cemented 1 5% 10w (kv-29al40) r602 ! 1-205-997-11 cemented 2.2 5% 10w (kv-29al40a/kv-29al40c) r603 ! 1-205-998-11 cemented 1 5% 10w (kv-29al40) r603 ! 1-205-997-11 cemented 2.2 5% 10w (kv-29al40a/kv-29al40c) r604 1-260-131-11 carbon 470k 5% 1/2w r605 1-260-131-11 carbon 470k 5% 1/2w r606 1-220-926-11 fusible 0.47 10% 1/2w f r608 1-220-388-21 metal oxide 68k 5% 1w f r609 1-220-388-21 metal oxide 68k 5% 1w f r610 1-220-388-21 metal oxide 68k 5% 1w f r611 1-220-388-21 metal oxide 68k 5% 1w f r612 1-216-349-00 metal oxide 1 5% 1w f r613 1-216-349-00 metal oxide 1 5% 1w f r618 1-212-857-00 fusible 10 5% 1/4w f r622 1-249-393-11 carbon 10 5% 1/4w r623 1-249-441-11 carbon 100k 5% 1/4w r624 1-249-421-11 carbon 2.2k 5% 1/4w r630 1-249-421-11 carbon 2.2k 5% 1/4w r631 1-249-429-11 carbon 10k 5% 1/4w r641 1-216-389-11 metal oxide 1 5% 3w f r642 1-249-437-11 carbon 47k 5% 1/4w r647 1-249-429-11 carbon 10k 5% 1/4w r650 1-249-415-11 carbon 680 5% 1/4w r653 1-216-389-11 metal oxide 1 5% 3w f r670 1-249-421-11 carbon 2.2k 5% 1/4w r671 1-249-417-11 carbon 1k 5% 1/4w r673 1-249-421-11 carbon 2.2k 5% 1/4w r674 1-247-863-91 carbon 22k 5% 1/4w r675 1-215-859-00 metal oxide 22 5% 1w f r690 1-216-355-11 metal oxide 3.3 5% 1w f r691 1-249-395-11 carbon 15 5% 1/4w r692 1-249-395-11 carbon 15 5% 1/4w r699 1-249-413-11 carbon 470 5% 1/4w f relay ry601 ! 1-755-018-11 relay ry602 ! 1-755-266-11 relay, ac power switch sw501 1-572-707-11 switch, lever transformer t501 1-437-210-11 transformer, horizontal drive t502 1-431-731-11 transformer, modulation t504 ! 1-453-268-11 fbt assy, nx-4005//x4j4 t602 ! 1-429-992-11 transformer, converter (prt) t603 ! 1-431-837-11 transformer, converter (pit) thermistor thp601 1-809-539-11 thermistor, positive (kv-29al40) thp601 1-809-827-11 thermistor, positive (kv-29al40a/kv-29al40c) a [ note: the companents identified by [ in this manual have been carefully factory selected for each set in order to satisfy regulations regarding x-ray radiation. should replacement be required, replace only with the value originally used. free datasheet http://www.datasheet-pdf.com/
? 55 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c resistor r1706 1-260-099-11 carbon 1k 5% 1/2w r1707 1-260-099-11 carbon 1k 5% 1/2w r1708 1-260-099-11 carbon 1k 5% 1/2w r1709 1-260-087-11 carbon 100 5% 1/2w r1710 1-260-123-11 carbon 100k 5% 1/2w r1711 1-216-373-11 metal oxide 2.2 5% 2w f r1712 1-216-375-00 metal oxide 3.3 5% 2w f r1713 1-247-807-31 carbon 100 5% 1/4w r1714 1-247-807-31 carbon 100 5% 1/4w r1715 1-247-807-31 carbon 100 5% 1/4w r1720 1-260-132-11 carbon 560k 5% 1/2w * a-1343-525-a e board (var), mounted * a-1343-526-a e board (var), mounted 1-533-223-11 holder, fuse capacitor c5000 1-107-662-11 elect 22mf 20% 250v c5002 1-107-662-11 elect 22mf 20% 250v c5003 1-136-601-11 film 0.01mf 10% 630v c5004 1-130-471-00 mylar 0.001mf 5% 50v c5006 1-130-471-00 mylar 0.001mf 5% 50v c5007 1-130-467-00 mylar 470pf 5% 50v c5008 1-130-471-00 mylar 0.001mf 5% 50v c5009 1-126-965-11 elect 22mf 20% 50v c5010 1-115-804-91 elect 120mf 20% 35v c5020 ! 1-113-941-11 ceramic 0.0047mf 20% 125v c5021 1-113-941-11 ceramic 0.0047mf 20% 125v (kv-29al40/kv-29al40a) c5050 ! 1-136-311-11 film 0.47mf 20% 125v connector cn5000 * 1-580-843-11 pin, connector (power) cn5001 * 1-564-506-11 plug, connector 3p cn5002 * 1-580-843-11 pin, connector (power) cn5003 1-508-786-00 pin, connector (5mm pitch) 2p diode d5001 8-719-911-55 diode u05g d5002 8-719-911-55 diode u05g cv cv e e tuner tu101 ! 8-598-431-00 tuner, fss btf-wa411 varistor vdr602 1-809-267-41 varistor erzv10d471 crystal x300 1-579-972-11 vibrator, crystal (kv-29al40a) x301 1-567-505-11 oscillator, crystal x302 1-579-973-11 vibrator, crystal (kv-29al40a) * a-1331-776-a cv board (com), mounted 4-382-854-11 screw (m3x10), p, sw (+) capacitor c1701 1-107-652-11 elect 10mf 20% 250v c1702 1-162-114-00 ceramic 0.0047mf 2kv c1705 1-107-667-11 elect 2.2mf 20% 160v connector cn1701 * 1-564-509-11 plug, connector 6p cn1702 1-564-511-11 plug, connector 8p cn1703 1-695-915-11 tab (contact) cn1704 1-695-915-11 tab (contact) diode d1704 8-719-901-83 diode 1ss83 d1705 8-719-901-83 diode 1ss83 d1706 8-719-901-83 diode 1ss83 d1708 8-719-302-43 diode el1z ic ic1701 8-759-535-08 ic tda6108q jack j1701 1-251-688-11 socket, crt coil l1701 1-408-613-31 inductor 68uh free datasheet http://www.datasheet-pdf.com/
? 56 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c resistor r2001 1-249-415-11 carbon 680 5% 1/4w r2002 1-249-416-11 carbon 820 5% 1/4w r2003 1-249-421-11 carbon 2.2k 5% 1/4w r2004 1-249-427-11 carbon 6.8k 5% 1/4w r2005 1-249-429-11 carbon 10k 5% 1/4w r2006 1-247-815-91 carbon 220 5% 1/4w switch s2001 1-572-198-11 switch, keyboard s2002 1-572-198-11 switch, keyboard s2003 1-572-198-11 switch, keyboard s2004 1-572-198-11 switch, keyboard s2005 1-572-198-11 switch, keyboard s2006 1-572-198-11 switch, keyboard s2007 1-572-198-11 switch, keyboard * a-1372-483-a hv board (var), mounted capacitor c1407 1-137-194-91 film 0.47mf 5% 50v c1408 1-136-287-11 film 0.0047mf 5% 50v c1409 1-137-194-81 film 0.47mf 5% 50v c1410 1-126-964-11 elect 10mf 20% 50v c1411 1-126-964-11 elect 10mf 20% 50v c1412 1-126-964-11 elect 10mf 20% 50v c1413 1-126-964-11 elect 10mf 20% 50v c1416 1-106-375-12 mylar 0.022mf 99% 200v c1417 1-137-414-11 film 0.0047mf 10% 100v c1418 1-102-114-00 ceramic 470pf 10% 50v c1419 1-130-495-00 film 0.1mf 5% 50v c1420 1-137-371-11 film 0.015mf 5% 50v c1421 1-102-121-00 ceramic 0.0022mf 10% 50v c1422 1-137-414-11 film 0.0047mf 10% 100v c1423 1-137-194-91 film 0.47mf 5% 50v c1424 1-130-495-00 film 0.1mf 5% 50v c1425 1-137-370-11 film 0.01mf 5% 50v c1426 1-130-495-00 film 0.1mf 5% 50v c1427 1-137-370-11 film 0.01mf 5% 50v c1428 1-130-495-00 film 0.1mf 5% 50v c1429 1-137-370-11 film 0.01mf 5% 50v c1430 1-126-964-11 elect 10mf 20% 50v d5003 8-719-948-45 diode era22-08 d5004 8-719-991-33 diode 1ss133t-77 d5005 8-719-991-33 diode 1ss133t-77 d5006 8-719-109-93 diode rd6.2esb2 d5007 8-719-510-48 diode d1n20r d5008 8-719-063-70 diode d1nl20u fuse f5050 ! 1-532-506-51 fuse 6.3a/250v (kv-29al40a/kv-29al40c) f5050 ! 1-576-193-11 fuse 6.3a/125v (kv-29al40) transistor q5001 8-729-044-30 transistor 2sk2845-lb102 q5002 8-729-119-78 transistor 2sc3311a resistor r5001 1-249-389-11 carbon 4.7 5% 1/4w f r5002 1-215-485-00 metal 470k 1% 1/4w r5003 1-240-205-91 carbon 22m 5% 1/2w r5007 1-249-421-11 carbon 2.2k 5% 1/4w r5008 1-249-429-11 carbon 10k 5% 1/4w r5009 1-249-437-11 carbon 47k 5% 1/4w r5010 1-249-415-11 carbon 680 5% 1/4w r5011 1-260-302-51 carbon 6.8 5% 1/2w r5012 1-249-417-11 carbon 1k 5% 1/4w r5013 1-249-415-11 carbon 680 5% 1/4w r5050 1-219-512-11 carbon 2.2m 5% 1/2w transformer t5001 ! 1-431-852-11 transformer, converter (srt) t5050 ! 1-424-220-11 transformer, line filter varistor vdr505 1-801-074-41 varistor erzv10d271 (kv-29al40) vdr505 1-809-267-41 varistor erzv10d471 (kv-29al40a/kv-29al40c) * a-1372-482-a ht board, mounted connector cn2201 * 1-564-518-11 plug, connector 3p hv ht hv ht e free datasheet http://www.datasheet-pdf.com/
? 57 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c k k c1431 1-136-287-11 film 0.0047mf 5% 50v c1432 1-126-964-11 elect 10mf 20% 50v c1437 1-126-964-11 elect 10mf 20% 50v c2068 1-104-665-11 elect 100mf 20% 25v c2234 1-126-960-11 elect 1mf 20% 50v c2235 1-126-960-11 elect 1mf 20% 50v c2236 1-106-343-00 mylar 0.001mf 10% 200v connector cn1405 1-564-510-11 plug, connector 7p cn1406 * 1-564-506-11 plug, connector 3p cn2001 * 1-564-506-11 plug, connector 3p cn2200 * 1-564-514-11 plug, connector 11p diode d2006 1-810-039-11 led unit (kv-29al40a) d2006 1-810-039-21 led unit (kv-29al40/kv-29al40c) ic ic1403 8-759-496-03 ic njm2178l ic2003 8-742-014-11 hyb ic sbx1981-51 jack j2231 1-691-110-11 jack, pin 3p resistor r1403 1-215-437-00 metal 4.7k 1% 1/4w r1404 1-249-419-11 carbon 1.5k 5% 1/4w r1405 1-249-424-11 carbon 3.9k 5% 1/4w r1406 1-249-437-11 carbon 47k 5% 1/4w r1407 1-249-435-11 carbon 33k 5% 1/4w r1408 1-215-469-00 metal 100k 1% 1/4w r1409 1-249-417-11 carbon 1k 5% 1/4w r1410 1-215-461-00 metal 47k 1% 1/4w r1411 1-249-429-11 carbon 10k 5% 1/4w r1412 1-249-429-11 carbon 10k 5% 1/4w r1413 1-249-429-11 carbon 10k 5% 1/4w r1414 1-249-429-11 carbon 10k 5% 1/4w r1415 1-249-429-11 carbon 10k 5% 1/4w r1416 1-249-429-11 carbon 10k 5% 1/4w r1417 1-249-429-11 carbon 10k 5% 1/4w r1419 1-249-441-11 carbon 100k 5% 1/4w r1420 1-249-429-11 carbon 10k 5% 1/4w r1421 1-249-441-11 carbon 100k 5% 1/4w r1422 1-249-429-11 carbon 10k 5% 1/4w r1423 1-249-441-11 carbon 100k 5% 1/4w r1430 1-215-461-00 metal 47k 1% 1/4w r1431 1-249-429-11 carbon 10k 5% 1/4w r1433 1-249-429-11 carbon 10k 5% 1/4w r1434 1-215-445-00 metal 10k 1% 1/4w r1435 1-249-431-11 carbon 15k 5% 1/4w r2236 1-247-895-91 carbon 470k 5% 1/4w r2237 1-249-425-11 carbon 4.7k 5% 1/4w r2238 1-247-895-91 carbon 470k 5% 1/4w r2239 1-249-425-11 carbon 4.7k 5% 1/4w * a-1372-117-a hz board, mounted (kv-29al40a only) connector cn901 * 1-580-843-11 pin, connector (power) cn902 * 1-580-843-11 pin, connector (power) switch s901 ! 1-571-433-21 switch, push (ac power) * a-1380-582-a k board (var), mounted 4-382-854-11 screw (m3x10), p, sw (+) capacitor c1401 1-126-957-11 elect 0.22mf 20% 50v c1402 1-126-957-11 elect 0.22mf 20% 50v c1403 1-126-943-11 elect 2200mf 20% 25v c1404 1-126-943-11 elect 2200mf 20% 25v c1405 1-126-382-11 elect 100mf 20% 16v c1406 1-126-382-11 elect 100mf 20% 16v c1450 1-136-171-00 film 0.33mf 5% 50v c1451 1-136-171-00 film 0.33mf 5% 50v c1452 1-137-366-11 film 0.0022mf 5% 50v c1453 1-137-366-11 film 0.0022mf 5% 50v connector cn1400 * 1-564-507-11 plug, connector 4p cn1401 * 1-564-506-11 plug, connector 3p cn1402 1-564-510-11 plug, connector 7p hz hv hz free datasheet http://www.datasheet-pdf.com/
? 58 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c ic ic1400 8-759-498-09 ic tda1519aqu ic1401 8-759-498-09 ic tda1519aqu coil l1001 1-408-421-00 inductor 100mh l1002 1-410-470-11 inductor 10uh ic link ps1400 1-532-984-11 link, ic 2a/90v ps1401 1-532-984-11 link, ic 2a/90v transistor q1400 transistor 2sc3311a resistor r1401 1-249-429-11 carbon 10k 5% 1/4w r1402 1-249-437-11 carbon 47k 5% 1/4w r1433 1-249-421-11 carbon 2.2k 5% 1/4w r1434 1-249-429-11 carbon 10k 5% 1/4w r1435 1-249-429-11 carbon 10k 5% 1/4w r1436 1-249-421-11 carbon 2.2k 5% 1/4w r1437 1-247-863-91 carbon 22k 5% 1/4w r1450 1-249-422-11 carbon 2.7k 5% 1/4w r1451 1-249-422-11 carbon 2.7k 5% 1/4w r1452 1-249-429-11 carbon 10k 5% 1/4w r1453 1-249-429-11 carbon 10k 5% 1/4w accessory and packing materials 3-861-918-41 manual, instruction * 4-041-255-01 bag, protection * 4-064-029-01 cushion assy, upper * 4-064-032-01 cushion assy,lower * 4-064-241-01 carton, individual remote commander 1-475-801-11 remote commander (rm-y165) 4-978-977-01 battery cover (for remote) k free datasheet http://www.datasheet-pdf.com/
? 59 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c notes: free datasheet http://www.datasheet-pdf.com/
? 60 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c notes: free datasheet http://www.datasheet-pdf.com/
? 61 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c free datasheet http://www.datasheet-pdf.com/
? 62 ? ref.no. part no. description remark ref.no. part no. description remark note: the components identified with shading and a critical symbol are critical for safety. replace only with part number specified. note: les composants identifies per un trame et une marque sont critiques pout la securite. ne les remplacer que par une piece portant le numero specifie. ! ! kv-29al40/kv-29al40a/kv-29al40c english 98ij74117-1 printed in u.s.a. ?1998.9 9-965-860-01 sony corporation sony technology center product quality division service promotion department free datasheet http://www.datasheet-pdf.com/

▲Up To Search▲

Price & Availability of KV29AL40C

	To Download KV29AL40C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .