technical data sheet 1 / 4 universal screw jack receptacle r125.556.001 for 0.3 mm axe series : sma issue : 0905 b in the effort to improve our products, we reserve t he right to make changes judged to be necessary. all dimensions are in mm. . . pn ao components body center contact outer contact insulator gasket others parts - - materials stainless steel beryllium copper - ptfe - - - - platings ( m m ) passivated gold 1.3 over nickel2 - - - -
technical data sheet 2 / 4 universal screw jack receptacle r125.556.001 for 0.3 mm axe series : sma issue : 0905 b in the effort to improve our products, we reserve t he right to make changes judged to be necessary. packaging specification standard unit other 1 - contact us electrical characteristics environmental impedance 50 w operating temperature - 65/+125 c frequency 0 - 18 ghz hermetic seal na atm.cm3/s vswr 1.06 + 0,0100 x f(ghz) maxi panel leakage na insertion loss 0.03 ? f(ghz) db maxi rf leakage - ( na - f(ghz)) db maxi voltage rating 335 veff maxi dielectric withstanding voltage 1000 veff mini insulation resistance 5000 m w mini others characteristics assembly instruction na others : mechanical characteristics center contact retenti on axial force C mating end 27 n mini axial force C opposite end 27 n mini torque na n.cm mini recommended torque mating na n.cm panel nut 190 n.cm mating life 500 cycles mi ni weight 0,3380 g
technical data sheet 3 / 4 universal screw jack receptacle r125.556.001 for 0.3 mm axe series : sma issue : 0905 b in the effort to improve our products, we reserve t he right to make changes judged to be necessary. percage panneau (mounting hole) : the d1 and l1 dimensions have to be determined acco rding to each using situation we advise in the two following situations : (see pa ge 4/4) - using of the r280.469.000 :removable socket : d1 = 2 + or C0.02 l1 = 2. 5 + or C0.1 - the bead pin is directly welded on the track d1 = 0.70 + or C0.02 l1 = from 1 to 4 according to the custom er s design criteria
technical data sheet 4 / 4 universal screw jack receptacle r125.556.001 for 0.3 mm axe series : sma issue : 0905 b in the effort to improve our products, we reserve t he right to make changes judged to be necessary. montage (mounting) : x = 2 +/-0.5 (0.08 +/- 0.02) x = l1 + a glass bead : 1 C adjust x by cutting the pin if necessary . 2 C introduce the glass bead into its housing as here above (with the mounted 3 C weld the ring by putting a welding wire in th e groove soc ket) 4 C weld the pin (or socket) on the track - beware there is not too much welding . - important : for maximum rf charactiristics the link track / pin must be as thin as possible . we advise therefore to follow th e a dimension rigourousely , by welding accuratly the bead pin directely on the track (right drawing) - connector : - screw the connector into the housing . thigten up t o 17 inch-pound torque - (use special tooling set radiall r282.341.010)
|
