 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 1 functional block diagram tx in gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd v cc v en v mode2 v mode1 rx cpl out cpl in ant product description the tqm613029 is a fully matched cdma cellular band pa-duplexer module for use in mobile phones as part of triquint ?s tritium ii product family. the module is designed with a focus on size, current consumption and phone layout simplicity. within a compact area of only 28mm 2 , the module integrates a single-ended transmit filter, duplexer, high efficiency pa die, rf power coupler, matching and built in voltage regulator functionality eliminating the need for external switch circuitry. with an rf power output up to 25dbm the tqm613029 meets the strict acpr/altr requirements of multi-band, feature-rich cdma2000 handset designs. the module will provide the lowest overa ll current consumption available in the market based on the current sub-urban cdg (cdma development group) curve by providing a 3 gain state amplifier. in low-power mode operation a quiescent current of only 5ma will allow the module to achieve an overall average current of less than 50ma. the pin layout is optimized for use with new cdma discrete and packaged transceiver solutions although its operation is backwards compatible with existing chipsets. electrical specifications test conditions v cc =3.4v, v en =high, t=25oc parameter typ units frequency 824 - 848 mhz max p out 26 dbm acpr (885khz offset) at max p out -50 dbc altr (1.98mhz offset) at max p out -60 dbc current consumption (at +25dbm pout) 380 ma quiescent current in lpm 5 ma leakage at rx port -30 dbm rx noise -183 dbm/hz features ? compact 7.0x4.0x1.1mm module replacing more than 12 discrete components ? integrated duplexer, single-ended tx filter, pa die, rf power coupler and matching ? built-in voltage regulator functionality eliminating any external switch circuitry ? high efficiency three gain state pa for lowest overall current consumption ? typical quiescent current values: low power mode (lpm) = 5ma medium power mode (mpm) = 20ma high power mode (hpm) = 80ma ? low current consumption typical: 380 ma @ +25dbm typical: 23 ma @ +8dbm ? excellent acpr typical: -50 dbc @ +/- 885khz offset ? excellent altr typical: -60 dbc @ +/- 1.98 mhz offset ? lead-free 260c rohs compliant ? halogen free (hf) applications ? is-95/98/cdma2000 ? evdo rev a compliant package style tx in gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd v cc v en v mode2 v mode1 rx cpl out cpl in ant 20 1 top view (through package) absolute maximum ratings
tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 2 symbol parameter absolute maximum value units v cc supply voltage with no rf applied supply voltage with rf applied +6.0 +4.7 v v v mode1 , v mode2 mode control voltages +2.7 v p in input rf power at tx port input rf power at antenna port input rf power at rx port +10 +30 +10 dbm dbm dbm t c case temperature, survival -35 to +85 c t stg storage temperature -55 to +125 c esd human body model (jesd22-a114) at ant, tx in , and rx human body model (jesd22-a114) at all other ports machine model (jesd22-a115) at ant, tx in , and rx machine model (jesd22-a115) at all other ports 300 >2000 110 170 v v v v note : stresses above those listed under absolute maximum ratings ma y cause permanent and functional damage to the device. exposure exceeding absolute maximum rating conditions for extended periods may affect device reliabi lity. the part may not survive all maximums applied simultaneou sly. dc electrical characteristics parameter conditions min. typ/nom max. units supply voltage (v cc ) no rf hpm, mpm, lpm with rf ruggedness testing 3.2 3.2 3.8 3.8 6.0 4.2 4.7 v v v pa enable digital control voltage (v en ) low ? pa off high ? pa enabled 0.0 1.8 0.5 2.7 v v pa bias mode control voltages (v mode1 , v mode2 ) v mode1 / v mode2 = low v mode1 / v mode2 = high 0.0 1.8 0.5 2.7 v v control line current (i control ) all control lines (source or sink current) 1 ma leakage current (i leak ) total current on all pins; t=-20to+85c, v cc =4.7v, v en =0v 5 15 a turn on/off time 1 (t on-dc , t off-dc ) 20 s gain switching time (t mode ) high-mid-low 6 s ambient operating temperature -30 +85 c case temperature (temp case ) -35 +95 c note 1 : definition of switching time: t on-dc = the time required to obtain the id le bias condition 10% from a zero bias condition with rf signal applied t off-dc = the time required for the bias curr ent (idle current) to decrease to < 100 a tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 3 power range truth table mode of operation v en v mode1 v mode2 v cc power down / pa off low x x on stand-by mode n/a n/a n/a n/a n/a high power mode ? hpm (-50 dbm < p out +26 dbm) high low high on medium power mode ? mpm (-50 dbm < p out < +14 dbm) high high high on low power mode ? lpm (-50 dbm < p out < +8 dbm) high x low on tx to antenna port rf electrical characteristics 1 parameter conditions min. typ/nom max. units rf frequency 824.70 - 848.31 mhz maximum output power hpm, v cc =3.4 ? 4.2v, 25oc tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 5 rx to antenna port rf electrical characteristics parameter conditions min. typ/nom max. units frequency 869 - 894 mhz insertion loss 869 ? 894 mhz, -30oc < t < 85oc - 2.6 3.5 db rx vswr ant and rx ports - - 2.5:1 attenuation bco tx 824-849 mhz bc1 tx 1850-1910 mhz ism tx 2400-2484 mhz rx 2 nd harmonic 1738-1788mhz rx 3 rd harmonic 2607-2682 mhz rx 4 th harmonic 3476-3576 mhz 45 35 35 30 30 20 - - - - - - - - - - - - db db db db db tx to rx port rf electrical characteristics parameter conditions min. typ/nom max. units tx leakage 25.5 dbm, 3.8v, 25oc < t < 60oc - -32 -27 dbm coupled port rf electrical characteristics parameter conditions min. typ/nom max. units tx power at coupled port over freq relative to p out , 16dbm < p out < 26dbm, cpl_in = 50? , 25oc< <55oc -24 -21 -19 dbc coupler loss cplin to cplout - - 2.0 dbm output impedance - 50 - ? vswr hpm, coupled port - - 2.0:1 variation in delivered power 1 hpm, 3.5:1 @ all angles, 22dbm < p out < 26dbm -4.0 - 0.5 db temp variation hpm, 25dbm, 50 ? load at ant, 3.8v, -30oc < t < 85oc -0.5 - 0.5 db note 1: set the input power using a 50 ohm load, then measure variati on in output power for the same coupled power. the coupled power should be adjusted to remain constant. tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 6 pin out and assignments tx in gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd v cc v en v mode2 v mode1 rx cpl out cpl in ant 20 1 top view (through package) pin symbol description 1 gnd ground 2 gnd ground 3 v cc supply voltage 4 cplout directional coupler out 5 cplin directional coupler in (coupler termination port) 6 gnd ground 7 gnd ground 8 gnd ground 9 ant duplexer ant port 10 gnd ground 11 gnd ground 12 rx duplexer rx output port 13 gnd ground 14 v mode1 control for high and medium power modes 15 v mode2 control for low power mode 16 v en enable control 17 gnd ground 18 tx_in tx input 19 gnd ground 20 gnd ground tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 7 applications information; tuning pr ocedures; board layout precautions triquint offers our customers the below evaluation boar d as a means for testing and analysis of the tqm613029. the evaluation board schematic and pi cture are provided for preliminary analysis and design. the following figures show the triquint application board and the schem atic of the board followed by the power-up/power-down sequence instructions tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 8 v mode2 vmode1 applications information: power up/down sequences power-up sequence power-down sequence sequence pin description sequence pin description 1 v cc apply battery voltage 1 rf remove rf 2 v mode1 set pa mode 1 bit 2 v en disable pa 3 v mode2 set pa mode 2 bit 3 v mode1 set v mode1 = 0v 4 v en enable pa 4 v mode2 set v mode1 = 0v 5 rf apply rf 5 v cc remove battery voltage tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 9 pc board layout recommendations tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 10 recommended reflow profile the tqm613029 is rated for 260oc reflow profile. below is a gener al recommendation for 260oc reflow. the specific profile used will need to take into account the requirements of the board, other com ponents, and the layout. the following recommendation should only be used as a guideline. tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 11 package dimensions bottom view package drawing tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 12 package marking pin 1 tqm613017 cccc aaxxxx-z yyww top mark pin 1 tqm613017 cccc aaxxxx-z yyww top mark tqm613029 1) line 1 : product code = tqm613029 2) line 2: country code = cccc (usa = united states, phil = philippines) 3) line 3: aaxxxx-z = aa = vendor code + xxxx = triq uint lot number + z = sub lot # (1, 2, 3, ?) 4) line 4: yyww = year and work week tape and reel specification: 613017 carrier tape - 3m part # 3m053091, ao = 4.55mm, bo = 7.60mm, ko = 1.73mm, width = 16mm, pitch = 8mm cover tape - 3m part # 2678 13.3mm wide note: packaged quantity is 2,500 per reel tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data sheet for additional information and latest specifications, see our website: www.triquint.com revision h, august 5, 2009 13 shipment box & label description: tape & reels will be packaged in a dry-pack bag and then in a ship ment box. the box dimensions will depend on the number of ree ls shipped in each box and are noted in the table below. the box label and a description of each item on the label are also shown below. 13 inch x16mm--drypack box size reel qty/box empty box wt w/ packing 15x15x7 3 2 18x15x11 5 2.36 17x16x17 9 2.76 ship from: triquint semiconductor, inc 2300 ne brookwood parkway hillsboro, or 97124 ship to: recipient address information here (3s) pkg id: 581+23047123 (k) trans id: 812934657 (p) cpn: 5871-2489 (q) qty: 20000 (1p) spn: tqd777001 (13q) pkg count: 1/1 package weight 3.0 lb / 1.36 kg mpn: 1005859 supplier code: 10 character max. + tqs shipper number. (pkg. id/serial number) customer purchase order. 20 character max. customer part number. 22 character max. supplier product number. 21 character max. quantity. box count (1/3, 2/3, etc.) manufacturer's part number format: 4 * 6.5 in 102 * 166 mm code 39 1:2 all barcodes contain data identifier followed by data, e.g. k812934657 tqm613029 data sheet tritium ii pa-duplexer module ? cdma cellular band data shee for additional information and latest specifications, see our website: www.triquint.com t revision h, august 5, 2009 14 additional information 1 this part is compliant with rohs directive (restrictions on the use of certain hazardous substances in electrical and electronic equipment). the part is rated moisture sensitivity level 3 at 260 c per jedec standard ipc/jedec j-std-020. 1 for latest specifications, additional product information, worldwide sales and distribution locations, and information about triquint: web: www.triquint.com tel: (503) 615-9000 email: info_wireless@tqs.com fax: (503) 615-8902 for technical questions and additional information on specific applications: email: info_wireless@tqs.com the information provided herein is believed to be reliable; triquint assumes no liability for inaccuracies or omissions. triqui nt assumes no responsibility for the use of this information, and all such information shall be entirely at the us er's own risk. prices and specifications are subject to change without notice. no patent rights or licenses to any of the circuits described herein are implied or granted to any third party. triquint does not authorize or warrant any triquint product for use in life-support devices and/or systems. copyright ? 2004 triquint semiconducto r, inc. all rights reserved 2008. |
Price & Availability of TQM613029-15
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |