View PAM8902HZER_8234554.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

pam8902h document number: dsxxxxx rev. 1 - 0 1 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated 30 v pp mono class-d audio amplifie r for piezo/ceramic speakers description the pam8902h is a mono, class-d audio amplifier with integrated boost convertor designed for pi ezo and ceramic speakers.the pam8902h is capable of driving a ceramic/ piezo speaker with 30vpp(10.6vrms) from a 3.6v power supply.the pam8902h's boost converter operates at a fixed frequency of 1.5mhz , and provides a 17.5v supply with a minimum number of external components. pam8902h features an integrated audio low pass filter that rejects high frequency noise thus improving audio fidelity. and three gain modes of 21db, 26db and 32.5db easy for using.pam8902h also provides thermal ,short, under and over voltage protection. the pam8902h is available in a 16-ball 1.95mm x 1.95mm csp package and 16-pin qfn4x4 package. features ? supply voltage range from 2.5v to 5.5v ? 30 v pp output load voltage from a 2.5v supply ? integrated boost converter generates 17.5v supply ? programmable soft-start ? small boost converter inductor ? selectable gain of 21db, 26db, and 32.5db ? selectable boost output voltage of 8v, 12v, and 17.5v ? low shutdown current: <1a ? build in thermal , ocp ,ovp,short protection ? available in space saving packages: ? 16-ball 1.95mmx1.95mm csp package ? 16-pin qfn4x4 package applications ? wireless or cellular handsets ? portable dvd player ? personal digital assistants (pdas ) ? electronic dictionaries ? digital still cameras pin assignments
pam8902h document number: dsxxxxx rev. 1 - 0 2 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated typical applications circuit pin descriptions pin name bump (csp) pin number (qfn) function pvcc a1 16 audio amplifier power supply vout a2 1 boost convertor output sw a3 2 boost convertor switching node pgnd1 a4 4 boost convertor power ground out+ b1 15 positive differential audio output vset b2 3 boost convertor output voltage setting (8v,12v,17.5v) comp b3 5 boost convertor compensation avdd b4 6 power supply out- c1 14 negative differential audio output gset c2 11 amplifier gain setting ( 21db , 26db , 32.5db) vcm c3 7 common mode bypass cap agnd c4 8 analog ground pgnd2 d1 13 class d power ground ena d2 12 whole chip enable inn d3 10 negative differential audio input inp d4 9 positive differential audio input
pam8902h document number: dsxxxxx rev. 1 - 0 3 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated functional block diagram absolute maximum ratings (@t a = +25c, unless otherwise specified.) these are stress ratings only and functional operation is not im plied. exposure to absolute maximum ratings for prolonged time periods may affect device reliability. all voltages are with respect to ground. parameter rating unit supply voltage 6.0 v input voltage -0.3 to v dd +0.3 storage temperature -65 to 150 c maximum junction temperature 150 soldering temperature 250, 10sec recommended operating conditions (@t a = +25c, unless otherwise specified.) parameter rating unit supply voltage range 2.5 to 5.5 v ambiient temperature range -40 to +85 c junction temperature range -40 to +125
pam8902h document number: dsxxxxx rev. 1 - 0 4 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated thermal information parameter symbol package maximum unit thermal resistance (junction to ambient) ja csp 90 c/w qfn4x4-16 52 thermal resistance (junction to case) jc csp 72 c/w qfn4x4-16 30 electrical characteristics (@t a = +25c, v dd = 3.6v, c l = 1f, v set float, unless otherwise specified.) symbol parameter conditions min typ max unit v dd input voltage 2.5 5.5 v i q quiescent current en > 1.2v, vset = high 30 48 ma en > 1.2v, vset = floating 10 18 en > 1.2v, vset = gnd 5 12 i sd shutdown current en = 0v 0.1 1.0 a t wu wake-up time en from low to high 40 ms v eh chip enable 1.2 v v el chip disable 0.4 v h gset/vset high v dd -0.5 v dd v v f gset/vset floating 1 v dd -1 v l gset/vset low 0 0.5 uvlo under voltage lockout threshold v dd from high to low 2.2 v uvlo h under voltage lockout hysteresis v dd from low to high 0.2 otp thermal shutdown threshold 150 c otp h thermal shutdown lockout hysteresis 30 c boost converter v o 1 output voltage vset = gnd, no load 7.2 8.0 8.8 v v o 2 vset = nc, no load 10.8 12.0 13.2 v v o 3 vset = avdd, no load 16 17.5 19 v c l current limit average input current 1.0 a r ls low side mosfet r ds(on) i o = 50ma 0.5 ? f oscb boost switching frequency 1.1 1.5 1.9 mhz class-d f oscd class-d amplifier switching frequency input ac-gnd 225 375 475 khz cmrr common mode reject ratio v in = 100mv, v dd = 3.6v 60 db v os output offset voltage output offset voltage 5 50 mv r p r ds(on) high side 1.5 ? low side 0.6 ? a v 1 closed-loop voltage gain g set = avdd, v o = 1v rms 32.5 db a v 2 g set = avdd, v o = 1v rms 26 a v 3 g set = avdd, v o = 1v rms 21 psrr power supply reject ratio 200m v pp supply ripple @ 217hz 70 db thd+n total harmonice distortion plus noise v o = 5v rms 0.3 % snr signal to noise ratio input ac ground, a-weighting 90 db
pam8902h document number: dsxxxxx rev. 1 - 0 5 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated typical operating characteristics (@t a = +25c, v dd = 4.2v, gain = 26db, c in = 1f, c load = 1f, unless otherwise specified.)
pam8902h document number: dsxxxxx rev. 1 - 0 6 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated typical operating characteristics (cont.) (@t a = +25c, v dd = 5v, gain = 18db, unless otherwise specified.)
pam8902h document number: dsxxxxx rev. 1 - 0 7 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated application information select boost convertor output voltage customer can use v set pin to set boost converor output voltage between 8v, 12v and 17.5v. v set pin configuration table as below: v set pin configuration min max pvcc voltage audio amplifier maximum output voltage connect to avdd avdd ? 0.5v avdd 17.5v 11v rms (v pp = 31.1v) floating 1v avdd ? 1v 12v 5v rms (v pp = 22.6v) connect to gnd gnd 0.5v 8v 5v rms (v pp = 14.1v) input resistance (r i ) the input resistors (r i = r in + r ex ) set the gain of the amplifier according to equation 1 when anti-sat uration is inactive. g = 20 log [12.8*r f /(r in + rex )] (db) g set r in r f g set = v dd 36.5k ? 122.6k ? g set = floating 59k ? 100k ? g set = gnd 82k ? 77.4k ? where r in is a 77.4k ? internal resistor, r ex is the external input resistor, r f is a 122.6k ? internal resistor. resistor matching is very important in fully differential amplifiers. the balance of the output on the reference voltage depends on matched ratios of the resistors . cmrr, psrr, and cancellation of the second harmonic distortion diminish if resistor mismatch occurs. t herefore, it is recommended to use 1% tolerance resistors or better to keep the performance optimized. ma tching is more important than overall tole rance. resistor arrays with 1% matchin g can be used with a tolerance greater than 1%. place the input resistors very close to the pam8902h to lim it noise injection on the high-impedance nodes. for optimal performa nce the gain should be set to lower. lower gain allows the pam8902h to operat e at its best, and keeps a high voltage at the input making the inputs less susceptible to noise. in addition to these features, higher value of r i minimizes pop noise. input capacitors (c i ) in the typical application, an input capacitor, c i , is required to allow the amplifier to bias t he input signal to the proper dc level for optimum operation. in this case, c i and the minimum input impedance r i form is a high-pass filter with the corner frequency determined in the follow equation: c r2 1 f i i c = it is important to consider the value of c i as it directl y affects the low frequency performance of the circuit. for example, when r i is 150k ? and the specification calls for a flat bass response are down to 150hz. equat ion is reconfigured as followed: ifc i r2 1 c = when input resistance variat ion is considered, the c i is 7nf, so one would likely choose a value of 10nf. a further consideration for this capacitor is the leakage path from the i nput source through the input network (c i , r i + r f ) to the load. this leakage current creates a dc offset voltage at the input to the amplifier that reduces useful headr oom, especially in high gain applications. for this reason, a lo w-leakage tantalum or ceramic capacitor is the best choice. when polarized capacitors are used, the positive side of the capacitor should face the am plifier input in most applications as the dc level is held at v dd /2, which is likely higher than the source dc level. please note that it is important to confirm the capacitor polarity in the application.
pam8902h document number: dsxxxxx rev. 1 - 0 8 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated application information (cont.) decoupling capacitor the pam8902h is a high-performance cmos audio amplifier that requires adequate power supply decoupling to ensure the output tot al harmonic distortion (thd) as low as possible. the optimum decoupling is achieved by using two different types of capacitors that ta rget on different types of noise on the po wer supply leads. for higher frequency transients, spikes or digital hash on the line, a good low equiva lent series-resistance (esr) ceramic capa citor, typically 1f, is placed as close as possible to the device avdd pin for the best operation. for filtering lower frequency noise signals, a large ceramic capacitor of 10f or greater placed near the avdd supply trace is recommended. external schottky diode use external schottky diode can get the bes t driving capability and efficiency. since internal power diode has limited driving capability, only in following conditions customer can remove the external schottky diode to reduce the cost. 1. v set = gnd or floating and c l less than 1f. 2. the signal frequency less than 4khz. 3. haptic application (50-500hz) shutdown operation in order to reduce power consumption while not in use, the pam89 02h contains shutdown circuitry amplifier off when a logic low is placed on the ena pin. by switching the ena pin connected to gnd, the pam 8902h supply current draw will be minimized in idle mode. under voltage lock-out (uvlo) the pam8902h incorporates circuitry designed to detect supply voltage. when the supply voltage drops to 2.2v or below, the pam8 902h goes into a state of shutdown, and the device comes out of its shutdown state and restore to normal function only when reset the pow er supply or ena pin. short circuit protection (scp) the pam8902h has short circuit protection circuitry on the outputs to prevent the device from damage when output-to-output shor ted or output- to-gnd shorted occurs. when a shor t circuit occurs, the dev ice goes into a latc h state and must be reset by cycling the voltag e on the ena pin to a logic low and then back to the logic high state for normal operation. this will clear the short-circuit flag and allow for normal operation if the short was removed. if the short was not remov ed, the protection circui try will again activate. over temperature protection (otp) thermal protection on the pam8902h prevents the device from damage when the internal die temperature exceeds +150c. there is a 15c tolerance on this trip point from device to device. once the die temperature exce eds the set point, the device will enter the s hutdown state and the outputs are disabled, in this condition both out+ and out- will become high impedance. this is not a latched fault. the the rmal fault is cleared once the temperature of the die dec reased by 30c. this large hysteresis will prevent motor boating sound well and the device begins normal operation at this point with no external system interaction.
pam8902h document number: dsxxxxx rev. 1 - 0 9 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated ordering information part number part marking package type standard package PAM8902HZER bt yw csp-16l 3000 units/tape&reel pam8902hker p8902h xxxyw qfn4x4-16l 3000 units/tape&reel marking information
pam8902h document number: dsxxxxx rev. 1 - 0 10 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated package outline dimensions (all dimensions in mm.) csp-16
pam8902h document number: dsxxxxx rev. 1 - 0 11 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated package outline dimensions (all dimensions in mm.) qfn4x4-16
pam8902h document number: dsxxxxx rev. 1 - 0 12 of 12 www.diodes.com december 2012 ? diodes incorporated pam8902h a product line o f diodes incorporated important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2012, diodes incorporated www.diodes.com

▲Up To Search▲

Price & Availability of PAM8902HZER

	To Download PAM8902HZER Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .