View A050VW01-V1_7868244.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

version: 0.0 page: 0/21 customer approval sheet company name model a050vw01 v1 customer approved title : name : approval for specifications only (spec. ver. ) approval for specifications and es sample (spec. ver. ) approval for specifications and cs sample (spec. ver. ) customer remark : auo pm : p/n : 97.05a07.100 comment : auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. doc. version : 0.0 total pages : 21 date : 2008/10/07 product specification 5.0" color tft-lcd module model name: a050vw01 v1 < >preliminary specification < >final specification note: the content of this specification is subject to change. ? 2008 au optronics all rights reserved, do not copy. auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 1/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. record of revision version revise date page content 0.0 2008/10/07 first draft. auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 2/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. contents a. general information ..................................... ................................................... .............................................3 b. outline dimension ...................................... ................................................... ..............................................4 1. tft-lcd module C front view.............................. ................................................... ...................................4 2. tft-lcd module C rear view .............................. ................................................... ...................................5 c. electrical specifications................................ ................................................... ...........................................6 1. tft lcd panel pin assignment.............................. ................................................... .................................6 2. absolute maximum ratings.................................. ................................................... ....................................8 3. electrical dc characteristics......................... ................................................... ...........................................8 4. electrical ac characteristics ........................ ................................................... ..........................................10 5. power on/off characteristics........................... ................................................... ......................................12 d. optical specification................................... ................................................... ............................................13 e. reliability test items................................... ................................................... ............................................16 f. packing and marking ...................................... ................................................... ........................................19 1. packing form .......................................... ................................................... ...............................................19 2. module/panel label information............................... ................................................... ..............................20 3. carton label information .................................. ................................................... ......................................20 g. precautions.......................................... ................................................... ................................................... .21 auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 3/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. a. general information this product is for pnd and mid applications. no. item unit specification remark 1 screen size inch 5.0(diagonal) 2 display resolution dot 800rgb(h)480(v) 3 overall dimension mm 119.6(h) 76.5(v) 2.84(t) note 1 4 active area mm 108.0(h)64.8(v) 5 pixel pitch mm 0.045(h)0.135(v) 6 color configuration -- r. g. b. stripe note 2 7 color depth -- 16.7m colors note 3 8 ntsc ratio % 50 9 display mode -- normally white 10 panel surface treatment -- anti-glare, 3h 11 weight g 57.8 12 panel power consumption w 1.2 note 4 13 backlight power consumption mw 896 14 viewing direction 6 oclock (gray inversion) note 1: not include fpcs. refer next page to get fur ther information. note 2: below figure shows dot stripe arrangement. note 3: the full color display depends on 24-bit da ta signal (pin 5~28). note 4: please refer to electrical characteristics chapter. . . ( 1 2 3 .2398 2399 2400) (1 ..480) auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 4/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. b. outline dimension 1. tft-lcd module C front view auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 5/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. 2. tft-lcd module C rear view auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 6/21 c. electrical specifications 1. tft lcd panel pin assignment recommended connector : fh12-50s-0.5sh pin no. symbol type description remark 1 gnd p ground for digital circuit 2 gnd p ground for digital circuit 3 vdd p dc-dc circuit supply voltage 4 vdd p dc-dc circuit supply voltage 5 dr0 i red data input; lsb 6 dr1 i red data input 7 dr2 i red data input 8 dr3 i red data input 9 dr4 i red data input 10 dr5 i red data input 11 dr6 i red data input 12 dr7 i red data input; msb 13 dg0 i green data input; lsb 14 dg1 i green data input 15 dg2 i green data input 16 dg3 i green data input 17 dg4 i green data input 18 dg5 i green data input 19 dg6 i green data input 20 dg7 i green data input; msb 21 db0 i blue data input; lsb 22 db1 i blue data input 23 db2 i blue data input 24 db3 i blue data input 25 db4 i blue data input 26 db5 i blue data input 27 db6 i blue data input 28 db7 i blue data input; msb auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 7/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 29 gnd p ground for digital circuit 30 dclk i data clock input 31 disp i standby mode control pin. normally pull high. disp = 1, normal operation. disp = 0, standby mode. 32 nc - not connected. please leave it open. 33 nc - not connected. please leave it open. 34 de i data enable input. active level is high. 35 u/d i u/d = 1, down scan. u/d = 0, up scan. 36 nc - no connection. please leave it open 37 gnd p ground for digital circuit 38 gnd p ground for digital circuit 39 nc - not connected. please leave it open. 40 nc - not connected. please leave it open. 41 nc - not connected. please leave it open. 42 nc - not connected. please leave it open. 43 nc - no connection. please leave it open 44 nc - no connection. please leave it open 45 nc - no connection. please leave it open 46 vled- p backlight led cathode 47 vled+ p backlight led anode 48 gnd p ground for digital circuit 49 gnd p ground for digital circuit 50 gnd p ground for digital circuit note 1: i: input; o: output; p: power. note 2: for correct power on sequence please refer to section 5 power on/ off sequence auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 8/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. absolute maximum ratings item symbol condition min. max. unit remark power voltage vdd gnd=0 -0.3 4.5 v note 1 input signal voltage data gnd=0 -0.3 vdd+0.3 v digital signal note 1: functional operation should be restricted u nder ambient temperature (25 ). note 2: maximum ratings are those values beyond which damages to the device may occur. functional operation should be restricted to the limits in the electrical characteristics chapter. 3. electrical dc characteristics a. typical operation condition (agnd =gnd = 0v) item symbol min. typ. max. unit remark power supply vdd 3.1 3.3 3.5 v input high voltage vih 0.7*vdd - vdd v input low voltage vil 0 - 0.3*vdd b. current consumption (agnd=gnd=0v) parameter symbol condition min. typ. max. unit remark i vdd vdd=3.3v - 90 110 m a note 1, 2 input current for vdd i vdd (standby) vdd=3.3v - 10 50 ua note 3 note 1: test condition is under typical electrical d c and ac characteristics. note 2: test pattern is the following picture (color bar). note 3: in standby mode, all digital signals are st opped. ex. dclk, de ...etc. c. backlight driving conditions the backlight (led module, note 1) is suggested to drive by constant curr ent with typical value. parameter symbol min. typ. max. unit remark led current i l -- 20 22 ma note 1 power p l -- 896 1108 mw led life time l l 10,000 -- -- hr note 2, 3 note 1: led backlight is two parallel strings and on e led for each string is as below figure. suggest drive by 20ma for each led string. auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 9/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 22.4 v i l i l note 2: define led lifetime: brightness is decreased to 50% of the initial value. led lifetime is restricted under normal condition, ambient temperature = 25 and led lightbar current = 20 ma. note 3: if it uses larger led lightbar voltage/ curr ent more than 20ma, it maybe decreases the led lifetime. auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 10/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 4. electrical ac characteristics a. signal ac characteristics parameter symbol min. typ. max. unit remark dclk duty cycle -- 40 50 60 % t cw / t dclk x100% de setup time t est 8 -- -- ns de hold time t ehd 8 -- -- ns data setup time t dst 8 -- -- ns data hold time t dhd 8 -- -- ns // 70% t cw t dclk 1st 2nd last // // t dhd t dst 70% 70% 30% 30%
70% 30% t est // 70% t dclk : dclk period t cw : the width of dclk high b. timing diagram 1. vertical timing of input auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 11/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. horizontal timing of input c. timing parameters parameter symbol min typ max unit clock cycle 1/t dclk - 30 50 mhz horizontal cycle 1/th - 32.33 - khz vertical cycle 1/tv - 61.58 - hz horizontal signal horizontal cycle *1 th 880 928 1100 dclk horizontal display period thd - 800 - dclk horizontal blank thb 80 128 300 dclk vertical signal vertical cycle tv 500 525 680 h vertical display period tvd - 480 - h vertical blank tvb 20 45 200 h auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 12/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 5. power on/off characteristics a. recommended power on sequence the lcd adopts high voltage driver ic, so it could be p ermanently damaged under a wrong power on/off sequence. the suggested lcd power sequence is below: power on sequence: vdd dclkdisp led unit. b. recommended power off sequence power off sequence: led unitdisp dclk vdd. signals dclk, disp and de must be pulled low at power on. an y power on glitches at these signals can cause abnormal display. below is an example of de signal demonstrating a signal glitch power on and a correct signal power on. auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 13/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. d. optical specification all optical specification is measured under typical condition (note 1 , 2) item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 -- -- 15 20 20 25 ms ms note 3 contrast ratio cr at optimized viewing angle 250 300 -- note 4 top bottom left viewing angle right c r 1 0 -- -- -- -- 45 55 60 60 -- -- -- -- deg. note 5 brightness y l =0 400 480 -- cd/m 2 note 6 x =0 0.26 0.31 0.36 white y =0 0.28 0.33 0.38 x =0 0.585 0.635 0.685 red y =0 0.300 0.350 0.400 x =0 0.285 0.335 0.385 green y =0 0.485 0.535 0.585 x =0 0.095 0.145 0.195 chromaticity blue y =0 0.050 0.100 0.150 uniformity y l % 70 75 -- % note 7 note 1: measured under ambient temperature =25 , and led lightbar current i l = 20ma in the dark room. note 2: to be measured on the center area of panel with a viewing cone of 1 by t opcon luminance meter bm-5a, after 15 minutes operation. center of the screen field=1 bm-5a auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 14/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note 3: definition of response time: the output signals of photo detector are measured wh en the input signals are changed from black to white (falling time) and from white to black (rising time), respectively. the response time is defined as the time interval be tween the 10% and 90% of amplitudes. refer to figure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% note 4.definition of contrast ratio: contrast ratio is calculated with the following fo rmula. status black" " at is lcd when output detector photo status white" " at is lcd when output detector photo (cr) ratio contrast = note 5. definition of viewing angle, , refer to figure as below. x' y x y' auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 15/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. x' y x y' x' y x y' note 6: measured at the center area of the panel whe n all the input terminals of lcd panel are electrically opened. note 7: luminance uniformity of these 9 points is d efined as below: 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 16/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. e. reliability test items no. test items conditions remark 1 high temperature storage ta= 8 0 240hrs 2 low temperature storage ta= -3 0 240hrs 3 high ttemperature operation tp= 7 0 240hrs 4 low temperature operation ta= -2 0 240hrs 5 high temperature & high humidity tp= 6 0 . 90% rh 240hrs operation 6 heat shock -25 ~ 7 0 , 5 0 c y c l e , 2 h r s /cycle non-operation 7 electrostatic discharge contact = 4 kv, class b air = 8 kv, class b note 5 frequency range : 10 ~ 55 hz stoke : 1. 5 mm sweep : 10hz~55hz~10hz 2 hours for each direction of x,y,z 8 vibration 4 hours for y direction non-operation jis c7021, a-10 condition a : 15 minutes 9 mechanical shock 100g . 6ms, x,y,z 3 times for each direction non-operation jis c7021, a-7 condition c 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C6db/octave from 200~500hz iec 68-34 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces 12 pressure 5kgf, 5sec note 6 note 1: ta: ambient temperature. tp: panel surface temp erature note 2: in the standard conditions, there is not di splay function ng issue occurred. all the cosmetic specification is judged before the reliability stre ss. note 3: all the cosmetic specification is judged be fore the reliability stress. auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 17/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. note 4: temperature and relative humidity range is s hown in the figure below note 5 : all test techniques follow iec6100-4-2 sta ndard. test condition note pattern procedure and set-up contact discharge 330?, 150pf, 1sec, 5 point, 10times/point air discharge 330?, 150pf, 1sec, 5 point, 10times/point criteria b C some performance degradation allowed. no data lost. self-recoverable hardware failure. note 6: the panel is tested as figure. the jig is 10 mm made by copper with rubber and the loading speed is 3mm/min on position a~e. after the condition, no glass crack will be found and panel auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 18/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. function check is ok.( no guarantee lc mura lc bubble) loading lcm auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 19/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. f. packing and marking 1. packing form auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 20/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. 2. module/panel label information the module/panel (collectively called as the product) will be attached wi th a label of shipping number which represents the identification of the product at a specific locatio n. refer to the product outline drawing for detailed location and size of the label. the label is composed of a 22-digi t serial number with the following definition: example: 501m06zl06123456781z05: product manufacturing week code: wk50 product version: version 1 product manufactuing factory: m06 3. carton label information the packing carton will be attached with a carton label where packing qty, au o model name, auo part number, customer part number (optional) and a series of carton number in 13 or 14 digits are printed. the carton number is apparing in the following format: refer to the drawing of packing format for the location and size of the carton l abel. auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 page: 21/21 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permissio n from au optronics corp. g. precautions 1. do not twist or bend the module and prevent the unsuitable external force for displ ay module during assembly. 2. adopt measures for good heat radiation. be sure to use the module with in the speci fied temperature. 3. avoid dust or oil mist during assembly. 4. follow the correct power sequence while operating. do not apply the inval id signal, otherwise, it will cause improper shut down and damage the module. 5. less emi: it will be more safety and less noise. 6. please operate module in suitable temperature. the response time & brightness will dri ft by different temperature. 7. avoid to display the fixed pattern (exclude the white pattern) in a long period, otherwise, it will cause image sticking. 8. be sure to turn off the power when connecting or disconnecting the circuit . 9. polarizer scratches easily, please handle it carefully. 10. display surface never likes dirt or stains. 11. a dewdrop may lead to destruction. please wipe off any moisture before usi ng module. 12. sudden temperature changes cause condensation, and it will cause polarizer damaged. 13. high temperature and humidity may degrade performance. please do not expose the module to t he direct sunlight and so on. 14. acetic acid or chlorine compounds are not friends with tft display module. 15. static electricity will damage the module, please do not touch the module wit hout any grounded device. 16. do not disassemble and reassemble the module by self. 17. be careful do not touch the rear side directly. 18. no strong vibration or shock. it will cause module broken. 19. storage the modules in suitable environment with regular packing. 20. be careful of injury from a broken display module. 21. please avoid the pressure adding to the surface (front or rear side) of modul es, because it will cause the display non-uniformity or other function issue. auo confidential for promate internal use only / 2008/12/23 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A050VW01-V1

	To Download A050VW01-V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .