View FLC56XWC8V_7886532.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

to : specification of fujitsu tft-lcd module FLC56XWC8V approval this product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, person al use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter ?high safety requir ed use?), including without limita tion, nuclear reaction control in nuclear facility, aircraft flight control, air traffic cont rol, mass transport control, medical life support system, missile launch control in weapon system. if customer?s product possibly falls under the category of high safety required use, please consult with our sales representatives in charge before such use. in addition, fdtc shall not be liable against the customer and/or any third party for any claims or damages arising in connection with the high safety required use of the product without permission . specification no. : tech bes lcd-00175 issue date : may. 20. 2003 issued by : k. tanaka director design dept. technology div. fujitsu display technologies corporation date ?f by ?f www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 1 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation revision history revision date prepared checked approved summary 01 may/20/?03 nagatani nagatani k.tanaka 1 st issue 20021127 nagatani nagatani tanaka 29 03 20030526 nagatani k.tanaka p .12,19 revise,p .28,29 total revise 02 20030307 nagatani k.tanaka total revise www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 2 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation table of contents 1. applicati ons .......................................................................................................... 3 2. product name and model name 2-1.produc t name ......................................................................................................... 3 2-2.model name ............................................................................................................ 3 3. overvi ew ................................................................................................................. 3 4. configurat ion...................................................................................................... 3 5. mechanical speci fication s ........................................................................... 4 6. absolute maximu m ratings ........................................................................... 5 7. recommended operating condit ions....................................................... 5 8. electrical speci fication s ............................................................................. 6 9. optical specifi cations..................................................................................... 8 10.interface specifications 10-1.signal de scriptio ns ............................................................................................... 12 10-2.color data assignme nt ........................................................................................ 15 10-3.input sign al timing ............................................................................................. 16 10-4.correspondence between da ta and display position ......................................... 18 10-5.power suppl y sequence ....................................................................................... 18 11.backlight specifications 11-1.pin configurat ion for ba cklight ........................................................................... 19 11-2.ccfl ..................................................................................................................... 2 0 11-3.life...................................................................................................................... ... 20 12.appearance specifications 12-1.appear ance ........................................................................................................... 21 12-2.dot de fects ............................................................................................................ 21 13.environmental sp ecificati ons ................................................................. 23 14.indicati ons .......................................................................................................... 24 15.packag ing ............................................................................................................. 24 16.warrant y .............................................................................................................. 25 17.precauti ons ........................................................................................................ 25 18. miscella neous.................................................................................................. 27 outline dr awing................................................................................................. 28 www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 3 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 1. applications this specification is applied to the 22. 0 in. xga-wide supported tft-lcd module. 2. product name and model name 2-1. product name : lcd module 2-2. model name : FLC56XWC8V 3. overview this lcd module has a tft active matrix type liquid crystal panel 1280768 pixels, and diagonal size of 56cm (22.0-inch). this lcd has a lvds interface and can display 16,777,216 colors. the power supply of this lcd module is +12v dc single. this module has the characteristics for applying tco?99. 4. configuration this lcd module consists of a color tft-lcd panel that is mounted with tft driver ics, a cold-cathode fluorescent tube back-light. the inverter for the backlight is included. figure 4-1 shows a block diagram of this lcd module. www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 4 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 5. mechanical specifications table 5-1 shows the mechanical specifications of this lcd module. table 5-1. mechanical specifications item specifications unit remark dimensions 508.0316.033.8 (typ.) (exclude a inverter) mm display resolution (12803) 768 ? display dot area 480.0288.0 mm dot pitch (0.1253) 0.375 mm *direct lighting type backlight is used. *include a inverter. *inverter area thickness is (typ.40.4mm) *for details on dimensions,see dimensional outline drawing. (at page 32 to 33 fig.19-1,2,3) aspect ratio 1 : 1 ? weight 2,700 max g fg-sg short circuit ? tft color lcd panel 1280 x 3(rgb) x768 lvd s receiver dc/dc converter bias voltage supply circuit gate driver data driver inverter circuit back-light +12v dc rxo0 + rxo0 - rxo1 + rxo1 - rxo2 + rxo2 - rxo3 + rxo3 - rxoc + rxoc - sel lvds vcc (+12v) figure 4-1 block diagram internal circuit input signals (lvds) www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 5 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 6. absolute maximum ratings table 6-1 shows the absolute maximum rating of this lcd module. table 6-1. absolute maximum ratings item symbol condition min. typ. max. unit v cc ta=25oc ?0.3 ? 14.0 v supply voltage v inv ta=25oc ?0.3 ? 14.0 v input signal voltage v in ta=25oc ?0.3 ? 3.6 v control voltage v cnt ta=25oc ?0.3 ? v inv v brightness control voltage v vr4 ta=25oc 0 ? 4.0 v 7. recommended operating conditions table 7-1 shows the recommended operating conditions of this lcd module. table 7-1. recommended operating conditions item symbol min. typ. max. unit supply voltage (logic) v cc 11.5 12.0 12.5 v supply voltage (inverter) v inv 10.8 12.0 13.2 v ripple voltage v cc v rp ? ? 0.1 v www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 6 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 8. electrical specifications table 8-1 shows the electrical specifications of this lcd module. item symbol condition min. typ. max. unit remark differential-input voltage (high) v ih ? ? 100 mv differential-input voltage (low) v il v cm =+1.2v ?100 ? ? mv supply current i cc ? (610) (1200) ma *1 supply rush current i scc ? ? (4.7) a supply rush current duration (1a excess) t scc v cc =+12.00.5v v ss =0v dclk=65mhz 60hz ? ? (0.2) ms *2 supply current i inv v inv =12.0v v vr =0v ? (4.3) t.b.d a *3 brightness control voltage v vr 0 ? 3.5 v lighting frequency f v inv =12.0v, v vr =0v ? t.b.d ? khz lighting fix voltage vcnt 0 ? (0.8) v ?a ?` ?b ?j ?k ?h ?f ?g ?s non-lighting fix voltage vcnt (2.1) ? v inv (*1) typical current situation : vertical gray scale vcc=12.0v maximum current situation: pixel vertical line pattern. vcc=11.5v without rush current. (*2) these items prescribe the rush current for starting internal dc/dc. charging current to capacitors of vcc is not prescribed. (*3) external power supply for inverter shall ha ve the current capacity more than (16 )a of the supply current (i inv ), otherwise the protective circuit of inverter (fuse) might not work. (*3) www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 7 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation note1) measurement circuit is based on fig.8-1. fig.8-1. measurement circuit note 2) equivalent circuit is based on fig.8-2 (a), (b). fig.8-2 (a) equivalent circuit of logic signal input fuse: kab240240-4a (matsuo electric co. ltd) emi filter: sgm45c1h222 (sumitomo metal electronics devices inc) fig.8-2 (b) equivalent circuit of power supply fuse (4a) gnd v cc fg ?i frame ground ?j emi filter internal circuit 10 f 100pf driver logic +12v gnd +12v gnd icc ?k?b?c modul e vcc dc/dc converter back- light input signals(lvds-1ch) rxclk+ rxclk- rx0+ rx0- rx1+ rx1- rx2+ rx2- rx3+ rx3- sel lvds + ?\ internal circuit differential input 100 ?? lvds receiver inverter ?h l v l lvds receiver: ds90cf386(national semiconductor) or thc63lvdf84b(thine electoronics) www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 8 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 9. optical specifications table 9-1 shows the optical specif ications of this lcd module. table 9-1. optical specifications ta=25o c specifications remark item symbol condition min. typ. max. unit note horizontal ?? ?k?c?q ?? ?t?c?c =0 ?? 85 ? ? deg vertical ?? ?t?c?c ?? ?k?c?q =0 ?? 85 ? ? deg visual angle all direction ?? cr ?? 10 ? 80 ? deg (1)(2) (3)(5) (6) contrast ratio cr ?? ?k?c?q?c?t?c?c =0 ?? (400 ?j 600 ? ? white/ black (1)(2) (3)(5) ta=25 ? c ? 15 30 ms response time (on) (b ? w) ?? ???? ?? ?k?c?q?c ?t?c?c =0 ?? ta=0 ? c ? 50 100 ms ta=25 ? c ? 10 25 ms response time (off) (w ? b) ?? ?????? ?? ?k?c?q?c ?t?c?c =0 ?? ta=0 ? c ? 50 100 ms response time (on or off) (all gray scale) t avg ?? ?k?c?q?c ?t?c?c =0 ?? ta=25 ? c 603hz ? 15 ? ms average of response time (1) (4) (5) brightness ?h 400 500 cd/m 2 (1)(5) brightness uniformity ??h 70 ? ? ?? (1)(5) (7) ?? 0.253 0.283 0.313 ? w ?? ?? ?k?c?q?c?t?c?c =0 ?? ?u ?b?b =12.0v v inv =12.0v (at maximum brightness) 0.267 0.297 0.327 ? white *1 red (x=0.637 y=0.353 ) typ. green (x=0.287 y=0.598) typ. chromaticity r g b ?i???c???j blue (x=0.142 y=0.075) typ. (1) (5) lcd panel type tft color display mode normally black wide viewing angle technology mva -premium optimum viewing angle ? (symmetry) (6) display color 16,777,216 (8-bit color) color of non-display area black surface treatment clear , hard coating, low reflection (*1) specified value is measured in 20~30 minutes after lighting on (the simplicial module , center point). a required value may not be achieved on conditio n that lcd module is built in the cabinet because of its radiation. (note1) ?cs-1000 (minolta co., ltd.) , bm-5a(topcon) or equivalent luminance colorimeter should be used for the measurement. field=2o, l=500mm ?the specified value of viewing angle, contrast, brightness, brightness uniformity and chromaticity are under the dark room condition (1lux or less). www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 9 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation note 1) definition of viewing angle (1) based on fig.9-2. * u =0o, d =0o, l =0o, r =0o fig.9-2. definition of viewing angle (1) note 2) definition of viewing angle (2) based on fig.9-3. fig.9-3. definition of viewing angle (2) note 3) definition of contrast ratio (cr) determined by formula (1) based on fig.9-4.voltage-brightness characteristics. l w (brightness at white) = -------- (1) l b (brightness at black) 0 fig.9-4. voltage-brightness characteristics *0o ( front ) y + top (12 o?clock direction) lcd module x ? y ? bottom (6 o?clock direction) x + right (3 o?clock direction) l l,r,u,d =0o panel drive voltage [v] brightness ?m l ?n white l ?a 0 black l ?v www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 10 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation note 4) definition of response time based on fig.9-5. on off 100% 0% fig.9-5. definition of response time note 5) contrast ratio and response measurement system based on fig.9-6. fig.9-6. contrast ratio and re sponse time measurement system drive signal of lcd panel non-select status select status non-select status relative brightness black t on t off 90% 10% on response time off response time drive and measurement system y + y ? x + z + z ? x ? brightness meter or luminance colorimeter (with luminosity correction function) black white www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 11 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation note 6) definition of optimum viewing angle based on fig.9-7. fig.9-7. definition of viewing angle note 7) definition of brightness uniformity brightness uniformity is define d by the following formula. brightness (i1~i9) art measured at the followin g 9 points ( 1 ~ 9 ) on the display area shown in fig.9-8. |min. in| brightness uniformity ( ? l) = 100 (%), n=1 to 9 |max. in| 192 640 1088 1 4 7 115 2 5 8 384 3 6 9 653 note) each measurement point ( 1 ~ 9 ) de fines the center spot of brightness meter view. the tolerance of measurement position is 3mm. fig.9-8. measurement points 10 (-) (+) 0 6 o?clock viewing angle 12 o?clock max contrast ratio www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 12 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 10. interface specifications 10-1-1. signal descriptions table 10-1 shows the description and conf iguration of interface signals (cn1). table 10-1-1. interface signals (cn1) pin ?? symbol i/o function 1 vdd ?| +12v power su pp l y 2 vdd ?| +12v power su pp l y 3 gnd ?| ground 4 gnd ?| ground 5 rx0- ?h lvds receiver si g nal ( - ) 6 rx0+ ?h lvds receiver si g nal ( + ) 7 gnd ?| ground 8 rx1- ?h lvds receiver si g nal ( - ) 9 rx1+ ?h lvds receiver si g nal ( + ) 10 gnd ?| ground 11 rx2- ?h lvds receiver si g nal ( - ) 12 rx2+ ?h lvds receiver si g nal ( + ) 13 gnd ?| ground 14 rxcl k - ?h lvds receiver clock si g nal ( - ) 15 rxclk+ ?h lvds receiver clock si g nal ( + ) 16 gnd ?| ground 17 rx3- ?h lvds receiver si g nal ( - ) 18 rx3+ ?h lvds receiver si g nal ( + ) 19 gnd ?| ground 20 sel lvds i select lvds data order hi : table 10-1-2 open or low : table 10-1-3 upper side interface connector lcd module rear side 20 lower side signal interface connector ?f d14h-20p-1.25h(hirose) user?s connector ?f df14-20s-1.25 (hirose) 1 inverter connector back light interface connector ?f s10b-ph-sm3-tb (jst) s6b-ph-sm3-tb (jst) user?s connector ?f phr-12(jst) phr-6(jst) ?b 03 20030526 correct fig.,connector ?b ?b www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 13 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 10-1-2. lvds data mapping 1 table 10-1-2 shows the lvds data mapping 1.(sel lvds = high) table 10-1-2. lvds data mapping 1 pin input system side pin lcd module pin output 51 txin0 ?q?o 27 rxout0 ?h?q?o 52 txin1 ?q?p 29 rxout1 ?h?q?p 54 txin2 ?q?q 30 rxout2 ?h?q?q 55 txin3 ?q?r 32 rxout3 ?h?q?r 56 txin4 ?q?s 33 rxout4 ?h?q?s 2txin5 ?q?v txout3- txout3+ 17 18 rx3- rx3 + 34 rxout5 ?h?q?v 3txin6 ?q?t 35rxout6 ?h?q?t 4txin7 ?f?o 37rxout7 ?h?f?o 6txin8 ?f?p 38rxout8 ?h?f?p 7txin9 ?f?q 39rxout9 ?h?f?q 8 txin10 ?f?u 41 rxout10 ?h?f?u 10 txin11 ?f?v 42 rxout11 ?h?f?v 11 txin12 ?f?r 43 rxout12 ?h?f?r 12 txin13 ?f?s 45 rxout13 ?h?f?s 14 txin14 ?f?t 46 rxout14 ?h?f?t 15 txin15 ?a?o 47 rxout15 ?h?a?o 16 txin16 ?a?u 49 rxout16 ?h?a?u 18 txin17 ?a?v 50 rxout17 ?h?a?v 19 txin18 ?a?p txout1- txout1+ 8 9 rx1- rx1+ 51 rxout18 ?h?a?p 20 txin19 ?a?q 53 rxout19 ?h?a?q 22 txin20 ?a?r 54 rxout20 ?h?a?r 23 txin21 ?a?s 55 rxout21 ?h?a?s 24 txin22 ?a?t 1 rxout22 ?h?a?t 25 txin23 reserved txout3- txout3+ 17 18 rx3- rx3+ 2 rxout23 not use 27 txin24 reserved 3 rxout24 not use 28 txin25 reserved 5 rxout25 not use 30 txin26 enab 6 rxout26 ?d?m?`?a 50 txin27 ?q?u txout3- txout3+ 17 18 rx3- rx3 + 7rxout27 ?h?q?u txout0- txout0+ txout0- txout0+ 31 txclkin txout2- txout2+ txout2- txout2+ txclkout- txclkout+ symbol dclk transmitter ( ds90cf385) lcd control input interface connector receiver ( ds90cf386) txout1- txout1+ txout3- txout3+ txout1- txout1+ txout3- txout3+ 17 18 11 12 11 12 5 6 5 6 8 9 17 18 14 15 rx0- rx0+ rx0- rx0+ rx1- rx1+ rx3- rx3+ rx1- rx1+ rx3- rx3+ rx2- rx2+ rx2- rx2+ 8 9 rxclkout ?c?b?k?j rxclk- rxclk+ 26 www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 14 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 10-1-3. lvds data mapping 2 table 10-1-3 shows the lvds data mapping 2.(sel lvds = open or low) table 10-1-3. lvds data mapping 2 pin input system side pin lcd module pin output 51 txin0 ?q?q 27 rxout0 ?h?q?q 52 txin1 ?q?r 29 rxout1 ?h?q?r 54 txin2 ?q?s 30 rxout2 ?h?q?s 55 txin3 ?q?t 32 rxout3 ?h?q?t 56 txin4 ?q?u 33 rxout4 ?h?q?u 2txin5 ?q?p txout3- txout3+ 17 18 rx3- rx3+ 34 rxout5 ?h?q?p 3txin6 ?q?v 35rxout6 ?h?q?v 4txin7 ?f?q 37rxout7 ?h?f?q 6txin8 ?f?r 38rxout8 ?h?f?r 7txin9 ?f?s 39rxout9 ?h?f?s 8txin10 ?f?o 41rxout10 ?h?f?o 10 txin11 ?f?p 42 rxout11 ?h?f?p 11 txin12 ?f?t 43 rxout12 ?h?f?t 12 txin13 ?f?u 45 rxout13 ?h?f?u 14 txin14 ?f?v 46 rxout14 ?h?f?v 15 txin15 ?a?q 47 rxout15 ?h?a?q 16 txin16 ?a?o 49 rxout16 ?h?a?o 18 txin17 ?a?p 50 rxout17 ?h?a?p 19 txin18 ?a?r txout1- txout1+ 8 9 rx1- rx1+ 51 rxout18 ?h?a?r 20 txin19 ?a?s 53 rxout19 ?h?a?s 22 txin20 ?a?t 54 rxout20 ?h?a?t 23 txin21 ?a?u 55 rxout21 ?h?a?u 24 txin22 ?a?v 1 rxout22 ?h?a?v 25 txin23 reserved txout3- txout3+ 17 18 rx3- rx3+ 2 rxout23 not use 27 txin24 reserved 3 rxout24 not use 28 txin25 reserved 5 rxout25 not use 30 txin26 enab 6 rxout26 ?d?m?`?a 50 txin27 ?q?o txout3- txout3+ 17 18 rx3- rx3+ 7rxout27 ?h?q?o txout0- txout0+ txout0- txout0+ 31 txclkin txout2- txout2+ txout2- txout2+ txclkout- txclkout+ symbol dclk transmitter ( ds90cf385) lcd control inpu t interface connector receiver ( ds90cf386) txout1- txout1+ txout3- txout3+ txout1- txout1+ txout3- txout3+ 17 18 11 12 11 12 5 6 5 6 8 9 17 18 14 15 rx0- rx0+ rx0- rx0+ rx1- rx1+ rx3- rx3+ rx1- rx1+ rx3- rx3+ rx2- rx2+ rx2- rx2+ 8 9 rxclkout ?c?b?k?j rxclk- rxclk+ 26 www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 15 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 10-2. color data assignment table 10-2 shows the color data assignment. table 10-2. color data assignment color and input data ?i?o?f low level ?c?p?f high level ?j brightness r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 basic color black blue green cyan red magenta yellow white 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 red black darker ? brighter ? red 0 1 2 ?f ?f 253 254 255 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 1 : : : 0 1 1 0 1 0 : : : 1 0 1 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 green black darker ? brighter ? green 0 1 2 ?f ?f 253 254 255 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 1 : : : 0 1 1 0 1 0 : : : 1 0 1 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 blue black darker ? brighter ? blue 0 1 2 ?f ?f 253 254 255 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 0 0 0 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 0 : : : 1 1 1 0 0 1 : : : 0 1 1 0 1 0 : : : 1 0 1 note.1) definition of gray scale : colo r (n) ---?n? indicates gray scale level. the gray scale is brighter as the number is larger. note.2) data; 1: high, 0: low note.3) by inputting 8-bit data signal for each red, green and blue, this module can display 256 gray scale independently for each color. therefore, the module is able to displa y 16 million colors. color data are 24 lines. www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 16 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 10-3. input signal timing table 10-3 and fig.10-3 shows the input signal timing. table 10-3. timing characteristics (t=0~50o c , vcc=120.5v) item symbol min. typ. max. unit remark dclk signal period tc (12.500) 15.382 (20.000) ns (clock) frequency fc (50.00) 65.01 (80.00) mhz fc=1/tc duty tch/tc 45 50 55 ?? *1 high time tclkh 5.0 ? ? ns low time tclkl 5.0 ? ? ns rise time tclkr ? ? 5.0 ns fall time tclkf ? ? 5.0 ns dclk-data setup time tset 4.5 ? ? ns timing hold time thold 6.5 ? ? ns horizontal period th (1340) 1344 (2000) dclk frequency fh (46.6) 48.3 (55.5) khz display period thd 1280 1280 1280 dclk *2,3 vertical period tv (776) 806 806 th 16.67ms frequency 1/tv ? 60 ? hz display period tvd 768 768 768 th *2,3 data-enab timing data-enab timing tdn 0 0 0 dclk *4 *1) dclk signal input must be va lid while power supply is applied. *2) display position is specified by the enab signal only. ?e horizontal display position is specified by the rise of enab signal. the data which is latched by the falling edge of 1st dclk right after the rise of enab, is displayed on the left edge of the screen. ?e vertical display position is specified by the rise of enab after a ?low? level period equivalent to eight times of horizontal period . the 1st data corresponding to one horizontal line after the rise of enab is displayed at the top line of screen. *3) if a period of enab ?high? is less than 1280 dclk or less than 768 lines, the rest of the screen displays black. *4) the display position does not fit to the screen if a period of enab ?high? and the effective data period do not synchronize with each other. www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 17 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation dclk r0-7 g0-7 b0-7 r0-7 g0-7 b0-7 enab r0-7 g0-7 b0-7 enab dclk r0-7 g0-7 b0-7 enab fig.10-3.input signal timing chart tch tc tc1 tset thold 1.65v 2.3v 0.9v tclkh tclkl tclkr tclkf 2.3v 0.9v th thd 1278 0001 0002 0003 0004 0005 0006 1274 1275 1276 1277 1279 1280 tdn=0clk tdn=0clk tc c001 c768 tvd tv www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 18 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 10-4. correspondence between data and display position fig.10-4 shows the correspondence between data and display position . r 0001 g 0001 b 0001 r 0002 g 0002 b 0002 r 0003 g 0003 g 1280 b 1280 r 0001 g 0001 b 0001 r 0002 g 0002 b 0002 r 0003 g 0003 g 1280 b 1280 fig.10-4.correspondence data and display position 10-5. power supply sequence the sequence of input signals and on/off of th e power supply of this lcd module should be in the specification shown in fig.10-5 to preven t latch-up of the driver ics and dc driving of the lcd panel. fig.10-5. power supply sequence s0001 s0002 s0003 s0004 s0005 s0006 s0007 s0008 s3839 s3840 c001 c768 ?` t4 ?? 20ms ( volta g e descent ) 0ms ?? t5 ?? 40ms t2 10.8v 10.8v (10.5v) 1 ?? t1 ?? 20ms 10.8v 90% 10% 0.5v 0.5v 0.5s ?? t7 ?` ?` ?` on off (0v) h l dclk should be in a range of the spec.(frequency etc. ?j of the lcd. 0ms ?? t2 ?? 40ms inputs should be in a rang e of the spec. of the lvds. tri-state tri-state t6 ?? 20ms v cc lvds differential input www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 19 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 11. backlight specifications 11-1. pin configuration for backlight table 11-1 shows the description and pin assignment of the connectors (cn-2,3) for the back-light of this lcd module. table 11-1-1 pin assignment of cn-2 connector : s10b-ph-sm3-tb user?s connector: phr-10 supplier: japan so ?? derless terminal manufacturing co.ltd. note1) n.c terminal should keep open. table 11-1-2 pin assignment of cn-3 connector : s6b-ph-sm3-tb user?s connector: phr-6 supplier: japan so ?? derless terminal manufacturing co.ltd. note1) n.c terminal should keep open. note2) v vr input: 0v=max. brightness 3.5v=min. brightness note3) vcnt input: 0v=bl turn on 2.1v or more = bl turn off note4) keep the circuit gnd (cn-3 6pin) apar t from high-voltage gnd (cn-2 6-10pin). otherwise, the screen may cause flickering. pin ?? signal function 1 v inv power supply 2 v inv power supply 3 v inv power supply 4 v inv power supply 5 v inv power supply 6 gnd ground (high voltage) 7 gnd ground (high voltage) 8 gnd ground (high voltage) 9 gnd ground (high voltage) 10 gnd ground (high voltage) pin ?? signal function 1 v vr brightness control 2 n.c. n.c. 3 n.c. n.c. 4 v cnt lighting control 5 n.c. n.c. 6 gnd ground (low voltage) 03 20030526 correct connector type ?b www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 20 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 11-2 ccfl supplier: sanken electronics co.ltd. part no.: t.b.d 11-3 life the life of the back-light is a minimum of 50,000 hours at the following conditions. (1) working conditions ?@ ambient temperature ?f 25 ?} 5 ?? ?a brightness control (vvr) ?f 0v (2) definition of life ?@ brightness becomes 50% or less than the minimum brightness value shown in table 9-1. ?a the lamp no longer lights ?b lamp being flashing or flickering. www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 21 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 12. appearance specifications 12-1.appearance table 12-1 shows the appearance specifications . in the case of another agreement about specification arises, that agreement takes priority. table12-1 appearan ce specifications length: l[mm], width: w[mm] allowable number of pieces: n, average diameter: d [mm] ?? item judgment method and standard remarks white and black points d ?? 0.5 0.5 < d n ?? 10 n ?? 0 dark line w ?? 0.1 l ?? 12.0 n ?? 10 1 foreign particle fiber bright points d ?? 0.3 0.3 < d ?? 0.6 d> 0.6 not count n ?? 12 n ?? 8 2 scratch scratch on polarizer film 12.0 > l n ?? 15 3 dent dent on polarizer film d ?? 0.3 0.3 < d ?? 0.4 not count n ?? 15 note ?e foreign particle and scratch that do not effect di splay image, such as fo reign particle between glass and polarizer film out of the display area , scratch on metal bezel, backlight module or polarizer film out of the display area are not counted. ?e unwiped dirt out of the display area is not counted. ?e these items are applied to the defects in the cell when backlight is on, and defects on the surface of the polarizer film at the display area. ?e must be observed the lcd screen from the normal direction unless specified. the distance between the lcd screen and the observing position should be 35cm or more. one 20w fluorescent lamp is used at 50cm above the worktable. at this time, the luminance at the vertical di rection to the fluorescen t lamp is 300 to 600 lux (reference value). ?e appearance specifications ar e defined under the condition of frame frequency at 60hz. (include bright and dark points specifications) 12-2.dot defects (bright spots, dark spots) 12-2-1.area to be inspected inside display dot area (480.0 x 288.0mm) display dot area means active area. one pixel consists of 3 dots (red, green and blue). 12-2-2.bright spots definition (1) bright spots are classified as fo llows. (based on brightness samples) ?e visible through 2% nd filter ................................................... high-bri ght spot ( r,g ) ?e visible through 5% but invisible through 2% nd filter ......... low-bright spot( r,g,b ) ?e invisible through 5% nd filter................................................ not counted www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 22 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation (2) tears, breaks, etc in color filter visible by the light passing through. ?e bigger than a half dot .............................................................. high brig ht spot ?e a half dot or sma ller ................................................................ not counted (3) tears, breaks, etc in black matrix visible by the light passing through. ?e diameter above 50 ? m ............................................................ high-bri ght spot ?e diameter of 50 ? m or smaller ................................................. not counted 12-2-3. number of bright spot standard item entire screen brightness classification high-bright spots high and low bright spots number of defects 15 or less 22 or less notes ?f 1.display should be all black when bright spots are counted. 2.number of two high bright sp ots connections is up to 3. 3.number of two low bright sp ots connections is up to 12. 4.number of three bright spots connections and tw o high bright spots vertical connections is 0. 5.number of high bright spots and low bright spots connections is up to 5. 12-2-4. distance between bright spots ?e distance between bright spots( not include b) ...... 15 mm or more ?e distance between bright spots( include b) ............ 5 mm or more (distance to the third defect should be 20mm or more) 12-2-5. number of dark spots standard item entire screen number of defects 24 or less number of two dark spot connections 12 or less (not include vertical, horizontal and diagonal connections) number of three dark spot connections 3 or less notes ?f 1. display should be all white when dark spot is counted. 2. distance between defects is 5 mm or more. (distance to the third defect should be 20mm or more) 3. if dark spot size is smaller than on e dot, convert with following rule and sum up. (a) a ?? 1 ?^ 3 : not counted. (b) 1 ?^ 3 ?? a ?? 2 ?^ 3 : considered as 0.5 dot. (c) 2 ?^ 3 ?? a : considered as 1 dot. (a= dark spot size ?^ dot size) www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 23 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 13. environmental specifications table 13-1 shows the environmental specifications. table 13-1. environmental specifications item condition remark operation 0~45o c temperature storage -20~60o c note1 operation 20~85%rh humidity storage 5~85%rh maximum wet-bulb temperature should not exceed 29o c . no condensation. vibration non-operation 10~500hz, 1 cycle/20minute, 2g, 1.5mm max, 2hour each x, y and z directions shock non-operation 30g, 6ms, 1time each ?} x, ?} y and ?} z directions. for single module without package.(note2) note1: temperature on surface of lcd panel should be under (54) ?? . note2: table 13-2 and fig. 13-1 show the shock re sistance standard when module is packaged. table 13-2. shock resistance standard when module is packaged dropping location dropping height count a ~ j 60cm 1 time fig.13-1. direction to apply shock to package f ( side face ) g (top face) e ( side face ) c (edge) i (front face) b (edge) d (edge) h (bottom face) a (corner) j ( rear face ) www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 24 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 14. indications this module has the following indications. (1) product name : lcd unit (2) model number : FLC56XWC8V (3) product drawing number : na19026-c951 (4) manufacturing number : 3 5 0 0 0 0 1 (5) version number : 01a (example) -1st 2 digits ?01? means operational version. -3rd alphabet means functional version. (6) country of origin : made in japan (7) company name : fujitsu display technologies corp. (8) caution when changing cold-cathode tubes and disposal method of them. (see fig. 14-1) 15. packaging separately specified in packaging specifications. 15-1. packaging specifications (1) 5 lcd modules / 1 package. (2) weight: approximately (14) kg / 1 package. (3) outline dimensions : (t.b.d) mm(w) ?~ (t.b.d) (d) ?~ (t.b.d) mm(h) 15-2. packaging method fig.15-2 (a),(b),(c),(d) show the packing method. serial number (to be reset every month on 1st.) manufacturing month (oct. = x, nov. =y, dec. =z) last digit of manufacturing year. ?e when changing cold cathod e fluorescent lamps, follow operating specifications. especially be careful about the lamp ? s side-edge. ?e ?u??????e??????d?l????]????s????o?3??b???u?????z???_????g?b?w??c?e?a??? ?o?3??b ?e this tft color lcd contains co ld cathode fluorescent lamps. please follow local or dinances or regulations for its disposal. ?e ???y?t???f?b?x?v???c???j?b?g???u?????a?g?y?????????????a ?n?????????e??????k???]????p?????o?3??b fig.14-1 lcd unit made in japan FLC56XWC8V 3500001 na19026-c951 01a fujitsu display technologies corp. fig.14-2 product label (example) www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 25 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation 16.warranty the warranty period is one year after shipping. products which fail during this period are repaired or replaced without charge, unless the failure is caused by user. 17.precautions adhere to the following precautions to properly use this lcd module. (1) fail safe design lcd module has an inherent chance of failure. customers must protect against injury, damage or loss from such failures by incorp orating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. (2) handling of lcd panel ?@ do not apply any strong mechanical shock to the lcd panel. since the lcd panel is made of glass, exce ssive shock may damage the panel or cause a malfunction. ?a do not press hard on the lcd panel surface. in the lcd panel, the gap between two glass plates is kept precisely and uniformly to maintain display?s characteristics and reliabi lity. if this panel is pressed hard, the following troubles occurs. (a) ununiformity of color (b) orientation of liquid cr ystal becomes disordered problem (a) returns to normal after a while. problem (b) returns to normal if power is shut off once then turned on again. however these operations should be avoided to insure reliability. ?b do not scratch the polarizer film on the lcd panel surface. ?do not press or rub the display surface with a hard tool, pincet, etc. ?for handling, use cotton or conductive gloves so that the display surface is not stained. ?for if the display surface is stained by dust or dirt, clean it as follows with a soft cloth (deer skin, etc.) [dust] wipe off with a soft cloth. (do not rub.) [dirt ] wipe off lightly with a soft cloth af ter soaking in the clear water and squeezing hard out of water drops. only if the dirt is hardly wiped off, use isopropyl alcohol or ethanol. be careful not to splash the water or the solvent and water penetrated between the polarizer and the lcd panel. do not use solvents such as ketone (acetone, etc.) and aromatics (xylene, toluene, etc.) ?if saliva or water drops are left for long time, it may deform partial deformation or discolored. wipe off immediately in the same way as for dirt. ?do not allow oil to adhere to the module , since the cleaning of oil is difficult. ?c do not place or contact objects on the display surface for a long period of time. that?s because this may make some parts of the lcd module distorted and the display quality may decline. www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 26 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation (3) handling of lcd module ?@ assemble the module into user?s system in a dust free environment. if conductive foreign matter adheres to the module, failures may occur. ?a take anti-static measures for assembling the module. since the lcd module contains cmos-ics, the following considerations are necessary. ? for assembling the module, operator sh ould be grounded and wear cotton or conductive gloves. ? floor of work area and work table to assemble the lcd module should be covered with electrostatic shielding in order to discharge static electricity via an earth wire. ? if necessary, ground operation tools (sol dering iron, radio pliers, pincet, etc.). ? do not take the module out of the conducti ve bag until the time when the module is assembled. ? assemble the module under low humidity (50%rh or less). ?b do not pull the connecting cable on the re ar face of the lcd module strongly. ?c do not disassemble or remodel the lcd module. if this lcd module is disassembled or remodele d, it may have some trouble, or the display quality and reliability may not be assured. (4) precautions for operating the lcd module ?@ adhere to the specified power supply sequence. if not followed, the cmos-ic may cause a latc h-up, or the dc voltag e may be applied the liquid crystal, and a failure or serious dete rioration in display quality may occur. ?a do not operate the lcd module when condensation is present. if the lcd module is operated when condensa tion is on the terminals of the lcd panel, the terminals cause electrochemical reaction, and may reach disconnection. condensation easily occurs especially when the module is moved from a cold environment to a warm environment. ?b trouble that occurs when the lcd module is used at not recommended temperature. ? operation at high temperature(>60o c) :display colors shift to blue. ? storage at high temperature (>60oc) :the polarizer film deteriorates and contras decreases. ? operation at low temperature (<0oc) :the response speed decreases considerably. ? storage at low temperature (<-20oc) :t he liquid crystal may solidify and become damaged. ?c always input the control signals at the correct timing. if control signals (dclk, or enab) are not inpu t, or if the timing is out of the specified timing, dc voltage may be applied to the liq uid crystal and, as a result, cause image sticking or deterioration of contrast. (5) precautions on designing module mounting ?@ do not press the display surface an d bottom face of the lcd module. display quality or reliability may be deteriorated if the installation of the lcd module is inappropriate and, as a result, excessive pressu re is applied to the surface of lcd screen. brightness uniformity or the reliability of ccfl may decrease if the pressure is applied to the backlight module. www.datasheet.co.kr datasheet pdf - http://www..net/
?y FLC56XWC8V ?z 27 edit date appr. check desig. description cust. ?r ?g ?d ?d ?s / date document control section 1 d d e f b a desig. check appr. FLC56XWC8V tech bes lcd-00175 1 2 3 4 a b c c fujitsu display technologies corporation ?a consider the module mounting design, so that twisting and bending do not occur to the lcd module. excessive twisting and bending may da mage display quality and reliability. ?b the power cable length between the lcd modu le and inverter should not be extended. otherwise the backlight may not light or flickering may occur. ?c do not make the power cable of the bac klight clung to a metal plate, etc. backlight frequency current for backlight dr iving may leak to the metal and desired brightness may not be assured. ?d when mounting lcd module with m3 s crew(x4) should be screw up under 30n . cm torque. (6) storage method ?@ do not store the lcd module in an atmosphe re of organic solvent or corrosive gas. in an organic solvent atmosphere, the pola rizer film discolors and display quality deteriorates. in a corrosive gas environment, various problems may occur. ?a store the lcd module in a fujitsu package. at storing, fujitsu packages can be stacked up to (t.b.d) boxes. the lcd module is in an anti-static bag. keep the module in that status. ?b it is recommended that the storage environm ent should be humidity controlled, cool and dark. recommended storage environment ?place :dark (avoid direct sunlight) ?temperature : 10~35oc ?humidity : 50~60%rh note) if the module is left in an environment of 60 ?? or more for a long period of time, optical characteristics may deteriorate. (7) storage method ?@ if the lcd panel is damaged, do not inhale or allow the liquid crystal to enter the mouth if the liquid crystal contacts the body or clot hs, wash it off with soap immediately. follow precautions for regular electronic components. ?a solder flux on the printed circuit board is harmless to the quality and reliability of lcd module. fujitsu is practicing non-wash tec hnology on module assembly process. 18. miscellaneous specifications of the tft-lcd panel and other components used in the lcd module are subject to change. both parties sha ll discuss together before change. if any doubt is raised in the content of the sp ecifications, both parties shall discuss and make best effort for the agreement. www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of FLC56XWC8V

	To Download FLC56XWC8V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .