rcec 400 www.vishay.com vishay mcb revision: 18-sep-14 1 document number: 32507 for technical questions, contact: mcbfixedresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power resistors cooled by auxiliary heatsink (not supplied) thick film technology features ? system without external radiation ? high power / volume ratio ?non-inductive ? screw-on outputs ? possible configuration with 2 or 3 resistors note (1) on request. standard electrical specifications model value resistance range ? max. rated power p 75 c w tolerance % temperature coefficient ppm/c e-series ohmic values rcec 400 single 1.0 to 1m 400 10, 5 (1) 150 (typical) e 12 double 1.5 to 1m 2 x 180 10, 5 (1) 150 (typical) e 12 mechanical specifications ul 94 flame classifications material in accordance with ul 94 v-0 resistive element thick film substrate alumina encapsulation resin filled in housing technical specifications parameter single value double value operating temperature range -55 c to +150 c maximum operating voltage 4000 v dielectric strength v rms (50 hz / 1 min) 6000 v creepage distance > 42 mm clearance distance > 12 mm > 10 mm cti index > 600 partial discharge < 20 pc at 5000 v eff inductance < 40 nh insulation resistance 10 5 m ? at 500 v dc weight (max.) 75 g
rcec 400 www.vishay.com vishay mcb revision: 18-sep-14 2 document number: 32507 for technical questions, contact: mcbfixedresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) the higher of either value energy absorption single value repetitive operation: 2 j/t = 50 s ? other t values: consult us double value repetitive operation: 2 j/t = 50 s ? other t values: consult us dimensions in millimeters performances tests conditions requirements typical values momentary overload single value 800 w / 10 s 2 % 0.2 % double value 2 x 360 w / 10 s humidity (steady state) 56 da ys, 40 c, 95 % hr 2 % or 0.05 ? (1) 0.2 % vrt -55 c to +125 c 5 cycles 2 % or 0.05 ? (1) 0.2 % mechanical shock iec 60115-4 clause 2-3-6 0.5 % or 0.05 ? (1) 0.25 % vibration iec 60115-4 clause 2-3-2 0.5 % or 0.05 ? (1) 0.25 % terminals strength 130 nc m / 100 n 1 % or 0.05 ? (1) 0.1 % endurance 2000 cycles p n 30 min / 30 min 5 % 0.2 % ? 4.2 0.1 23 57 66 19.7 40 21
rcec 400 www.vishay.com vishay mcb revision: 18-sep-14 3 document number: 32507 for technical questions, contact: mcbfixedresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dissipation temperature rise as a function of the power applied overall thermal resi stance 0.1875 c/w (double value: 0.2083 c/w) permanent applicable power as a function of heatsink temperature overload intermittent overload (exceptional operation) assembly maximum tightening torque: ? 150 ncm, mechanical mounting ? 130 ncm, electrical mounting 10 100 1000 10000 0 10 20 30 40 50 60 70 80 0 102030405060708090100 axi s title 1 s t line 2nd line 1 s t line ? ( c) k (%) s ingle value: p = k x 150 double value: p = k x 400 ? = f (p) 10 100 1000 10000 0 25 50 75 100 050100150 axi s title 1 s t line 2nd line axi s title k (%) ( c) s ingle value: p = k x 400 double value: p = k x 180 10 100 1000 10000 0 1 2 3 4 1101001000 axi s title 1 s t line 2nd line 1 s t line k.p t ( s ) 57 0.2 m4 min. depth 5 thermal compound re s i s tance 0.05 c/w / 0.025 mm
rcec 400 www.vishay.com vishay mcb revision: 18-sep-14 4 document number: 32507 for technical questions, contact: mcbfixedresistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 cooling the temperature of the heatsink may be maintained at the specified values with: ? forced air ventilation ? internal circulation of a cooling liquid ? heatsink contact surface: ra 6.3 m ? evenness defect: 0.05 mm max. ? surface temperature gradient (isotherm): 20 c max. ? thermal compound not supplied (resistance ? 0.05 c/w / 0.025 mm) the user must select the thermal resistance of the heatsink according to the power applied. ordering information rcec 400 10 ? 10 % model type resistance value (double value: 2 x 10 ? for example) tolerance ( 5 % or 10 %)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|