to-220-3l plastic-encapsulate mosfets cjp75n75 n-channel power mosfet description the cjp75n75 uses advanced trench technology and design to provide excellent r ds(on) with low gate charge. good stability and uniformity with high e as .this device is suitable for use in pwm, load switching and general purpose applications. feature ? advanced trench process technology ? special designed for convertors and power controls ? high density cell design for ultra low r ds(on) ? fully characterized avalanche voltage and current ? fast switching ? good stability and uniformity with high e as ? excellent package for good heat dissipation ? special process technology for high esd capability application ? power switching application ? hard switched and high frequency circuits ? uninterruptible power supply maximum ratings (t a =25 unless otherwise noted) parameter symbol value unit drain-source voltage v ds 75 gate-source voltage v gs 20 v continuous drain current i d 75 pulsed drain current (note 1) i dm 300 a power dissipation (note 2 , t a =25 ) 1.8 w maximum power dissipation (note 3 , t c =25 ) p d 160 w single pulsed avalanche energy (note 4) e as 550 mj thermal resistance from junction to ambient r ja 69.4 /w junction temperature t j 150 storage temperature t stg -55 ~+150 notes 1. repetitive rating: pulse width limited by maximum junction temperature 2. this test is performed with no heat sink at t a =25 3. this test is performed with infinite heat sink at t c =25 4. e as condition: t j =25 ,v dd =37.5v,v gs =10v,l=0.5mh,r g =25 ? . to-220-3l 1. gate 2. drain 3. source 1 of 2 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
electrical characteristics (t a =25 unless otherwise noted) parameter symbol test condition min typ max unit static characteristics drain-source breakdown voltage bv dss v gs =0, i d =250a 75 gate-threshold voltage (note 1) v gs(th) v ds =v gs , i d =250a 2 4 v gate-body leakage current i gss v ds =0, v gs =20v 100 na zero gate voltage drain current i dss v ds =75v, v gs =0 1 a drain-source on-state resistance (note 1) r ds(on) v gs =10v, i d =40a 8 m ? forward transconductance (note 1) g fs v ds = 10 v, i d =40a 60 s dynamic characteristics (note 2) input capacitance c iss 3100 output capacitance c oss 310 reverse transfer capacitance c rss v ds =25v,v gs =0,f =1mhz 260 pf switching characteristics (note 2) turn-on delay time t d (on) 18.2 rise time t r 15.6 turn-off delay time t d(off) 70.5 fall time t f v dd =30v, i d =2a, r l =15 ? , v gs =10v,r g =2.5 ? 13.8 ns total gate charge q g 100 gate-source charge q gs 18 gate-drain charge q gd v ds =30v,v gs =10v,i d =30a 27 nc source-drain diode characteristics diode forward current i s 75 a diode pulsed forward current i sm 300 a diode forward voltage (note 1) v sd v gs =0, i s =40a 1.2 v diode reverse recovery time (note 2) t rr 33 ns diode reverse recovery charge (note 2) q rr i f =75a , di/dt=100a/ s 54 nc notes: 1. pulse test: pulse width 300s, duty cycle 2%. 2. these parameters have no way to verify. 2 of 2 4008-318-123 sales@twtysemi.com http://www.twtysemi.com product specification
|