1 publication date: december 2004 sdf00035aem data sheet semiconductor company matsushita electric industrial co., ltd. mn63y1050 MN63Y1005 part no. package code no.
mn63y1050, MN63Y1005 2 sdf00035aem mn63y1050, MN63Y1005 lsi for contact-less ic tag and card ? overview the mn63y1050 and MN63Y1005 are lsis for contact-le ss ic tags and cards with embedded feram. the feram supports low power consumption, high-speed data rate, and high endurance. rf interface conforms to the iso standard. ? features mn63y1050 ? long operation range of 35 cm ? write verify by only one command. MN63Y1005 ? proprietary protocol and high-speed data rate of 212 kbps which realize high performance communication. ? applications tags for logistics and fa, ic cards for royalty and security control. ? specifications 1120-bit (1024-bit) no 10 cm iso14443-b MN63Y1005 yes anti-collision function endurance cycle memory area (user area) non-volatile memory operation distance * data rate rf interface 100 million 512-bit (384-bit) feram 35 cm 26.49 kbps / 1.65 kbps iso15693 mn63y1050 212 kbps functions product * depending on the output power from r/w and the design of the antenna note : the detailed information for this product is disclosed after non-disclosure agreement between your company and mei.
request for your special attention and precautions in using the technical information and semiconductors described in this material (1) an export permit needs to be obtained from the competent authorities of the japanese government if any of the products or technical information described in this material and controlled under the "foreign exchange and foreign trade law" is to be exported or taken out of japan. (2) the technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. it neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) we are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) the products described in this material are intended to be used for standard applications or general elec- tronic equipment (such as office equipment, communications equipment, measuring instruments and house- hold appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus- tion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (5) the products and product specifications described in this material are subject to change without notice for modification and/or improvement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifica- tions satisfy your requirements. (6) when designing your equipment, comply with the guaranteed values, in particular those of maximum rat- ing, the range of operating power supply voltage, and heat radiation characteristics. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) when using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) this material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. 2003 sep
|
