hybrid ic v la308 - 01ar isolated type dc - dc converter description the vl a308 - 01a r is a n isolated dc - dc converter design - ed to control the industrial equipment. it can convert the high voltage to low voltage. total output power is 7.8 w. features ? input ------------ dc 22 0 v to 45 0 v dc ? output --------- -- + 12 v, 650m a ( 7.8 w) ? electrical isolation (between input and output s ) ------------- 2 500vrms 1 minute applications on board p ower supply for control equipment outline drawing dimensions : mm block diagram v in vla308 - 01ar over current protection
hybrid ic v la308 - 01a r isolated type dc - dc converter 2 maximum ratings (unless otherwise noted, ta=25 c) symbol par ameter conditions ratings unit v in input voltage between pins 1 - 5,6 4 5 0 v i o output current between pins 17,18 - 19,20 650 m a topr operating temperature no condensation - 2 0 ~ + 6 0 c tstg storage temperature no condensation - 2 5 ~ +8 0 c viso electri cal isolation between input and output sine wave voltage, 60hz, 1min 2 500 vrms electrical characteristics (unless otherwise noted, v in = 28 0 v, ta=25 c) symbol parameter test conditions limits unit m in . t yp . m ax . v in input voltage recommended range 220 280 450 v vo output voltage io1= 0~65 0ma 11.4 12.0 12.6 v reg - i input regulation io=650ma , v in = 22 0~ 45 0v - - 240 mv reg - - l load regulation io =0~ 65 0ma - - 360 mv v p - p riple voltage io=650ma 1 - 250 - mv efficiency io=650ma, - 7 4 - % 1 n ot contain the spike noise te st circuit diagram caution it is used the electrolytic capacitors which has the low impedance for output capacitor. brank pin ? 2~4, 11~13 pin, nc pin ? 9,10,14~16 pin vla308 - 01ar 10 f 1000
hybrid ic v la308 - 01a r isolated type dc - dc converter 3 for safety using great detail and careful attention are given to the production activity of hics, such as the development, the quality of production, and in its reliability. however the reliability of hics depends not only on their own factors but also in their condition o f usage. when handli ng hics, please note the following cautions. cautions packing carrying storage extended storage maximum ratings polarity the materials used in packing hics can only withstand normal external conditions. when exposed to outside shocks, rain and certain environmental contaminators, the packing materials will deteriorates. please take care in handling. 1) dont stack boxes t 2) boxes must be positioned correctly during transportation to avoid breakage. 3) don't throw or drop boxes. 4) keep boxes dry. avoid rain or snow. 5) minimal vibration and shock during transportation is desirable. when storing hics, please observe the following notices or possible deterioration of their electrical characteristics, risk of solderability, and external damage may occur. 1) devices must be stored where fluctuation of temperature and humidity is minimal , and must not be exposed to direct sunlight. store at the normal temperature of 5 to 30 degrees celsius with humidity at 40 to 60%. 2) avoid locations where corrosive gasses are generated or where much dust accumulates. 3) storage cases must be static proof. 4) avoid putting weight on boxes. when extended storage is necessary, hics must be kept non - processed. when using hics which have been stored for more than one year or under severe conditions, be sure to check that the exterior is free from flaw and other damages. to prevent any electrical damages, use hics within the maximum ratings. the temperature, current, voltage, etc. must not exceed these conditions. to protect hics from destruction and deterioration due to wrong insertion, make sur e of polarity in inserting leads into the board holes, conforming to the external view for the terminal arrangement.
hybrid ic v la308 - 01a r isolated type dc - dc converter 4 power module division 6 - 41 tsukuba, isahaya, nagasaki, 854 - 0065 japan sep . 20 14 keep safety first in your circuit designs! ? isahaya electronics corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. trouble with semiconductors may lead to personal inj ury, fire or property damage. remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (1)placement of substitutive, auxiliary circuits, (2)use of non - flammable material or (3)preventio n against any malfunction or mishap. notes regarding these materials ? these materials are intended as a reference to our customers in the selection of the isahaya products best suited to the customer's application; they don't convey any license under any intellectual property rights, or any other rights, belonging to isahaya electronics corporation or a third party. ? isahaya electronics corporation assumes no responsibility for any damage, or infringement of any third party's rights, originating in the use of any product data, diagrams, charts or circ uit application examples contained in these materials. ? all information contained in these materials, including product data, diagrams and charts, represent information on products at the time of publication of these materials, and are subject to change by isahaya electronics corporation without notice due to product improvements or other reasons. it is therefore recommended that customers contact isahaya electronics corporation or an authorized isahaya products distributor for the la test product information before purchasing a product listed herein. ? isahaya electronics corporation products are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. please contact isahaya electronics corporation or an aut horized isahaya products distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. ? the prior written approval of isahaya electronics corporation is necessary to reprint or reproduce in whole or in part these materials. ? if these products or technologies are subject to the japanese export control restrictions, they must be exp orted under a license from the japanese government and cannot be imported into a country other than the approved destination. any diversion or re - export contrary to the export control laws and regulations of japan and/or the country of destina tion is prohibited. ? please contact isahaya electronics corporation or an authorized isahaya products distributor for further details on these materials or the products contained therein.
|
