we reserve the right to make alterations and techni cal data printed. all technical data serves as a gu ideline and does not guarantee particular properties to any products. name of document: 30910002 index b status: 10/2009 platinum resistance temperature detector c 416 the c series thin-film prtds combine the ideal curve characteristics of ceramic wire-wound rtds with the vibration resistance of glass wire-wound rtds and represent a n excellent alternative to wire-wound rtds. they ar e characterized by high long-term stability, excellent temperature shock resistance and a wide temperature range of -1 96c to +500c. the deviation from the din en 60751 (according to i ec 751) characteristic curve is minimal over the ent ire temperature range, they show no hysteresis. these features make them best suited for applications in aerospace, ch emical and power generation plants and analytical equipment. specification din en 60751 nominal resistance 100 at 0c temperature range -196c to +500c tolerance class b: -196c up to +500c temperature coefficient tcr = 3850 ppm/k leads aupd- wire lead lengths (l) 10mm 1mm long-term stability max. r 0 -drift 0.03% after 1000 h at 500 c environmental conditions unhoused for dry environments only vibration resistance at least 40g acceleration at 10 to 2000 hz, depends on installation shock resistance at least 100g acceleration with 8ms half sine wave, depends on installation self heating 0.4 k/mw at 0c insulation resistance > 100 m at 20c; > 2 m at 500c response time water current (v= 0.4m/s): t 0.5 = 0.07s t 0.9 = 0.25s air stream (v= 2m/s): t 0.5 = 3.2s t 0.9 = 14.0s measuring current 100 : 0.3 to 1.0 ma (self heating has to be considered) note other tolerances, values of resistance and wire lengths are available on request. for brazing and soldering of the leads only brazing /solder alloys should be used which are specified for brazing/soldering to g old alloys. nominal resistance r0 tolerance din en 60751 1996-07 tolerance din en 60751 2009-05 order number plastic box 100 ohm at 0c class b f 0.3 32 208 519 the measuring point for the nominal resistance is d efined at 8mm from the end of the sensor body. 1901 route 130 north brunswick, nj 08902 phone 732-940-4400 fa x 732-940-4445 email info.hst-us@heraeus.com http://heraeus-sensor-technology-us.com heraeus sensor technology usa
|
