ver: 0.3 jun 28, 2013 tel: 886-3-5788833 http://www.gmt.com.tw 1 G5010 global mixed-mode technology dual-low on-resistance load switch with controlled turn-on features ? integrated dual channel load switch ? input voltage range: 0.8-v to 5.5v ? dual ultra-low on-resistance (10m ) ? 6a continuous switch current per channel ? low threshold control inputs ? adjustable slew-rate control ? quick output discharge transistor ? 10 pin aqfn package applications ? notebooks / netbooks ? tablet pcs ? consumer electronics ? set-top-boxes ? industrial systems ? telecom systems general description the G5010 is dual n-channel mosfet power switch designed for high-sideload-switching applications, and the device has a typical r ds(on) of 10m and the output current is limited to 6a. each switch is independently controlled by an on/off input (en1, en2), which is ca- pable of interfacing directly with low-voltage gpio control signals. in the G5010, a 320 on-chip load resistor is added for quick output discharge (qod) when the switch is turned off. the rise time of the device is internally con- trolled in order to avoid in-rush current and can be adjusted using a ceramic capacitor on the ctx pins. the G5010 is available in 10 pin aqfn package. ordering information order number marking temp. range package (green) G5010ac1u 5010 -40 c to 85 c aqfn2x2-10 note: ac: aqfn2x2-10 1: bonding code u: tape & reel pin configuration typical application circuit * aqfn2x2-10 flip-chip package thermal guide: 1) all of leads can help power dissipation. 2) keep all of pcb trace(near leads) width as wide as possible. please refer to pcb layout considerations for example. 1 2 3 6 5 4 7 8 9 10 ct2 out2 in2 in1 out1 ct1 G5010 aqfn2x2-10 en1 gnd vbias en2 1 2 3 6 5 4 7 8 9 10 ct2 out2 in2 in1 out1 ct1 G5010 aqfn2x2-10 en1 gnd vbias en2 control vbias out1 in1 en1 gnd ct1 charge pump ct2 en2 out2 in2 driver driver 10uf vin2 10uf vin1 1uf
|