intellifet is a registered trademark of diodes incorporated. ZXMS6001N3Q document number: ds33603 rev. 1 - 2 1 of 10 www.diodes.com april 2014 ? diodes incorporated ZXMS6001N3Q advance information 60v n-channel self protected enhancement mode intellifet ? mosfet product summary ? continuous drain source voltage v ds = 60v ? on-state resistance 675m ? ? max nominal load current (v in = 5v) 1.1a ? min nominal load current (v in = 5v) 0.7a ? clamping energy 550mj description low input current self-protected low side mosfet intended for v in =5v applications. monolithic over te mperature, over current, over voltage (active clamp) and esd protected logic level functionality. intended as a general purpose switch. applications ? especially suited for loads with a high in-rush current such as lamps and motors ? all types of resistive, inductive and capacitive loads in switching applications ? c compatible power switch for 12v and 24v dc applications ? automotive rated ? replaces electromechanical relays and discrete circuits ? linear mode capability - the curren t-limiting protection circuitry is designed to de-activate at low v ds to minimise on state power dissipation. the maximum dc operating current is therefore determined by the thermal capability of the package/board combination, rather than by the pr otection circuitry. this does not compromise the product?s ability to self-protect at low v ds . features and benefits ? low input current ? short circuit protection with auto restart ? over voltage protection (active clamp) ? thermal shutdown with auto restart ? over-current protection ? input protection (esd) ? load dump protection (actively protects load) ? qualified to aec-q101 standards for high reliability ? ppap capable ? lead-free finish; rohs compliant (note 1 & 2) ? halogen and antimony free. ?green? device (note 3) mechanical data ? case: sot-223 ? case material: molded plasti c, ?green? molding compound ? ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: matte tin finish ? weight: 0.112 grams (approximate) note: the tab is connected to the source pin and must be electric ally isolated from the drain pin. connection of significant c opper to the drain pin is recommended for best thermal performance. ordering information product marking reel size (inches) tape width (mm) quantity per reel ZXMS6001N3Qta zxms6001 7 12 1,000 units notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- a nd antimony-free, "green" and lead-free. 3. halogen- and antimony-free "green? products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4. automotive products are aec-q101 qualified and are ppap capabl e. automotive, aec-q101 and standard products are electrically and thermally the same, except where specified. for more information, please refer to http://www.diodes.com/quality/product_compliance_de finitions/. 5. for packaging details, go to our website at http://www.diodes.com/p roducts/packages.html. top view sot-223 top view pin out
intellifet is a registered trademark of diodes incorporated. ZXMS6001N3Q document number: ds33603 rev. 1 - 2 2 of 10 www.diodes.com april 2014 ? diodes incorporated ZXMS6001N3Q advance information marking information functional block diagram zxms 6001 zxms6001 = product type marking code
intellifet is a registered trademark of diodes incorporated. ZXMS6001N3Q document number: ds33603 rev. 1 - 2 3 of 10 www.diodes.com april 2014 ? diodes incorporated ZXMS6001N3Q advance information absolute maximum ratings (@t amb = +25c, unless otherwise stated.) characteristic symbol value units continuous drain-source voltage v ds 60 v drain-source voltage for short circuit protection v in = 5v v ds(sc) 36 v continuous input voltage v in -0.2 to +10 v peak input voltage v in -0.2 to +20 v continuous input current -0.2v v in 10v v in < -0.2v or v in > 10v i in no limit i in 2 ma operating temperature range t j -40 to +150 ? c storage temperature range t stg -55 to +150 ? c power dissipation at t amb = +25c (note 6) p d 1.5 w power dissipation at t amb = +25c (note 8) p d 0.6 w continuous drain current @ v in = 5v; t amb = +25c (note 6) i d 1.1 a continuous drain current @ v in = 5v; t amb = +25c (note 8) i d 0.7 a continuous source current (body diode) (note 6) i s 2.0 a pulsed source current (body diode) (note 7) i s 3.3 a unclamped single pulse inductive energy e as 550 mj load dump protection v loaddump 80 v electrostatic discharge (human body model) v esd 4000 v din humidity category, din 40 040 ? e ? iec climatic category, din iec 68-1 ? 40/150/56 ? thermal resistance characteristic symbol value units junction to ambient (note 6) r ja 83 ? c/w junction to ambient (note 7) r ja 45 ? c/w junction to ambient (note 8) r ja 208 ? c/w recommended operating conditions the zxms6001q is optimized for use with c operating from 5v supplies. characteristic symbol min max unit input voltage range v in 0 6 v ambient temperature range t a -40 +125 c high level input voltage for mosfet(note 9) v ih 4 6 v peripheral supply voltage (voltage to which load is referred) v p ? 60 v notes: 6. for a device surfac e mounted on 25mm x 25mm x 1.6mm fr4 board with a high coverage of single sided 2oz weight copper . allocation of 6cm2 copper 33% to source tab and 66% to drain pin with source tab and drain pin electrically isolated. 7. for a device surface mounted on fr4 board as (a) and measured at t<=10s. 8. for a device surface mounted on fr4 board with the minimum copper required for electrical connections. 9. recommended input voltage range over which protection circuits function as specified.
intellifet is a registered trademark of diodes incorporated. ZXMS6001N3Q document number: ds33603 rev. 1 - 2 4 of 10 www.diodes.com april 2014 ? diodes incorporated ZXMS6001N3Q advance information electrical characteristics (@t amb = +25c, unless otherwise stated.) characteristic symbol min typ max unit conditions static characteristics drain-source clamp voltage v ds(az) 60 70 75 v i d = 10ma off state drain current i dss ? 0.1 3 a v ds = 12v, v in = 0v off state drain current i dss ? 3 15 a v ds = 32v, v in = 0v input threshold voltage (note 9) v in(th) 1 1.8 2.5 v v ds = v gs , i d = 10ma input current i in ? 150 ? a v in = +3v input current i in ? 335 500 a v in = +5v, all circumstances static drain-source on-state resistance r ds(on) ? 1 2 ? v in = 3v, i d = 0.1a static drain-source on-state resistance r ds(on) ? 520 675 m ? v in = 5v, i d = 0.7a current limit (note 10) i d(lim) 1 1.8 3 a v in = 5v, v ds > 5v dynamic characteristics turn-on time (v in to 90% i d ) t on ? 27 40 s r l = 22ohm, v in = 0 to 5v, v dd = 12v turn-off time (v in to 90% i d ) t off ? 26 40 s r l = 22ohm, v in = 5v to 0v, v dd = 12v slew rate on (70 to 50% v dd ) -dv ds /dt on ? 1.4 10 v/ s r l = 22ohm, v in = 0 to 5v, v dd =12v slew rate off (50 to 70% v dd ) dv ds /dt on ? 1.2 10 v/ s r l = 22ohm, v in = 5v to 0v, v dd = 12v protection functions (note 11) maximum input voltage for over temperature protection v prot 4 3.5 ? v ttrip > +150c maximum input voltage for over temperature protection v prot ? 7 6 v ttrip > +150c thermal overload trip temperature t jt 150 175 ? ? c ? thermal hysteresis ? ? 8 ? ? c ? unclamped single pulse inductive energy t j = +25c e as 550 ? ? mj i d(iso) = 0.7a, v dd = 32v unclamped single pulse inductive energy t j = +150c e as 200 ? ? mj i d(iso) = 0.7a, v dd = 32v inverse diode source drain voltage v sd ? ? 1 v v in = 0v, -i d = 1.4a notes: 10. the drain current is limited to a reduced value when v ds exceeds a safe level. 11. integrated protection functions are desi gned to prevent ic destruction under faul t conditions described in the datasheet. fault conditions are considered as "outside" normal operating range. protection function s are not designed for continuous, repetitive operation.
intellifet is a registered trademark of diodes incorporated. ZXMS6001N3Q document number: ds33603 rev. 1 - 2 5 of 10 www.diodes.com april 2014 ? diodes incorporated ZXMS6001N3Q advance information application information the current-limit protection circuitry is designed to de-activate at low v ds to prevent the load current from being unnecessarily restricted during normal operation. the design max dc operating current is ther efore determined by the thermal capability of the package/board co mbination, rather than by the protection circuitry (s ee graph 'typical output characteristic'). th is does not compromise the products abil ity to self protect at low v ds . the overtemperature protection circuit trip s at a minimum of 150c. so the availabl e package dissipation reduces as the maximum required ambient temperature increases. this leads to the fo llowing maximum recommended continuous operating currents. minimum copper area characteristics for minimum copper condition as described in note 8 max ambient temperature t a maximum continuous current v in = 5v 25c at v in =5v 720 70c at v in =5v 575 85c at v in =5v 520 125c at v in =5v 320
intellifet is a registered trademark of diodes incorporated. ZXMS6001N3Q document number: ds33603 rev. 1 - 2 6 of 10 www.diodes.com april 2014 ? diodes incorporated ZXMS6001N3Q advance information
intellifet is a registered trademark of diodes incorporated. ZXMS6001N3Q document number: ds33603 rev. 1 - 2 7 of 10 www.diodes.com april 2014 ? diodes incorporated ZXMS6001N3Q advance information large copper area characteristics for large copper area as described in note 6 max ambient temperature t a maximum continuous current v in = 5v 25 c at v in = 5v 1140 70 c at v in = 5v 915 85 c at v in = 5v 825 125 c at v in = 5v 510
intellifet is a registered trademark of diodes incorporated. ZXMS6001N3Q document number: ds33603 rev. 1 - 2 8 of 10 www.diodes.com april 2014 ? diodes incorporated ZXMS6001N3Q advance information
intellifet is a registered trademark of diodes incorporated. ZXMS6001N3Q document number: ds33603 rev. 1 - 2 9 of 10 www.diodes.com april 2014 ? diodes incorporated ZXMS6001N3Q advance information package outline dimensions please see ap02002 at http://www.diodes.com /datasheets/ap02002.pdf for latest version. note: controlling dimensions are in millimeters. approximate dimensions are provided in inches. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. a1 a 7 7 d b e e1 b1 c e1 l 0 - 1 0 q e 0.25 seating plane gauge plane sot223 dim min max typ a 1.55 1.65 1.60 a1 0.010 0.15 0.05 b 0.60 0.80 0.70 b1 2.90 3.10 3.00 c 0.20 0.30 0.25 d 6.45 6.55 6.50 e 3.45 3.55 3.50 e1 6.90 7.10 7.00 e - - 4.60 e1 - - 2.30 l 0.85 1.05 0.95 q 0.84 0.94 0.89 all dimensions in mm dimensions value (in mm) x1 3.3 x2 1.2 y1 1.6 y2 1.6 c1 6.4 c2 2.3 x2 c1 c2 x1 y2 y1
intellifet is a registered trademark of diodes incorporated. ZXMS6001N3Q document number: ds33603 rev. 1 - 2 10 of 10 www.diodes.com april 2014 ? diodes incorporated ZXMS6001N3Q advance information important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical com ponents in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2014, diodes incorporated www.diodes.com
|
