interactive catalog - honeywell sensing and control representative photograph, actual product appearance may vary. dimensions circuit block diagram application interface application drawing installation instructions specifications click here for a print friendly version of this datasheet. SR16C-J6 sr16 series cost effective digital vane sensor; hall-effect technology; twin tower configuration; sinking output; 3.8 to 30 vdc supply voltage features l compact, robust packages l mechanically interchangeable with our standard optical style sensors l operated by a ?ferrous vane? interrupter for pulse counting or position sensing l current sinking (open collector) output l 3.8 vdc to 30 vdc power supply l medium level magnetic switching to reduce stray field interference l internally sealed packages for moderate environment applications l no mechanical contacts; eliminates product wear l noncontact position sensing description the sr16 series hall effect vane sensors are designed for position and speed sensing and are available in three termination variations. the cost effective sr16 series sensors are tailored for fitness and information technology applications. they are well suited for use in moderate electrical, chemical, and mechanical environments. the sr16 series sensors contain an internal magnet and hall effect sensor mounted in a twin tower configuration. in application, a customer supplied ferrous target passes between the tower gap, interrupts the magnetic field, and switches the digital state of the sensor. these robust solid state hall effect sensors are housed in an environmentally sealed plastic package. the hall effect sensors provide highly accurate and repeatable performance in environments in which dirt, dust, or stray ir light might affect the performance of optical solutions. the sensor package is constructed of rugged polyphthalamide material and is mechanically interchangeable with our standard optical sensors. product specifications product type competitively priced hall digital vane sensor package style dual tower wire exit supply voltage 3.8 vdc to 30.0 vdc output type sink termination type 26-gauge 7-strand lead wire operating temperature range -20 c to 85 c [-4 f to 185 f] output voltage 0.4 vdc max. vibration 10 g/10 hz to 500 hz humidity 95 %rh/40 c 100 h vane and geartooth target material low carbon steel, high permeability, low residual induction http://catalog.sensing.honeywell.com/datasheet.asp?pn=SR16C-J6&fam=solidstate (2 of 3)17/11/2005 11:44:23
interactive catalog - honeywell sensing and control sealing sealed ss4 package availability global comment for minimum tooth measurement, reference recommended target on drawing. supply current (max. @ 25 c) 10 ma output current (max.) 40 ma vane thickness 1,14 mm [0.045 in] minimum tooth depth 6,35 mm [0.250 in] series name sr16 series due to regional agency approval requirements, some products may not be available in your area. please contact your regional honeywell office regarding your product of choice. http://catalog.sensing.honeywell.com/datasheet.asp?pn=SR16C-J6&fam=solidstate (3 of 3)17/11/2005 11:44:23
solid state sensors sr16/17 hall effect vane sensors sr 16/17 series sensing and control features ? = compact, robust packages ? = mechanically interchangeable with our standard optical style sensors ? = operated by a ?ferrous vane? interrupter for pulse counting or position sensing ? = current sinking (open collector) output ? = 3.8 to 30 vdc power supply ? = medium level magnetic switching to reduce stray field interference ? = internally sealed packages for moderate environment applications ? = no mechanical contacts; eliminates product wear ? = noncontact position sensing warning personal injury ? = do not use these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. failure to comply with these instructions could result in death or serious injury. the sr16/17 series hall effect vane sensors, designed for position and speed sensing, offer side mount packages and three termination variations. the cost effective sr16/17 series sensors are tailored for fitness and information technology applications. they are well suited for use in moderate electrical, chemical, and mechanical environments. the sr16/17 series sensors contain an internal magnet and hall effect sensor mounted in a twin tower configuration. in application, a customer supplied ferrous target passes between the tower gap, interrupts the magnetic field, and switches the digital state of the sensor. these robust solid state hall effect sensors are housed in an environmentally sealed plastic package. the hall effect sensors provide highly accurate and repeatable performance in environments in which dirt, dust, or stray ir light might affect the performance of optical solutions. the sensor package is constructed of rugged polyphthalamide and polycarbonate material and is mechanically interchangeable with our standard optical sensors. warning misuse of documentation ? = the information presented in this product sheet is for reference only. do not use this document as product installation information. ? = complete installation, operation, and maintenance information is provided in the instructions supplied with each product. failure to comply with these instructions could result in death or serious injury.
solid state sensors sr16/17 hall effect vane sensors sr16/17 series 2 honeywell ? sensing and control for application help: call 1-800-537-6945 electrical characteristics ?20 c to 85 c, 3.8 to 30 vdc min. max. remarks supply voltage 3.8 to 30 vdc current consumption ? 9 ma (off) 10 ma (on) output voltage (operated) ? 0.40 v sinking 20 ma max. sink current (operated) ? 20 ma output leakage current (released) ? 10 a v out = 30 vdc, v cc = 24 vdc output switching time rise, 10 to 90% ? 1.5 s v cc = 12 v, r l = 1.6 k ? , c l = 20 pf fall, 90 to 10% ? 1.5 s v cc = 12 v, r l = 1.6 k ? , c l = 20 pf operating temperature -20 c to +85 c (-4 f to +185 f) mechanical characteristics operating range 12 vdc @ 25 ? c operate release 1.5 2.0 ? 3.0 2.5 ? conditions target engagement distance 0.150 in to 0.300 in rpms 0 to 5000 slot depth 0.250 in min. block circuit wiring diagram speed sensing interface ground (-) output (o) n. h. vs (+) trigger circuit and amplifier hall sensor high impedance input vcc +5 10 k ohm 100 pf capacitor 100 ohm input green(o) 100 ohm vcc red (+) ground black ( ) vcc mounting dimensions (for reference only) mm/in sr16/17 series vane sensors sr16c-j4
solid state sensors sr16/17 hall effect vane sensors sr16/17 serie s for application help: call 1-800-537-6945 honeywell ? sensing and control 3 mounting dimensions (for reference only) mm/in sr16/17 series vane sensors SR16C-J6 sr16c-n sr17c-j6 notes: 1. mounting specification: non-ferrous #4 machine head screws with .25 od washers torqued to 3-5 in-lbs. 2. suggested target configuration, material: .045 low carbon steel, high permeability, low residual induction. 3. operate (degrees) is the angular distance from the leading edge of the tooth to the centerline of the sensor. 4. release (degrees) is the angular distance from the trailing edge of the tooth to the centerline of the sensor. 5. operating specification is based on target shown.
solid state sensors sr16/17 hall effect vane sensors sr16/17 series sensing and control honeywell 11 west spring street freeport, illinois 61032 printed with soy ink on 50% recycled paper 005844-1-en il50 glo 0300 printed in usa www. honeywell.com/sensing warranty/remedy honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. contact your local sales office for warranty information. if warranted goods are returned to honeywell during the period of coverage, honeywell will repair or replace without charge those items it finds defective. the foregoing is buyer?s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. specifications may change without notice. the information we supply is believed to be accurate and reliable as of this printing. however, we assume no responsibility for its use. while we provide application assistance personally, through our literature and the honeywell web site, it is up to the customer to determine the suitability of the product in the application. for application assistance, current specifications, or name of the nearest authorized distributor, contact a nearby sales office. or call: 1-800-537-6945 usa 1-800-737-3360 canada 1-815-235-6847 international fax 1-815-235-6545 usa internet www.honeywell.com/sensing info.sc@honeywell.com
http://catalog.sensing.honeywell.com/author/images/honeywell/ss/sr16-j6-dim.gif http://catalog.sensing.honeywell.com/author/images/honeywell/ss/sr16-j6-dim.gif17/11/2005 11:45:20
|
