features description center frequency 6000 mhz passband 4000 - 8000 mhz insertion loss 3.0 db @ 25c 3.5 db -40c to +85c vswr 1.5:1 4000 mhz to 8000 mhz* rejection 40 db dc to 3000 mhz 40 db 9500 mhz to 12000 mhz usable temp range -55 to +125 degree c *50 ohm system mechanical footprint lxw 0.450 x 0.230 inch inch [11.43 x 5.84] mm height 0.1 [2.54] inch [mm] frequency response catalog specifications subject to change without notice ro4350b is a product of rogers corporation 4 to 8 ghz bandpass filter ? fully shielded component ? frequency stable over temperature ? small size afl05181 electrical specifications -75 -70 -65 -60 -55 -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000 14000 15000 16000 17000 18000 magnitude in db frequency in mhz typical performance magnitude in db surface mount, fully shielded, thin film filter designed for use on pcb 8 - 12 mils thick with permitivity of 3.0 - 3.8. applications include c - band, satellite communications, satellite tv, weather and 1of3 afl05181 may 2013 revision a
-75 -65 -55 -45 -35 -25 -15 -5 5 3000 4000 5000 6000 7000 8000 9000 magnitude in db frequency in mhz narrow band performance -5 -4.5 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 3600 4600 5600 6600 7600 8600 magnitude in db frequency (mhz) passband response -40 -35 -30 -25 -20 -15 -10 -5 0 3000 4000 5000 6000 7000 8000 9000 magnitude in db frequency (mhz) return loss -75 -65 -55 -45 -35 -25 -15 -5 5 2000 7000 12000 17000 magnitude in db frequency (mhz) wide band performance 2of3 afl05181 may 2013 revision a
all measurements inches mounting information mechanical drawing dielectric laboratories, inc. 2777 route 20 east, cazenovia, ny 13035 usa phone: (315) 655 - 8710 fax: (315)655 - 0445 email: sales@dilabs.com pcb ground pattern length and width can be 0.002 - 0.003 inches larger than filter footprint. dimensions of filter launch and pcb launch pattern should be closely matched. it is suggested that pcb ground metal be pulled back from rf i/o trace to account for component alignment tolerance. ground via depth and spacing should be set so as not to create any resonances at the frequency of operation. reference smt filter mounting application note for additional mounting information. 3of3 afl05181 may 2013 revision a
|
