revised 7/24/2014 www.phihong.com 60w dimmable constant current led driver pda060w waterproof led driver with 0-10v dimming features ? ip67 rating - waterproof ? class 2 per ul1310 (except 700ma model) ? ovp, ocp, over-load and short-circuit protection ? thd <20% ? ul 8750 compliant ? >0.9 power factor correction ? 0-10v and resistive dimming ? brownout/brownout recovery ? 90 to 305vac input voltage range applications ? down lights ? area lights ? architectural lighting safety approvals (pending) ? cul/ul mechanical characteristics ? length: 162.5mm (6.39in) ? height: 32mm (1.26in) ? width: 43mm (1.69in) ? weight: n/a output specifications phihong is not responsible for any error, a nd reserves the right to make changes wit hout notice. please visit our website at www.phihong.com for the most up-to-date spec ifications and cont act information. model dc output voltage output current output power min. typ. max. PDA060W-700B 60v - 86v 700ma 60w pda060w-1a0b 39v - 56v 1070ma 60w pda060w-1a4b 30v - 43v 1400ma 60w pda060w-1a6b 26v - 38v 1600ma 60w pda060w-2a0b 21v - 30v 2000ma 60w
pda060w specifications www.phihong.com input: ac input voltage range 90vac to 305vac ac input voltage rating 120vac to 277vac ac input frequency 47~63hz maximum input current 0.9a leakage current 250 a maximum power factor 0.9 thd less than 20% output: efficiency model typical efficiency PDA060W-700B 91% pda060w-1a0b 91% pda060w-1a4b 91% pda060w-1a6b 91% pda060w-2a0b 91% dimming function: resistance or 0-10vdc dimming (see characteristics below) resistor must be placed betwee n dim+ and dim- for operation. see following page for dimming table. environmental: temperature operation -40 to +50c non-operation -40 to +80c operating humidity 20 to 95% emc fcc 47 part 18 class b immunity iec61000-4-2 iec61000-4-4 iec61000-4-5 iec61000-4-11 dielectric withstand (hi-pot) test primary to secondary: 3000vac for 1 minute, 10ma insulation resistance primary to secondary: >10m ohm 500vdc, 1 minute features: short-circuit protection the psu will withstand a short circuit across the outputs without damage input over current protection the input power line will be fused with a 2a/300v fuse output over-voltage protection auto shutdown input / output connections position terminal color specification input black awg16 solid wire white awg16 solid wire output red awg18 solid wire blue awg18 solid wire dim+ purple awg20 solid wire dim- grey awg20 solid wire warranty 5 years
dimming characteristics resistive dimming functions resistance value 10k ? 20k ? 30k ? 40k ? 50k ? 60k ? 70k ? 80k ? 90k ? 100k ? open output current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95-108% pda060w dimension diagram unit:mm www.phihong.com
power factor vs. load total harmonic distortion vs. load lifetime vs. tc efficiency vs. load (PDA060W-700B) temperature rating static characteristic: load vs. input voltage derating curve: load vs. ta typical characteristics www.phihong.com
|