View B39851B8581P810_8584017.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer lte band 20 series/type: ordering code: b8581 B39851B8581P810 date: version: november 15, 2012 1.3 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 november 15, 2012 b8581 847.0 / 806.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer preliminary data revision history changes compared to previously issued iteration issue originator detailed specification changes date 1.0 g. bourjade preliminary data sheet, datas from ai73a sept, 3 rd 2012 1.1 g. bourjade ordering code, references oct, 11 th 2012 1.3 g. bourjade esd, hbm, tx rejection, rx vswr and coil nov, 15 th 2012
3 november 15, 2012 b8581 847.0 / 806.0 mhz saw components saw duplexer preliminary data please read cautions and warnings and important notes at the end of this document. application n low-loss saw duplexer for lte band 20 systems n very high isolation n usable passband 30 mhz n single-ended to balanced transformation in anten- na-rx path n impedance transformation 50 w to 100 w in anten- na-rx path n very small size and low height features n package size 1.8 * 1.4 * 0.5 mm 3 n rohs compatible n package for s urface m ount t echnology ( smt ) n ni, au-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitivity l evel 3 bottom view top view side view 0.3 4 0.35 0.25 0.25 8 4 8 1.4 1.8 123 6 5 75 6 123 7 0.5 max. 0.7 pin configuration n 1 tx input n 3, 4 rx output (balanced) n 6 antenna n 2, 5, 7, 8 to be grounded
4 november 15, 2012 b8581 847.0 / 806.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer preliminary data characteristics temperature range for specification: t = -15 ?c to +85 ?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w || 9.5 nh rx teminating impedance: z rx = 100 w (balanced) || 47 nh development status 1) 1) values in columns min., typ. and max. indicate the development status of the current version. characteristics tx-antenna min. typ. @ 25 ?c max. center frequency f c 847.0 mhz maximum insertion attenuation a 832.0 ... 862.0 mhz - 2.2 2.8 db 832.0 ... 862.0 mhz - 2.2 2.5 2) 2) in +25,+55 ? c temperature range db amplitude ripple (p-p) da 832.0 ... 862.0 mhz - 1.0 1.9 db input vswr (tx port) 832.0 ... 862.0 mhz - 1.7 2.0 output vswr (ant port) 832.0 ... 862.0 mhz - 1.7 2.0 absolute attenuation a 10.0 ... 771.0 mhz 30 35 - db 771.0 ... 791.0 mhz 35 40 - db 791.0 ... 821.0 mhz 44 48 - db 873.0 ... 903.0 mhz 15 30 - db 925.0 ... 960.0 mhz 30 37 - db 1565.0 ... 1606.0 mhz 35 40 - db 1664.0 ... 2170.0 mhz 35 41 - db 2400.0 ... 2620.0 mhz 35 38 - db 2620.0 ... 2690.0 mhz 35 45 - db 3328.0 ... 3448.0 mhz 35 40 - db 4000.0 ... 6000.0 mhz 20 16 - db
5 november 15, 2012 b8581 847.0 / 806.0 mhz saw components saw duplexer preliminary data please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = -15 ?c to +85 ?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w || 9.5 nh rx teminating impedance: z rx = 100 w (balanced) || 47 nh development status 1) 1) values in columns min., typ. and max. indicate the development status of the current version. characteristics antenna-rx min. typ. @ 25 ?c max. center frequency f c 806.0 mhz maximum insertion attenuation a 791.0 ... 821.0 mhz - 2.4 3.5 db 791.0 ... 821.0 mhz - 2.4 3.0 2) 2) in +25,+55 ? c temperature range db amplitude ripple (p-p) da 791.0 ... 821.0 mhz - 1.2 2.7 db input vswr (ant port) 791.0 ... 821.0 mhz - 1.6 2.0 output vswr (rx port) 791.0 ... 821.0 mhz - 1.8 2.2 common mode rejection ratio 791.0 ... 821.0 mhz 25 30 - db absolute attenuation a 10.0 ... 770.0 mhz 45 55 - db 770.0 ... 782.0 mhz 15 45 - db 832.0 ... 833.5 mhz 35 60 - db 833.5 ... 862.0 mhz 50 54 - db 873.0 ... 903.0 mhz 40 53 - db 1623.0 ... 1683.0 mhz 45 55 - db 2400.0 ... 2545.0 mhz 45 51 - db 2545.0 ... 4000.0 mhz 45 54 - db 4000.0 ... 6000.0 mhz 30 35 - db absolute mean attenuation a mean 782.0 ... 790.0 mhz 4 8 - db 782.0 ... 790.0 mhz 6 3) 8 - db
6 november 15, 2012 b8581 847.0 / 806.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer preliminary data characteristics temperature range for specification: t = -15 ?c to +85 ?c tx terminating impedance: z tx =50 w ant terminating impedance: z ant =50 w || 9.5 nh rx teminating impedance: z rx = 100 w (balanced) || 47 nh maximum ratings matching network (element values depend on pcb layout) lp1=9.5nh, lp2 =47nh development status 1) 1) values in columns min., typ. and max. indicate the development status of the current version. characteristics tx-rx min. typ. @ 25 ?c max. differential mode isolation a 791.0 ... 821.0 mhz 45 48 - db 832.0 ... 834.0 mhz 40 60 - db 834.0 ... 862.0 mhz 54 57 - db 1574.0 ... 1577.0 mhz 40 64 - db 1664.0 ... 1724.0 mhz 20 63 - db 2496.0 ... 2586.0 mhz 20 58 - db common mode isolation a 832.0 ... 862.0 mhz 60 65 - db storage temperature range t stg C40/+85 ?c dc voltage v dc tbd v esd voltage, tx, ant port v esd 300 v hb model esd voltage v esd >500 v cd model input power at tx port 832.0 ...862.0 mhz p in tbd dbm continuous wave elsewhere p in 10 dbm 55 ?c, 50000h } lp2 lp1
7 november 15, 2012 b8581 847.0 / 806.0 mhz saw components saw duplexer preliminary data please read cautions and warnings and important notes at the end of this document. frequency response tx-ant frequency response tx-ant
8 november 15, 2012 b8581 847.0 / 806.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer preliminary data frequency response ant-rx frequency response ant-rx
9 november 15, 2012 b8581 847.0 / 806.0 mhz saw components saw duplexer preliminary data please read cautions and warnings and important notes at the end of this document. frequency response tx-rx (isolation) frequency response common mode isolation
10 november 15, 2012 b8581 847.0 / 806.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer preliminary data s11 vswr (tx) s22 vswr (ant) s33 vswr (rx)
11 november 15, 2012 b8581 847.0 / 806.0 mhz saw components saw duplexer preliminary data please read cautions and warnings and important notes at the end of this document. references type b8581 ordering code B39851B8581P810 marking and package c61157-a8-a69 packaging f61074-v8259-z000 date codes l_1126 s-parameters b8581_nb_un.s4p, b8581_wb_un.s4p see file header for port/pin assignment table. soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2012. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
12 november 15, 2012 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39851B8581P810

	To Download B39851B8581P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .