t verify the above model numbers when placing orders. pressure transducers compact and light weight for non-corrosive gases dual in line package pressure range ~9.81, ~981 kpa {~0.1, ~10 kgf/cm 2 } features part name material housing lcp (liquid crystal polymer) aluminum silicone ceramic phosphor bronze + au-plated cover sensor chip chip resistor (compensatory resistor) terminal pin 1 2 3 4 5 internal structure (bn type) model number designation series name rated pressure range 101 0 ~ 9.81 kpa {0 ~ 0.1 kgf/cm 2 } 501 0 ~ 49.0 kpa {0 ~ 0.5 kgf/cm 2 } 102 0 ~ 98.1 kpa {0 ~ 1 kgf/cm 2 } 352 0 ~ 343 kpa {0 ~ 3.5 kgf/cm 2 } 502 0 ~ 490 kpa {0 ~ 5 kgf/cm 2 } 702 0 ~ 686 kpa {0 ~ 7 kgf/cm 2 } 103 0 ~ 981 kpa {0 ~ 10 kgf/cm 2 } terminal direction an same direction as the pressure port bn opposite direction to the pressure port thermal error 15 0.15 % ( 0.12 %) f.s./c pressure reference g gauge list of model numbers terminal direction rated pressure range kpa {kgf/cm 2 } an bn 0 ~ 9.81 0 ~ 49.0 0 ~ 98.1 0 ~ 343 0 ~ 490 0 ~ 686 0 ~ 981 {0 ~ 0.1} {0 ~ 0.5} {0 ~ 1} {0 ~ 3.5} {0 ~ 5} {0 ~ 7} {0 ~ 10} a P-2000-101G-15-AN a p-2000-501g-15-an a p-2000-102g-15-an a p-2000-352g-15-an a p-2000-502g-15-an a p-2000-702g-15-an a p-2000-103g-15-an p-2000-101g-15-bn p-2000-501g-15-bn p-2000-102g-15-bn p-2000-352g-15-bn p-2000-502g-15-bn p-2000-702g-15-bn p-2000-103g-15-bn the an version, marked a is manufactured upon receipt of order basis. p-2000 2 3 5 4 1 p-2000 - 501 g - 15 - bn
p-2000 pressure transducers standard specifications environmental characteristics item pressure reference rated pressure range maximum pressure break-down pressure operating temp. range compensated temp. range storage temp. operating humidity thermal error (reference temp.: 25 c) excitation current offset voltage span voltage bridge resistance linearity/hysteresis pressure medium insulation resistance dielectric strength pressure port response net weight model number p-2000 101g 501g 102g 352g 502g 702g 103g gauge 9.81 49.0 98.1 343 490 686 981 {0.1} {0.5} {1.0} {3.5} {5} {7} {10.0} 19.6 98.1 196 686 981 1373 1471 {0.2} {1.0} {2.0} {7.0} {10} {14} {15.0} 49.0 245 490 1030 1471 1961 1961 {0.5} {2.5} {5} {10.5} {15} {20} {20} non-corrosive gases approx. 1 20 15 50 20 90 30 approx. 1 3300 30 % 1.5 constant current 100 (500 v dc) 500 v ac, 60 s leakage current 1 ma maximum 3.2 0 ~ 50 35 ~ 85 no condensation ? 20 ~ 80 atmospheric pressure, humidity 65 %rh maximum ? 20 ~ 80 0.3 0.15 0.12 0.05 0.04 kpa {kgf/cm 2 } kpa {kgf/cm 2 } kpa {kgf/cm 2 } c c %rh c zero %f.s./c %f.s. span %f.s./c ma dc mv mv m minimum mm ms g general specifications analog output power t p-2000 series can be operated at the vacuum pressure. test item test conditions (at 25 5 c) permissible change vibration 10 ~ 500 hz, 1.5 mm maximum/98.1 m/s 2 , 3 directions for 2 hours each 981 m/s 2 , 3 directions for 3 times each 0 ~ rated pressure, 10 6 cycles 40 c, 90 ~ 95 %rh, 240 hrs. offset voltage/span voltage: 1 %f.s. maximum each shock pressure cycling moisture resistance ? unless otherwise specified, the specs are defined at an ambient temperature of 255 c and excitation current of 1.5 ma dc.
p-2000 pressure transducers internal electrical schematics terminal number outline dimensions unless otherwise specified, tolerance : 0.3 (unit: mm) bn type an type pin connection 1 output c 2 input b 3 input c 4 output b 5 input c 6 input b 12 10 12 3 4 5 6 pressure port r1 7.3 5.2 30.5 2.5 2.5 0.5(t = 0.3) pressure transducer p-2000 g copal japan vent hole pressure range marking 3.2 +0.1 0 1.2 12 10 12 3 4 5 6 7.3 5.2 2.5 2.5 0.5(t = 0.3) pressure transducer p-2000 g copal japan vent hole pressure range marking 3.2 +0.1 0 3.50.5 pressure port 1.2 3 5 4 1 2 6 r (+) (+) (C) (C) r : built-in chip resistor for temp. compensation output input
|