t please refer to the list of model numbers when placing orders. pressure gauges pg-200/pg-208 model number designation p g - 2 0 0 - 1 0 2 g p - 3 - p series name rated pressure range 101 0 ~ 9.81 kpa {0 ~ 0.1 kgf/cm 2 } 0 ~ 10 kpa when displayed in the unit of pa 102 0 ~ 98.1 kpa {0 ~ 1 kgf/cm 2 } 0 ~ 100 kpa when displayed in the unit of pa 103 0 ~ 981 kpa {0 ~ 10 kgf/cm 2 } 0 ~ 1 mpa when displayed in the unit of pa pressure reference g gauge vh gauge (vacuum) ah absolute gp gauge pa unit display gmp gauge (103 type only) pa unit display vp gauge (vacuum) pa unit display ap absolute pa unit display power blank battery 3 external power (analog output is available) installation p panel type y except for pg-208 s stand type pg-200, pg-208 excellent stability a semiconductor chip is used as pressure a sensing element. state of the art circuit technology guarantees excellent temperature compensation. low power consumption approx. 9000 hours (one year) continuous operation by 3.6 v lithium battery is expected due to the adoption time sharing operation method. easy reading with a large lcd display with pressure switches function two independent pressure setting points of hi and lo with analog output (0 ~ 1 v) meets din sizes w 72 h 72 d 40 mm pg-200 is for non-corrosive gases. pg-208 is corrosion resistant due to the use of stainless steel diaphragm. features (pg-200) (pg-208) lo setting vr for switch output lo hi setting vr for switch output hi span adjustment vr zero adjustment vr digital 3 1/2 digits battery monitor set button for switch output hi or lo power switch digital 3 1/2 digits
pg-200/pg-208 pressure gauges pressure reference pressure medium pressure medium for non-corrosive gases for corrosive gases or liquids gauge absolute 0 ~ 9.81 0 ~ 98.1 0 ~ 981 0 ~ ? 98.1 0 ~ 98.1 kpa abs {0 ~ 1000 mmh 2 o} {0 ~ 1} {0 ~ 10} {0 ~ - 735 mmhg} {0 ~ 735 mmhg abs} kpa {kgf/cm 2 } rated pressure range pressure reference gauge absolute 0 ~ 10 0 ~ 100 0 ~ 1000 0 ~ ? 100 0 ~ 100 kpa abs rated pressure range unit of display unit of display unit of display panel type stand type battery external power external power external power battery battery mmh 2 o kgf/cm 2 mmhg kpa kpa abs mpa list of model numbers a pa version ? a non si unit version ? a pg-200-101g-p a pg-200-102g-p a pg-200-103g-p a pg-200-102vh-p a pg-200-102ah-p a pg-200-101g-3-p a pg-200-102g-3-p a pg-200-103g-3-p a pg-200-102vh-3-p a pg-200-102ah-3-p a pg-200-101g-s a pg-200-102g-s a pg-200-103g-s a pg-200-102vh-s a pg-200-102ah-s a pg-200-101g-3-s a pg-200-102g-3-s a pg-200-103g-3-s a pg-200-102vh-3-s a pg-200-102ah-3-s a pg-208-102g-s a pg-208-103g-s a pg-208-102vh-s a pg-208-102g-3-s a pg-208-103g-3-s a pg-208-102vh-3-s : not available t verify the above model numbers when placing orders. the products marked a are manufactured upon receipt of order basis. option> dc3.6 v lithium battery order item: lithium battery the battery is an expendable item. the first one is provided with the unit.
for non-corrosive gases for corrosive gases or liquids pressure medium panel type stand type battery external power external power external power battery battery pg-200-101gp-p pg-200-102gp-p pg-200-103gp-p pg-200-102vp-p pg-200-102ap-p pg-200-101gp-3-p pg-200-102gp-3-p pg-200-103gp-3-p PG-200-102VP-3-P pg-200-102ap-3-p pg-200-101gp-s pg-200-102gp-s pg-200-103gp-s pg-200-102vp-s pg-200-102ap-s pg-200-101gp-3-s pg-200-102gp-3-s pg-200-103gp-3-s pg-200-102vp-3-s pg-200-102ap-3-s pg-208-102gp-s pg-208-103gp-s pg-208-102vp-s pg-208-102gp-3-s pg-208-103gp-3-s pg-208-102vp-3-s for non-corrosive gases for corrosive gases or liquids panel type stand type battery external power external power external power battery battery pg-200-103gmp-p pg-200-103gmp-3-p pg-200-103gmp-s pg-200-103gmp-3-s pg-208-103gmp-s pg-208-103gmp-3-s
standard specifications a pa version ? rated pressure range model number resolution display cycle rated display range display accuracy maximum pressure break-dawn pressure pressure medium gravitational effect (from vertical position to horizontal position) pressure reference thermal error operating temp., range c compensated temp. range pressure port item pg-200 pg-208 101gp 102gp 103gp 103gmp 102vp 102ap 102gp 103gp 103gmp 102vp kpa kpa kpa % f.s. panel type stand type span operating humidity storage temp. gauge absolute gauge zero 10 100 1000 ? 100 100 kpa abs 100 1000 ? 100 20 200 1500 200 200 kpa abs 200 2000 200 50 500 2000 500 500 kpa abs 300 3000 300 non-corrosive gases approx. 3 times/s 1 count 0.5 %f.s. 2 counts (at 25 5 c) 0.1 % f.s./c 2 counts 0.05 % f.s./c 2 counts 0.1 % f.s./c 2 counts 0.05 % reading/c 2 counts % $ ? 7z % $ ? 7 (selectable by electrical terminals only in case of stand type) consumption current : 20 ma maximum 3 1/2 lcd 0 ~ 50 0 ~ 50 35 ~ 85 no condensation approx. 0.5 approx. 0.05 approx. 0.5 ? 20 ~ 70 atmospheric pressure, humidity 65 %rh maximum m 5 r 1/4(pt 1/4) g 3/8(pf 3/8) net weight panel type stand type approx. 130 approx. 330 approx. 390 power battery type external power lithium battery dc 3.6 v (er6vm) battery life 9000 h minimum corrosive gases/liquids compatible with sus 316 or sus 316l t maximum maximum kpa no. of digits display element 0.00 ~ 10.00 00.0 ~ 100.0 000 ~ 1000 .000 ~ 1.000 (mpa) 00.0 ~ ? 100.0 00.0 ~ 100.0 00.0 ~ 100.0 000 ~ 1000 .000 ~ 1.000 (mpa) 00.0 ~ ? 100.0 general specifications display t 1 : pressure medium will be limited to the ones compatible with fluoro rubber when an o-ring supplied as an accessary is used and also compatible with the material of the joints. g c %rh c unless otherwise specified, the specs are defined at an ambient temperature of 25 5 c, excitation voltage of 12 v dc and battery of 3.6 v dc. pg-200/pg-208 pressure gauges
pg-200/pg-208 pressure gauges 0.00 ~ 10.00 00.0 ~ 100.0 000 ~ 1000 .000 ~ 1.000 (mpa) 00.0 ~ ? 100.0 00.0 ~ 100.0 00.0 ~ 100.0 000 ~ 1000 .000 ~ 1.000 (mpa) 00.0 ~ ? 100.0 101gp 102gp 103gp 103gmp 102vp 102ap 102gp 103gp 103gmp 102vp switch no. of setting points model number switching capacity switching hysteresis residual voltage output conditions switch state indication response 2 points of hi and lo (one point of hi only for the external power supply version) 7 % $z n " npn open collector 4 counts maximum 7 % $ when current inflow is 40 ma measured press ? lo set press. lo output on, measured press. ? hi set press. hi output on. indicated by an lcd display (hi or lo) when the switch output is on. approx. 100 ms pressure setting range kpa setting method when the set button is pressed, hi set pressure is displayed for about 20 seconds first, then lo set pressure is displayed for about 20 seconds. therefore, high and low pressure settings can be made by vr watching the display. accessories (for panel type only) analog voltage output y t additional function voltage output: 0 ~ 1 v, accuracy: 1 %f.s. (at 25 5 c), load: 1 k minimum low battery indication (lo bat) item pg-200 pg-208 t 2 : available only for external power type. standard specifications a pa version ? attachements : half union (for a tube of 6 0.d.), and barb fitting (for a tube of 4 i.d.), one piece each. (panel type only) unless otherwise specified, the specs are defined at an ambient temperature of 25 5 c, excitation voltage of 12 v dc and battery of 3.6 v dc.
display standard specifications a non si unit version ? rated pressure range model number resolution display cycle rated display range display accuracy maximum pressure break-dawn pressure pressure medium gravitational effect (from vertical position to horizontal position) pressure reference thermal error operating temp., range c compensated temp. range pressure port item pg-200 pg-208 101g 102g 103g 102vh 102ah 102g 103g 102vh kpa {kgf/cm 2 } kpa {kgf/cm 2 } kpa {kgf/cm 2 } % f.s. panel type stand type span operating humidity storage temp. gauge absolute gauge zero 9.81 98.1 981 ? 98.1 98.1 kpa abs 98.1 981 ? 98.1 {1000 mmh 2 o} {1} {10} { ? 735 mmhg} {735 mmhg abs} {1} {10} { ? 735 mmhg} 19.6 196 1471 196 196 kpa abs 196 1961 196 {2000 mmh 2 o} {2} {15} {1471 mmhg} {1471 mmhg abs} {2} {20} {1471 mmhg} 49.0 490 1961 490 490 kpa abs 294 2941 294 {5000 mmh 2 o} {5} {20} {3678 mmhg} {3678 mmhg abs} {3} {30} {2206 mmhg} non-corrosive gases approx. 3 times/s 1 count 0.5 %f.s. 2 counts (at 25 5 c) 0.1 % f.s./c 2 counts 0.05 % f.s./c 2 counts 0.1 % f.s./c 2 counts 0.05 % reading/c 2 counts % $ ? 7z % $ ? 7 (selectable by electrical treminals only in case of stand type) consumption current : 20 ma maximum 3 1/2 lcd 0 ~ 50 0 ~ 50 35 ~ 85 no condensation approx. 0.5 approx. 0.05 approx. 0.5 ? 20 ~ 70 atmospheric pressure, humidity 65 %rh maximum m 5 r 1/4(pt 1/4) g 3/8(pf 3/8) net weight panel type stand type approx. 130 approx. 330 approx. 390 power battery type external power lithium battery dc 3.6 v (er6vm) battery life 9000 h minimum corrosive gases/liquids compatible with sus 316 or sus316l t maximum maximum no. of digits display element 000 ~ 1000 mmh 2 o .000 ~ 1.000 kgf/cm 2 0.00 ~ 10.00 kgf/cm 2 000 ~ ? 735 t 2 mmhg 000 ~ 735 t 2 mmhg .000 ~ 1.000 kgf/cm 2 0.00 ~ 10.00 kgf/cm 2 000 ~ ? 735 t 2 mmhg general specifications t 1 : pressure medium will be limited to the ones compatible with fluoro rubber when an o-ring supplied as an accessary is used and also compatible with the material of the joints. t 2 : measurement can be made up to - 760 mmhg for 102vh and up to 760 mmhg for 102ah (accuracy not guaranteed beyond the rated pressure.). g c %rh c unless otherwise specified, the specs are defined at an ambient temperature of 25 5 c, excitation voltage of 12 v dc and battery of 3.6 v dc. pg-200/pg-208 pressure gauges
pg-200/pg-208 pressure gauges environmental characteristics test item test conditions permissible change pressure indication, switch setting and analog output (zero and span) variation: 1 %f.s. maximum each. (note: no analog output for the battery type.) vibration amplitude 1.5 mm p-p, 10 ~ 55 hz, 3 directions for 2 hours each (packed) 98.1 m/s 2 , 3 directions for 3 times each (packed) 10 6 cycles 0 ~ rated pressure 40 c, 90 ~ 95 %rh, 240 hrs. shock pressure cycling moisture resistance switch no. of setting points model number switching capacity switching hysteresis residual voltage output conditions switch state indication response 2 points of hi and lo (one point of hi only for the external power supply version) 7 % $z n " npn open collector 4 counts maximum 7 % $ when current inflow is 40 ma measured press ? lo set press. lo output on, measured press. ? hi set press. hi output on. indicated by an lcd display (hi or lo) when the switch output is on. approx. 100 ms pressure setting range setting method when the set button is pressed, hi set pressure is displayed for about 20 seconds first, then lo set pressure is displayed for about 20 seconds. therefore, high and low pressure settings can be made by vr watching the display. accessories (for panel type only) attachements : half union (for a tube of 6 0.d.), and barb fitting (for a tube of 4 i.d.), one piece each. (panel type only) analog voltage output y t additional function voltage output: 0 ~ 1 v, accuracy: 1 %f.s. (at 25 5 c), load: 1 k minimum low battery indication (lo bat) item pg-200 pg-208 101g 102g 103g 102vh 102ah 102g 103g 102vh t 3 : pressure setting can be made up to C 760 mmhg for 102vh and up to 760 mmhg for 102ah (accuracy not guaranteed beyond the rated pressure.). t 4 : available only for external power type. 000 ~ 1000 .000 ~ 1.000 0.00 ~ 10.00 .000 ~ 1.000 0.00 ~ 10.00 000 ~ ? 735 t 000 ~ 735 t 000 ~ ? 735 t standard specifications a non si unit version ? unless otherwise specified, the specs are defined at an ambient temperature of 25 5 c, excitation voltage of 12 v dc and battery of 3.6 v dc.
123456 72 72 (40) 13 27 69 15 68 19 m 5 depth 5 unit of display panel cut (1 ? 2.5 mm) panel board thickness 69.5 +0.5 0 68.5 +0.5 0 panel cut dimension lh batt pressure gauge copal electronics pressure port pressure gauge copal electronics 72 40 11.5 m 5 depth 6 28.5 19 unit of display grommet m 5 72 22 1 13.5 13.5 1 r 1/4 (pt 1/4) pressure port cord connection ~ 6 10 # / - ~ 6 24 10 5 6 8 9 10 11 y l y h x lh batt 7 battery type external power dc5 ~ 10 v dc10 ~ 24 v ? d e f ? ? ? ? ? battery type external power outline dimensions unless otherwise specified, tolerance : 0.5 (unit: mm) pg-200 panel type for non-corrosive gases pg-200 stand type for non-corrosive gases switch hi b c voltage output b c switch lo b c switch hi b c external power b c electrical connection external power b c c b switch hi c b switch lo c b voltage output c b switch hi c b switch lo c b electrical connection electrical terminals are located inside. use connecting wires awg 26 or thinner one. t external power should be connected to proper terminals depending on the voltage. pg-200/pg-208 pressure gauges
7 grommet 27 (p 18) o ring (fluoro C rubber) 40 11.5 batt pressure gauge copal electronics 72 72 311 11 sus 316 pressure port (sus 316l) diaphragm unit of display 151 28.5 sus 316 g 3/8 (pf 3/8) circuit supply power external power voltage output switch lo switch hi lcd sensor main circuit pressure indication switch lo switch hi pressure indication lcd sensor main circuit pressure pressure power batt lh set lo on hi span zerp digital 3 1/2 digits low battery indication sw output indication decimal point power sw set sw lo setting vr hi setting vr zero adjustment vr span adjustment vr polarity pg-200/pg-208 pressure gauges pg-208 stand type for corrosive gases or liquids inside of a panel internal electrical schematics battery type external power type cord connection 5 ~ v 10 c o m ~ v 24 10 5 6 8 9 10 11 y l y h x electrical terminals are located inside. use connecting wires awg 26 or thinner one. battery type external power dc5 ~ 10 v dc10 ~ 24 v ? d e f ? ? ? ? ? external power b c c b switch hi c b switch lo c b voltage output c b switch hi c b switch lo c b electrical connection t external power should be connected to proper terminals depending on voltage. t no switch lo as to panel type. outline dimensions unless otherwise specified, tolerance : 0.5 (unit: mm) extra care should be taken with the diaphragm part. do not touch the diaphragm directly to avoid damaging the diaphragm.
|
