slot ten 10 mm tunable inductors document 113-1 document 113-1 revised 08/20/12 these versatile coilcraft variable inductors operate over a wide range of frequencies. standard inductance values are available from less than 1 h to over 1 mh. coilcraft slot ten rf coils come in an international 10 mm package. their precision-molded slotted bobbins ensure tight tolerances and high stability. a variety of magnetic and electrostatic shielding options are offered. slot ten coils are tuned by means of ferrite or powdered iron tuning cores. coilcraft designers kit m100 contains 18 shielded and 18 unshielded coils (3 each) plus extra cores and sleeves to create all of the standard values shown. to order, please contact coilcraft or purchase on-line at http://order.coilcraft.com. unshielded (styles 1 and 2) 3t ool si n1 tuning wrench trituner see index this product will not be available in an rohs-compliant version. core contains lead. terminations pins: tin-lead over tin over copper over iron shield can tabs: tin-silver over nickel over brass resistance to soldering heat: wave solder only. recommended maximum board surface temperature of 168c (334f) for no more than three seconds. pre-heating is recommended to minimize time over the solder nozzle. with shielded cans (styles 3 ,4 and 5) us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2012 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check out web site for latest infor mation.
document 113-2 selection guide coilcraft slot ten coils come in fve different styles. consult this table for the inductance range, relative q and shielding options of each style. then use the appropriate specifcation chart to pick a specifc part number. electrostatic magnetic recommended style l (h) shield shield frequency tuning core relative q relative cost style 1 0.8 C 624 no no higher iron hi low style 2 0.8 C 927 no no ferrite hi low style 3 0.7 C 450 yes no iron low med style 4 0.8 C 624 yes yes (iron) iron med hi style 5 0.9 C 1143 yes yes (ferrite) lower ferrite med hi notes: 1. all readings taken on agilent/hp 4342-a q meter. 2. l min is achieved at maximum extension of the core toward pc board. complete tuning range is reached within the boundaries of the coil form. 3. all specifcations are at standard q meter frequencies. l and q read - ings change with frequency. 4. unshielded parts are coated with lacquer to protect the winding. 5. shielded parts have a sleeve insert to protect the winding. 6. operating temperature range C40c to +85c. 7. electrical specifcations at 25c. style 1 unshielded with carbonyl e core q min test part number color l min (h) l max (h) l nom (h) @ l nom frequency slot ten-1-01 brown 0.800 1.2 1.0 48 7.9 mhz slot ten-1-02 red 1.2 1.8 1.5 50 7.9 mhz slot ten-1-03 orange 1.76 2.64 2.2 56 7.9 mhz slot ten-1-04 yellow 2.56 3.84 3.2 54 7.9 mhz slot ten-1-05 green 3.6 5.4 4.5 54 7.9 mhz slot ten-1-06 blue 5.2 7.8 6.5 51 7.9 mhz slot ten-1-07 violet 7.6 11.4 9.5 48 7.9 mhz slot ten-1-08 gray 11.2 16.8 14.0 38 2.5 mhz slot ten-1-09 white 16.0 24.0 20.0 38 2.5 mhz slot ten-1-10 black* 22.4 33.6 28.0 38 2.5 mhz slot ten-1-11 brown* 32.0 48.0 40.0 38 2.5 mhz slot ten-1-12 red* 46.4 69.6 58.0 47 2.5 mhz slot ten-1-13 orange* 67.2 100.2 84.0 48 2.5 mhz slot ten-1-14 yellow* 96 144 120.0 40 790 khz slot ten-1-15 green* 137.6 206.4 172.0 34 790 khz slot ten-1-16 blue* 200 300 250.0 39 790 khz slot ten-1-17 violet* 280 432 360.0 30 790 khz slot ten-1-18 gray* 416 624 520.0 35 790 khz * coils 10 thru 18 have a brown color dot on bottom of coil base. style 2 unshielded with ferrite core q min test part number color l min (h) l max (h) l nom (h) @ l nom frequency slot ten-2-01 brown 0.80 1.7 1.2 47 7.9 mhz slot ten-2-02 red 1.25 2.75 2.0 48 7.9 mhz slot ten-2-03 orange 1.75 4.0 2.9 48 7.9 mhz slot ten-2-04 yellow 2.4 5.4 3.9 47 7.9 mhz slot ten-2-05 green 3.5 7.8 5.6 47 7.9 mhz slot ten-2-06 blue 4.7 10.6 7.6 46 7.9 mhz slot ten-2-07 violet 7.4 15.6 11.5 38 2.5 mhz slot ten-2-08 gray 11 25 18.2 40 2.5 mhz slot ten-2-09 white 16 35 25.3 40 2.5 mhz slot ten-2-10 black* 22 50 36.5 40 2.5 mhz slot ten-2-11 brown* 33 72 52.5 39 2.5 mhz slot ten-2-12 red* 46 103 74.8 51 2.5 mhz slot ten-2-13 orange* 66 136 100 40 790 khz slot ten-2-14 yellow* 95 198 146 44 790 khz slot ten-2-15 green* 136 297 216 40 790 khz slot ten-2-16 blue* 198 426 312 45 790 khz slot ten-2-17 violet* 286 630 530 33 790 khz slot ten-2-18 gray* 418 927 790 38 790 khz * coils 10 thru 18 have a brown color dot on bottom of coil base. document 113-2 revised 05/13/11 us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2012 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check out web site for latest infor mation.
document 113-3 style 3 shielded with carbonyl e core and plastic sleeve q min test part number color l min (h) l max (h) l nom (h) @ l nom frequency slot ten-3-01 brown 0.70 0.94 0.82 65 7.9 mhz slot ten-3-02 red 1.05 1.41 1.23 37 7.9 mhz slot ten-3-03 orange 1.5 2.0 1.75 40 7.9 mhz slot ten-3-04 yellow 2.04 2.76 2.4 40 7.9 mhz slot ten-3-05 green 2.9 3.9 3.4 39 7.9 mhz slot ten-3-06 blue 4.25 5.75 5.0 38 7.9 mhz slot ten-3-07 violet 6 8.2 7.1 35 7.9 mhz slot ten-3-08 gray 9.4 12.6 11.0 25 2.5 mhz slot ten-3-09 white 12.8 17.2 15.0 25 2.5 mhz slot ten-3-10 black* 18.7 25.3 22.0 26 2.5 mhz slot ten-3-11 brown* 26.4 35.6 31.0 25 2.5 mhz slot ten-3-12 red* 37.4 50.6 44 29 2.5 mhz slot ten-3-13 orange* 52.7 71.3 62 30 2.5 mhz slot ten-3-14 yellow* 79 105 92 28 2.5 mhz slot ten-3-15 green* 108.8 147.2 128 18 790 khz slot ten-3-16 blue* 155 208 182 20 790 khz slot ten-3-17 violet* 230 310 270 16 790 khz slot ten-3-18 gray* 336 450 390 18 790 khz * coils 10 thru 18 have a brown color dot on bottom of coil base. style 4 shielded with carbonyl e core and sleeve q min test part number color l min (h) l max (h) l nom (h) @ l nom frequency slot ten-4-01 brown 0.80 1.2 1.0 44 7.9 mhz slot ten-4-02 red 1.2 1.8 1.5 45 7.9 mhz slot ten-4-03 orange 1.76 2.64 2.2 48 7.9 mhz slot ten-4-04 yellow 2.56 3.84 3.2 48 7.9 mhz slot ten-4-05 green 3.6 5.4 4.5 46 7.9 mhz slot ten-4-06 blue 5.2 7.8 6.5 43 7.9 mhz slot ten-4-07 violet 7.6 11.4 9.5 40 7.9 mhz slot ten-4-08 gray 11.2 16.8 14 32 2.5 mhz slot ten-4-09 white 16.0 24.0 20 33 2.5 mhz slot ten-4-10 black* 22.4 33.6 28 32 2.5 mhz slot ten-4-11 brown* 32.0 48.0 40 32 2.5 mhz slot ten-4-12 red* 46.4 69.6 58 40 2.5 mhz slot ten-4-13 orange* 67.2 100.8 85 40 2.5 mhz slot ten-4-14 yellow* 96 144 120 33 790 khz slot ten-4-15 green* 137.6 206.4 172 28 790 khz slot ten-4-16 blue* 200 300 250 32 790 khz slot ten-4-17 violet* 288 432 360 26 790 khz slot ten-4-18 gray* 416 624 520 29 790 khz * coils 10 thru 18 have a brown color dot on bottom of coil base. style 5 shielded with ferrite core and sleeve q min test part number color l min (h) l max (h) l nom (h) @ l nom frequency slot ten-5-01 brown 0.86 2.0 1.4 43 7.9 mhz slot ten-5-02 red 1.27 3.25 2.25 44 7.9 mhz slot ten-5-03 orange 1.83 4.6 3.25 41 7.9 mhz slot ten-5-04 yellow 2.48 6.4 4.5 40 7.9 mhz slot ten-5-05 green 3.58 9.3 6.5 40 7.9 mhz slot ten-5-06 blue 5.0 12.7 8.8 38 7.9 mhz slot ten-5-07 violet 7.7 18.4 13.0 30 2.5 mhz slot ten-5-08 gray 12.0 30.0 20.9 35 2.5 mhz slot ten-5-09 white 16 42 29.4 34 2.5 mhz slot ten-5-10 black* 25 60 42.3 32 2.5 mhz slot ten-5-11 brown* 36 90 62.8 30 2.5 mhz slot ten-5-12 red* 48 126 87.2 42 2.5 mhz slot ten-5-13 orange* 72 163 116 35 790 khz slot ten-5-14 yellow* 102 238 168 36 790 khz slot ten-5-15 green* 147 360 252 36 790 khz slot ten-5-16 blue* 215 522 312 45 790 khz slot ten-5-17 violet* 303 765 530 33 790 khz slot ten-5-18 gray* 440 1143 790 38 790 khz * coils 10 thru 18 have a brown color dot on bottom of coil base. document 113-3 revised 05/13/11 us uk t aiwan china singapore +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-eur ope.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg ? coilcraft inc. 2012 this pr oduct may not be used in medical or high risk applications without prior coilcraft appr oval. specification subject to change without notice. please check out web site for latest infor mation.
|
