note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0180a doc solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1/ 1n70 __ __ __ screening 2/ __ = not screened tx = tx level txv = txv level s = s level package type fl = flat leads voltage/family 66 = 100v 67 = 150v 68 = 200v 1N7066FL thru 1n7068fl series 10 amp solar array bypass / blocking diode 100 200 volts features: ? flat leads provides stress relief (customizable to customer specifications) ? ideal for welding to bus bar ? solid silver leads eliminates plating issues ? piv to 200 volts ? high surge current: 350 a maximum ? hermetically sealed ? low forward voltage drop .95 @10a ? void free ceramic frit glass construction ? high temperature category i eutectic metallurgical bond ? hyper fast reverse recovery: 30ns maximum 4/ ? tx, txv, and s-level screening available 2/ ? higher current replacements for: 1n5807, 1n5809, 1n5811 typical applications: ? photovoltaic (pv) panels maximum ratings 3 / symbol value unit peak repetitive reverse voltage and dc blocking voltage 1N7066FL 1n7067fl 1n7068fl v rrm v rwm v r 100 150 200 volts average rectified forward current (axial t l 55c) 5/ i o 10 amps peak surge current (8.3 ms pulse, half sine wave, superimposed on io, v rwm = rated, allow junction to reach equilibrium between pulses, t a = 25c) i fsm 350 amps operating & storage temperature t j and t stg -65 to +175 c thermal resistance junction to lead, l =.125" r jl 8 c/w notes: 1/ for ordering information, price, operating curves, and availability- contact factory. 2/ screening based on mil-prf-19500. screening flows available on request. 3/ unless otherwise specified, all electrical characteristics @ 25c. 4/ i f = 1a, i r = 1a, i rr = 0.1a, t a = 25c 5/ operating at higher i o currents may be achieved based on specific application and device mounting if t j is maintained below 175c. flat leads
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0180a doc electrical characteristics 3 / characteristics symbol limit unit instantaneous forward voltage drop 300 s pulse i f = 6.0 adc i f = 10 adc i f = 20 adc i f = 6.0 adc, t a = +125c i f = 6.0 adc, t a = +150c i f = 6.0 adc, t a = -55c v f1 v f2 v f3 v f4 v f5 v f6 0.900 0.950 1.050 0.850 0.780 1.050 vdc reverse leakage current at rated v r , 300 s pulse t a = +25c t a = +125c t a = +150c i r1 i r2 i r3 1 100 500 a a a breakdown voltage i r = 100 a 1n7066 1n7067 1n7068 bv r 110 160 210 v junction capacitance v r = 10 vdc, f= 1 mhz c j 80 pf reverse recovery time i f = 1 a, i r = 1 a, i rr = 0.1 a t rr 30 ns solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com 1N7066FL thru 1n7068fl series
note: all specifications are subjec t to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0180a doc package outlines : flat leads (fl) dimensions (inches) dim. min max ?a .135 .165 b .090 .110 c .011 .015 d .080 .095 e .620 .660 f ref .090 g .295 .335 h ref r.03 i ref 120 notes: 1/ for ordering information, price, operatin g curves, and availability- contact factory. 2/ screening based on mil-prf-19500. screening flows available on request. 3/ unless otherwise specified, all electrical characteristics @ 25c. 4/ i f = 1a, i r = 1a, i rr = 0.1a, t a = 25c 5/ operating at higher i o currents may be achieved based on specific application and device mounting if t j is maintained below 175c. solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com 1N7066FL thru 1n7068fl series
|