lan-mate series description : 1000 base-t rj45 1 x 1 integrated magnetics connector p/n: kla1t109-43 lf bothhand usa page :1/2 a1(12/05) feature l rj-45 needs to be matched fcc standard. l complies with requirement of ieee 802.3ab standards. l rj-45 connector integrated with transformer/impedance resistor/high voltage capacitor. l size same as rj-45 connector to save pcb board space. l reduced emi radiation to improve emi performance. l design for 1000 base transmission over utp-5 cable. l isolation @ 60hz : input to output:1500vrms. l compliance with rohs requirements. l operating temperature range: 0 to +70 . l storage temperature range: -25 to +85 . l recommended panel part number standard led forward*v(max) (typ) 3 yellow 2.6v 2.1v 4 green 2.6v 2.2v *with a forward current of 20ma electrical specifications @ 25c turns ratio (5%) cross talk (db min) part number tx rx ocl(uh min) @100khz/0.1v with 8ma dc bias 0.3-30mhz 30-60mhz 60-100mhz hi-pot (vrms) kla1t109- 43 lf 1ct:1ct 1ct:1ct 350 -40 -35 -30 1500 continue insertion loss (db max) return loss (db min) @ load 100 cmr (db min) part number 1-100mhz 1-30mhz 30-40mhz 40-50mhz 50-80mhz 1-30mhz 30-60mhz 60-125mhz kla1t109- 43 lf -1.0 -16 -13.5 -11.5 -10 -30 -25 -20 schematic www.bothhandusa.com sales@bothhandusa.com
lan-mate series description : 1000 base-t rj45 1 x 1 integrated magnetics connector p/n: kla1t109-43 lf bothhand usa page :2/2 a1(12/05) mechanical 1. plastic material : thermoplastic (ul 94v-0), black housing 2. metal shield : brass, 20u " inches thick nickel 3. spring wire : phosphor bronze with selective gold plating 4. solder pin : 0.5x0.35mm, sus430 with solder plated 5. durability : 750 mating cycles min. pcb layout mounting hole(top view) www.bothhandusa.com sales@bothhandusa.com
|
