ultralink commercial grade cable TL-092463 tl-092887 high efficiency commercial grade cable laird ultralink mobile cable is constructed with a solid center conductor for the secure a ttachment of crimp-on connectors. laird ultralink cable is insulated with a layer of low loss te flon? dielectric which withstands the high temperatures encountered in mobile a pplications. in addition laird applies a layer of easily removed friction bound aluminum foil for 100% shielding and tinned copper braid with full 95% coverage ensuring good grip to the connector's outer shell. the laird ultralink cable is jacketed in a smooth, t ough pvc ja cket and is available i n white (TL-092463) or black (tl-092887). ant-ds-ultralink-cable 0615 any information furnished by laird inc. and its agents is believed to be accurate and reliable. all specifications are subject to change without notice. responsibility for the use and application of laird materials rests with the end user, since laird and its agents cannot be aware of all potential uses. laird makes no warranties as to the fitness, merchantability or suitability of any laird materials or products for any specific or general uses. laird shall not be liable for incidental or consequential damages of any kind. all laird products are sold pursuant to the laird terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request. ? copyright 201 6 laird inc. all rights reserved. laird, laird technologies, the laird logo, and other marks are trademarks or registered trademarks of laird inc. or an affiliate company thereof. other product or service names may be the property of third parties. nothing herein provides a license under any laird or any third party intellectual property rights. www.lairdtech.com americas: +1.847 839.6925 ias-americaseastsales@lairdtech.com europe: +44.1628.858941 ias-eusales@lairdtech.com asia: ias-asiasales@lairdtech.com parameter impedance 50 2.0 ohms velocity of propagation 80% center conductor solid copper, 0.037 0.00 1 shield #1 foil, aluminum/poly tape (adhered to dielectric) shield #2 braid, 90% 36-awg tin/copper outer jacket white or black pvc, lead-free outer diameter 0.178 0.006 attenuation db/100 12.5 db @ 900 mhz 23.6 db @ 2.5 ghz 27.5 db @ 4.0 ghz 35.0 db @ 6.0 ghz installation temperature 0c to +65c operating temperature -20c to +65c specific ations outer jacket rating ul type cm
|
