vdmr10.0, vdmo10.0, vdmy10.0, vdmg10.0 www.vishay.com vishay semiconductors rev. 1.2, 29-nov-13 1 document number: 84196 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 standard 7-segment smd display 10 mm description the vdm.10.0 series are 10 mm smd seven segment led displays in a very compact package. the devices utilize alingap on gaas chip technology. product group and package data ? product group: display ?package: 10 mm ? product series: smd ? angle of half intensity: 50 features ? evenly lighted segments ? grey package surface ? untinted segments ? luminous intensity categorized ? yellow, green, and soft orange categorized for color ? wide viewing angle ? suitable for dc and high peak current ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ?panel meters ? test- and measure-equipment ? point-of-sale terminals ? control units parts table part color luminous intensity (cd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) circuitry min. typ. max. min. typ. max. min. typ. max. vdmr10a0 super red 180 650 - 1 - 631 - 20 - 2.0 2.6 20 common anode vdmr10c0 super red 180 650 - 1 - 631 - 20 - 2.0 2.6 20 common cathode VDMO10A0 soft orange 180 650 - 1 - 605 - 20 - 2.0 2.6 20 common anode vdmo10c0 soft orange 180 650 - 1 - 605 - 20 - 2.0 2.6 20 common cathode vdmy10a0 yellow 1100 2750 - 1 - 589 - 20 - 2.0 2.6 20 common anode vdmy10c0 yellow 1100 2750 - 1 - 589 - 20 - 2.0 2.6 20 common cathode vdmg10a0 green 110 400 - 1 - 572 - 20 - 2.0 2.6 20 common anode vdmg10c0 green 110 400 - 1 - 572 - 20 - 2.0 2.6 20 common cathode absolute maximum ratings (t amb = 25 c, unless otherwise specified) vdmr10.0, vdmo10.0, vdmy10.0, vdmg10.0 parameter test condition symbol value unit power dissipa tion per segment p v 70 mw peak forward current per segment (frequency 1 khz, 10 % duty cycle) i f 60 ma continous forward current per segment i f 25 ma forward current derating from 25 c 0.28 ma/c operating temperature range t amb -35 to +105 c storage temperature range t stg -35 to +105 c iron soldering conditions: 1/16" be low seating plane for 3 s at 260 c
vdmr10.0, vdmo10.0, vdmy10.0, vdmg10.0 www.vishay.com vishay semiconductors rev. 1.2, 29-nov-13 2 document number: 84196 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) luminous intensity is measured with a light sensor and filter combination that approximates the cie eye-response curve. (2) reverse voltage is only for ir test.it can not continue to operate at this situation. (3) cross talk specification 2.5 %. notes (1) luminous intensity is measured with a light sensor and filter combination that approximates the cie eye-response curve. (2) reverse voltage is only for ir test.it can not continue to operate at this situation. (3) cross talk specification 2.5 %. notes (1) luminous intensity is measured with a light sensor and filter combination that approximates the cie eye-response curve. (2) reverse voltage is only for ir test.it can not continue to operate at this situation. (3) cross talk specification 2.5 %. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vdmr10a0, vdmr10c0, super red parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 1 ma vdmr10a0 i v 180 650 - cd vdmr10c0 i f = 10 ma vdmr10a0 i v - 8250 - cd vdmr10c0 dominant wavelength i f = 20 ma vdmr10a0, vdmr10c0 d - 631 - nm peak emmision wavelength i f = 20 ma p - 639 - nm spectral line half-width i f = 10 ma ? -20- forward voltage per segment i f = 20 ma v f -2.02.6v reverse current per segment (2) v r = 5 v i r - - 100 a luminous intensity matching ratio i f = 10 ma i v-m --2:1 optical and electrical characteristics (t amb = 25 c, unless otherwise specified) VDMO10A0, vdmo10 c0, soft orange parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 1 ma VDMO10A0 i v 180 650 - cd vdmo10c0 i f = 10 ma VDMO10A0 i v - 8250 - cd vdmo10c0 dominant wavelength i f = 20 ma VDMO10A0, vdmo10c0 d - 605 - nm peak emmision wavelength i f = 20 ma p - 611 - nm spectral line half-width i f = 10 ma ? -17- forward voltage per segment i f = 20 ma v f -2.02.6v reverse current per segment (2) v r = 5 v i r - - 100 a luminous intensity matching ratio i f = 10 ma i v-m --2:1 optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vdmy10a0, vdmy10c0, yellow parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 1 ma vdmy10a0 i v 1100 2750 - cd vdmy10c0 i f = 10 ma vdmy10a0 i v - 30 250 - cd vdmy10c0 dominant wavelength i f = 20 ma vdmy10a0, vdmy10c0 d - 589 - nm peak emmision wavelength i f = 20 ma p - 588 - nm spectral line half-width i f = 10 ma ? -15- forward voltage per segment i f = 20 ma v f -2.02.6v reverse current per segment (2) v r = 5 v i r - - 100 a luminous intensity matching ratio i f = 10 ma i v-m --2:1
vdmr10.0, vdmo10.0, vdmy10.0, vdmg10.0 www.vishay.com vishay semiconductors rev. 1.2, 29-nov-13 3 document number: 84196 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes (1) luminous intensity is measured with a light sensor and filter combination that approximates the cie eye-response curve. (2) reverse voltage is only for ir test.it can not continue to operate at this situation. (3) cross talk specification 2.5 %. note ? the above type numbers repr esent the order groups which include only a few brightness groups. only one group will be shipped in one tube (the re will be no mixing of two groups in one tube). in order to ensure availability, single brightness groups will not be orderable. note ? wavelengths are tested at a current pulse duration of 25 ms. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) vdmg10a0, vdmg10c0, green parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 1 ma vdmg10a0 i v 110 400 - cd vdmg10c0 i f = 10 ma vdmg10a0 i v - 4400 - cd vdmg10c0 dominant wavelength i f = 20 ma vdmg10a0, vdmg10c0 d - 572 - nm peak emmision wavelength i f = 20 ma p - 571 - nm spectral line half-width i f = 10 ma ? -15- forward voltage per segment i f = 20 ma v f -2.02.6v reverse current per segment (2) v r = 5 v i r - - 100 a luminous intensity matching ratio i f = 10 ma i v-m --2:1 luminous intensity classification group light intensity (cd) standard min. max. d 110 220 e 180 360 f 280 560 g 450 900 h 700 1400 i 1100 2200 k 1800 3600 l 2800 5600 m 4500 9000 n 7000 14 000 p 11 000 22 000 q 18 000 36 000 r 28 000 56 000 s 45 000 90 000 color classification group soft orange yellow green min. max. min. max. min. max. 1 598 601 581 584 - - 2 600 603 583 586 - - 3 602 605 585 588 562 565 4 604 607 587 590 564 567 5 606 609 589 592 566 569 6 608 611 591 594 568 571 7 ----570573 8 ----572575
vdmr10.0, vdmo10.0, vdmy10.0, vdmg10.0 www.vishay.com vishay semiconductors rev. 1.2, 29-nov-13 4 document number: 84196 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - relative intensity vs. wavelength fig. 3 - relative luminous intensity vs. forward current fig. 4 - forward current vs. forward voltage fig. 5 - peak current vs. duty cycle t amb - ambient temperature (c) 0 10 20 25 30 0 20 40 60 80 100 120 i f - forward current (ma) 5 15 560 600 640 660 680 - wavelength (nm) 0 0.2 0.4 0.6 0.8 1.2 i rel - relative intensity 1.0 s oft orange s uper red green yellow 620 540 520 580 i f - forward current (ma) 30 0 0.5 1.0 3.0 i - relative luminous intensity vrel 10 0 5 15 20 (normalized to 1 at 10 ma) 25 1.5 2.5 2.0 1 10 100 v f - forward voltage (v) i - forward current (ma) f 3.5 3.0 2.5 2.0 1.5 1.0 110 10 100 100 duty cycle % (frequency 1 khz) i peak - peak current (ma)
vdmr10.0, vdmo10.0, vdmy10.0, vdmg10.0 www.vishay.com vishay semiconductors rev. 1.2, 29-nov-13 5 document number: 84196 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters specifications according to din technical drawings drawing-no.: 6.544-5425.01-4 issue: 2; 02.10.13 9.8 10 6 15 5 1 6 10 13 15 10 0.6 3.75 ?1.2 1.9 4.5 1.55 0.1 1 r0.65 part no date code bin code 1 0 1 . 2 6 . 2 a b c d e f g dp a 764219105 bcdef gdp 3, 8 (c) a 764219105 bcdef gdp 3, 8 (a) tolerances are 0.25 mm unless otherwise mentioned plastic pins burr max. 0.14 mm
vdmr10.0, vdmo10.0, vdmy10.0, vdmg10.0 www.vishay.com vishay semiconductors rev. 1.2, 29-nov-13 6 document number: 84196 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tape and reel dimensions in millimeters tape in box
vdmr10.0, vdmo10.0, vdmy10.0, vdmg10.0 www.vishay.com vishay semiconductors rev. 1.2, 29-nov-13 7 document number: 84196 for technical questions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bar code product label (example only) a) 2d barcode b) vishay part number c) quantity d) ptc = selection code (binning) e) code of manufacturing plant f) batch = date code: year/week/plant code g) region code h) sl = sales location i) terminations finishing k) lead (pb)-free symbol l) halogen-free symbol m) rohs symbol soldering profile fig. 6 - vishay lead (pb)-free reflow soldering profile (acc. to j-std-020c) recommended solder pad msl label soldering iron (one time only) temperature 300 c max. soldering time 3 s max. a b d c e f g h i m l k 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 255 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 255 c 19470-5 ir reflow soldering profile for lead (pb)-free soldering preconditioning acc. to jedec level 3 max. 2 cycles allowed 3 1.65 4 x 1.9 = 7.6 15
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
