for more information, please visit the product page. ????????? cui .com 05/06/2015 1 of 4 series : pse-800 description: ac-dc hot-swap power supply model output voltage output current output power ripple and noise effciency 1 (vdc) max (a) max (w) max (mvp-p) typ (%) pse-800-48 48 16.67 800 480 90 notes: 1. at 230 vac input. o f n o r t h a m e r i c a , i n c . t u v r h e i n l a n d c us part number key base number reserved for custom confgurations pse-800 - 48 - cxx output voltage features ? up to 800 w continuous power ? 1u x 2u form factor ? i 2 c communication for monitoring and control ? redundant (n+1) operation ? blind mate connections for hot-swap ? power factor correction ? 3.3 vdc (0.5 a) standby voltage ? droop current sharing or forced current sharing (optional) ? single i/o connector for ac input, dc output and signals ? remote on/off control, power good signal ? efficiency up to 90% date page
for more information, please visit the product page. cui .com date 05/06/2015 page 2 of 4 cui inc series : pse-800 description: ac-dc hot-swap power supply input parameter conditions/description min typ max units voltage 90 264 vac frequency 50 60 hz current at 90 vac, full load 11 a inrush current half cycle, cold start, 25c at 115 vac, 60 hz at 230 vac, 50 hz 20 40 a a leakage current 1.5 marms power factor correction 0.95 0.98 output - v1 ( main output ) parameter conditions/description min typ max units total regulation 3 % transient response 25% step load, 1a/s slew rate, recovery to 1% within 1 ms 3 % hold-up time at full load in redundant operation 12 20 ms ms output - v2 ( standby output ) parameter conditions/description min typ max units output voltage 3.3 vdc output current 0 0.5 a ripple and noise 33 mvp-p total regulation 2.5 % status & control parameter conditions/description min typ max units i 2 c interface scl 100 khz clock rate, sda data line remote sense main output remote enable active low enables main output, last-mate/ frst-break enable pin current share droop share; active current share option status ac ok, dc ok and otp_ok (open collector, active low = ok); and ps_present led indicator ac ok & dc ok indicators protections parameter conditions/description min typ max units over voltage protection v1 v2 115 60 vdc % over current protection latching, shutdown after 2 s 120 % over temperature protection output shut down, auto recovery safety & compliance parameter conditions/description min typ max units safety approvals ctuvus ul60950-1, ce (lvd) emissions fcc 15 sub part j, class a, en55022 class a, vcci class a harmonic compliance en61000-3-2 class a surges (mains) iec/en 61000-4-5 voltage dips/interruptions iec/en 61000-4-11
for more information, please visit the product page. cui .com date 05/06/2015 page 3 of 4 cui inc series : pse-800 description: ac-dc hot-swap power supply safety & compliance ( continued ) parameter conditions/description min typ max units mtbf as per telcordia sr332, 40c, full load 500,000 hours rohs 2011/65/eu environmental parameter conditions/description min typ max units operating temperature 0 55 c storage temperature -40 85 c mechanical parameter conditions/description min typ max units dimensions 10.00 x 3.30 x 1.60 (254 x 83.8 x 40.6 mm) inches cooling / airfow integral high performance 38 mm fan, inlet at face; exhaust at connector input / output connector fci p/n 51939-420lf mates with fci p/n 51915-192lf hot-swap capability fully hot-swappable, blind mate connector mechanical drawing units: inches [mm] tolerance: x.xx 0.02 [0.50] x.xxx 0.010 [0.25] input/output connector pins function pins function pins function pins function pins function pins function pins function p1 +48 v a1 +v1 sense a2 eeprom a0 a3 1 n/c a4 ac ok a5 signal return a6 +3.3 vsb return p2 -48 v b1 -v1 sense b2 eeprom a1 b3 1 n/c b4 dc ok b5 eeprom clock scl b6 reserved p3 fg c1 ishare c2 eeprom a2 c3 1 n/c c4 ps_present c5 eeprom data (sda) c6 reserved p4 ac neutral d1 v program d2 n/c d3 1 n/c d4 otp ok d5 +3.3 vsb d6 enable (short pin) p5 ac line -- -- -- -- -- -- -- -- -- -- -- -- note: 1. poe isolation barrier - no traces to be routed between these pins and any others.
for more information, please visit the product page. date 05/06/2015 page 4 of 4 cui inc series : pse-800 description: ac-dc hot-swap power supply cui offers a two (2) year limited warranty. complete warranty information is listed on our website. cui reserves the right to make changes to the product at any time without notice. information provided by cui is believed to be accurate and reliable. however, no responsibility is assumed by cui for its use, nor for any infringements of patents or other rights of third parties which may result from its use. cui products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safet y or effectiveness. headquarters 20050 sw 112th ave. tualatin, or 97062 800.275.4899 fax 503.612.2383 cui .com techsupport@cui.com rev. description date 1.0 initial release 05/06/2015 the revision history provided is for informational purposes only and is believed to be accurate. revision history
|
