page 1 of 2 www.pduke.com 2014/4/30 dur01 series 1watts dc-dc converter output specifications output power 1 watt, max. voltage accuracy full load and nominal vin 5% minimum load (note 5) 10% of fl. line regulation ll to hl at full load 3.3v & 5v output others 1.3%/1% of vin 1.2%/1% of vin load regulation 10% to 100% fl 3.3v & 5v output others 15% 10% ripple and noise 20mhz bandwidth see table temperature coefficient 0.1% / oc, max. short circuit protection (note 7) 1 sec. general specifications efficiency see table isolation voltage 1000vdc, min. isolation resistance 500vdc 10 9 ohms, min. isolation capacitance 80pf switching frequency 90khz design meet safety standard iec60950-1, ul60950-1, & en60950-1 case material non-conductive black plastic potting material epoxy (ul94 v-0) dimensions 0.45 x 0.24 x 0.40 inch (11.5 x 6.0 x 10.2 mm) weight 1.5g (0.053oz) mtbf (note 1) bellcore tr-nwt-000332 mil-hdbk-217f 1.137 x 10 9 hrs 9.850 x 10 5 hrs input specifications input voltage range 3.3v nominal input 5v nominal input 12v nominal input 15v nominal input 24v nominal input 3.0 ? 3.6vdc 4.5 ? 5.5vdc 10.8 ? 13.2vdc 13.5 ? 16.5vdc 21.6 ? 26.4vdc input filter capacito r environmental specifications operating ambient temperature -40oc ~ +85oc (non-derating) storage temperature range -55oc ~ +125oc thermal shock mil-std-810f vibration mil-std-810f relative humidity 5% to 95% rh technical specification all specifications are typi cal at nominal input, full load and 25oc otherwise noted applications wireless network telecom/datacom industry control system measurement equipment semiconductor equipment features ? 1 watt unregulated output power ? output current up to 303ma ? 4 pin single-in-line package (sip) ? high efficiency for low power application ? input range from 3.0vdc to 3.6vdc, 4.5vdc to 5.5vdc, 10.8vdc to 13.2vdc, 13.5vdc to 16.5vdc and 21.6vdc to 26.4vdc ? ul 94-v0 non-conducted case ? internal input & output filter ? input / output isolation up to 1kvdc ? safety meets ul60950-1, en60950-1, & iec60950-1 ? ce marked ? compliant to rohs ii & reach description the dur01 series are the standard building blocks for on-board distributed power systems. they are ideally suited to provide single supply on primarily digital boards with added benefit of galvanic isolation to reduce switching noise. all of the rated power may be drawn from a single pin provided the total load does not exceed 1 watt.
page 2 of 2 www.pduke.com 2014/4/30 dur01 series 1watts dc-dc converter mechanical drawing standard pin single 1 -input 2 +input 3 -output 4 +output output current model number input range output voltage min. load full load output (3) ripple & noise no load (2) input current eff (3) (%) capacitor load max (4) dur01-33s33 3.0 ? 3.6 vdc 3.3 vdc 30.3ma 303ma 100mvp-p 42ma 68 150 f dur01-33s05 3.0 ? 3.6 vdc 5 vdc 20ma 200ma 100mvp-p 38ma 70 100 f dur01-33s09 3.0 ? 3.6 vdc 9 vdc 11.1ma 111ma 100mvp-p 45ma 71 22 f dur01-33s12 3.0 ? 3.6 vdc 12 vdc 8.4ma 84ma 100mvp-p 45ma 72 47 f dur01-33s15 3.0 ? 3.6 vdc 15 vdc 6.6ma 66ma 100mvp-p 45ma 75 33 f dur01-05s33 4.5 ? 5.5 vdc 3.3 vdc 30.3ma 303ma 100mvp-p 25ma 68 150 f dur01-05s05 4.5 ? 5.5 vdc 5 vdc 20ma 200ma 100mvp-p 25ma 70 100 f dur01-05s09 4.5 ? 5.5 vdc 9 vdc 11.1ma 111ma 100mvp-p 25ma 74 22 f dur01-05s12 4.5 ? 5.5 vdc 12 vdc 8.4ma 84ma 100mvp-p 25ma 78 47 f DUR01-05S15 4.5 ? 5.5 vdc 15 vdc 6.6ma 66ma 100mvp-p 24ma 80 33 f dur01-09s09 8.1 ? 9.9 vdc 9 vdc 11.1ma 111ma 100mvp-p 20ma 74 22 f dur01-12s33 10.8 ? 13.2 vdc 3.3 vdc 30.3ma 303ma 100mvp-p 14ma 68 150 f dur01-12s05 10.8 ? 13.2 vdc 5 vdc 20ma 200ma 100mvp-p 10ma 70 100 f dur01-12s09 10.8 ? 13.2 vdc 9 vdc 11.1ma 111ma 100mvp-p 13ma 74 22 f dur01-12s12 10.8 ? 13.2 vdc 12 vdc 8.4ma 84ma 100mvp-p 14ma 78 47 f dur01-12s15 10.8 ? 13.2 vdc 15 vdc 6.6ma 66ma 100mvp-p 13ma 80 33 f dur01-15s33 13.5 ? 16.5 vdc 3.3 vdc 30.3ma 303ma 100mvp-p 9ma 68 150 f dur01-15s05 13.5 ? 16.5 vdc 5 vdc 20ma 200ma 100mvp-p 9ma 70 100 f dur01-15s09 13.5 ? 16.5 vdc 9 vdc 11.1ma 111ma 100mvp-p 9ma 74 22 f dur01-15s12 13.5 ? 16.5 vdc 12 vdc 8.4ma 84ma 100mvp-p 8ma 78 47 f dur01-15s15 13.5 ? 16.5 vdc 15 vdc 6.6ma 66ma 100mvp-p 9ma 80 33 f dur01-24s33 21.6 ? 26.4 vdc 3.3 vdc 30.3ma 303ma 100mvp-p 6ma 70 150 f dur01-24s05 21.6 ? 26.4 vdc 5 vdc 20ma 200ma 100mvp-p 6ma 70 100 f dur01-24s09 21.6 ? 26.4 vdc 9 vdc 11.1ma 111ma 100mvp-p 6ma 74 22 f dur01-24s12 21.6 ? 26.4 vdc 12 vdc 8.4ma 84ma 100mvp-p 5ma 78 47 f dur01-24s15 21.6 ? 26.4 vdc 15 vdc 6.6ma 66ma 100mvp-p 6ma 80 33 f note 1. bellcore tr-nwt-000332. case 1: 50% stress, temperature at 40oc. mil-hdbk-217f notice2 @ta=25 oc, full load(ground, benign, controlled environment). 2. typical value at nominal input voltage and no load. 3. typical value at nominal input voltage and full load. 4. test by minimum vin and constant resistive load. 5. the output requires a minimum loading on the output to maintain specified regulation. operation under no-load condition will not dam age these devices, however they may not meet all listed specification. caution: this power module is not internally fu sed. an input line fuse must always be used. 1. all dimensions in inch (mm) tolerance: x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) 2. pin pitch tolerance 0.014 (0.35) 3. pin dimension tolerance 0.004 (0.1)
|
